Kenmore Range 362.75575691 (36275575691, 362 75575691) Parts
Genuine Ge part
By: Ge
Part Number: WB13K21
The Oven Igniter is an OEM replacement part for GE ovens, designed to ignite the bake igniter to start the heating process. This part is responsible for creating the spark that ignites the gas, providing the heat needed to cook and bake food. Over time, the oven igniter can wear out or become damaged, which can prevent the oven from heating.
Symptoms of a bad Oven Igniter include:
- The oven not heating up at all.
- The oven taking longer than normal to heat.
- Gas smell in the oven due to gas being released without ignition.
- A clicking sound without the oven igniting.
Causes of a bad igniter can include normal wear and tear over time, exposure to excessive heat or moisture, or physical damage from impact or mishandling.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
IMPORTANT: The connector plug may need to be cut off and igniter wires connected to range wires using porcelain wire connectors.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Little to no heat when baking
-
Gas igniter glows, but will not light
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Oven burner would not light broiler burner would light Michael C. • Austin , TX • January 25, 2015
If the oven burner would not light but the broiler would this indicated that the safety valve is OK. Problem had to be with the igniter. Removed the bottom panel in the oven and restarted the oven. The igniter would not glow at all. It should be brilliant red.
This is where the problem came in. I could not find the location of the model on the Kenmore range anywhere you would normally look - the back, the wiring envelope, the oven door jamb etc. Also the igniter cannot be removed from...
Read more
More
$55.77
- Compare At:
-
$98.14
- You Save:
-
$42.37
Genuine Ge part
By: Ge
Part Number: WB2X9154
The Round Style Oven or Broiler Igniter is an OEM replacement part for GE gas ranges and cooktops. It has a round design and is responsible for reliably igniting the gas burners with each use. Range: 2.5 to 3.0 amps.
Causes of a bad igniter can include wear and tear from repeated heating and cooling cycles, damage or defects in the electrical components, or issues arising from long-term exposure to high heat.
Symptoms of a bad igniter include:
- Difficulty starting or unreliable ignition of gas burners
- Burners failing to ignite with the press of the control knob
- Intermittent ignition problems
- Clicking sounds but no ignition
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Little to no heat when baking
-
Won't start
-
Gas igniter glows, but will not light
See more...
Do-It-Yourself Stories from Customers like You
Bake oven would not heat up no glow from bottom oven igniter top oven broiler heats Vicente T. • Fort Wayne , IN • February 19, 2016
There are two igniters in oven, one for top broiler and one for bake oven at bottom. Your website help me troubleshoot the problem and locate the part. ordered part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL.
No need to pull out oven as power cord can be accessed from removing bottom storage drawer.
Step 1: Remove the storage drawer from below the oven and disconnect the power cord from inside. No need...
Read more
More
$95.75
- Compare At:
-
$118.55
- You Save:
-
$22.80
Genuine Ge part
By: Ge
Part Number: WB21X5301
The Oven Sensor Assembly is an OEM part for GE ovens. This part monitors the oven's internal temperature, ensuring it matches the set temperature on the oven's controls. By accurately measuring the heat inside the oven, the sensor assembly communicates with the oven's control system to adjust the temperature accordingly.
Over time, the oven sensor can become faulty due to wear or damage, leading to inaccurate temperature readings. This can manifest as unevenly cooked food, longer cooking times, or an oven that fails to reach the desired temperature setting.
Symptoms of a bad Oven Sensor Assembly include:
- The oven temperature is inconsistent with the setting
- Food is not cooking evenly or as expected
- The oven fails to heat to the set temperature
- Error codes appearing on the oven display related to temperature regulation
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Won't start
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Wasn't commng up to temperture put it at 350 would only get up to 250 Michael U. • Dix Hills , NY • April 21, 2014
Spoke to a parts pro and told them of the problem. there were 2 possibilieies from the explanation of what the parts do. onw could have been the Range oven igniter. that wasn't it beaacause the over was lighting fine. by process of illimination it was the Oven Sensor Assembly.
Read more
More
$123.00
- Compare At:
-
$179.02
- You Save:
-
$56.02
Genuine Ge part
By: Ge
Part Number: WB48T10095
The Oven Rack is an OEM part for GE ranges, providing a sturdy and reliable platform for baking and roasting a variety of dishes. Its design allows for easy placement and removal from the oven, offering flexibility in cooking heights and accommodating different sizes of bakeware.
Causes of a bad Oven Rack can range from excessive weight being placed on the rack, exposure to high moisture levels leading to rust, or simply the age-related wear and tear that comes from regular use.
Symptoms of a bad Oven Rack include:
- Warping or bending, which can prevent the rack from sitting level in the oven and affect cooking performance.
- Rust or corrosion, which can weaken the rack's structure and potentially contaminate food.
- Difficulty sliding the rack in and out, which may indicate damage or misalignment.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014
Orded rack by stove model number. fit perfect
Read more
More
$64.35
- Compare At:
-
$76.58
- You Save:
-
$12.23
Genuine Ge part
By: Ge
Part Number: WB16K10035
This Bake Burner Assembly is an OEM part for GE ovens and ranges. The bake burner assembly includes both the igniter and the burner tube. It is responsible for producing the flame that heats the air inside the oven cavity during baking and broiling.
Causes of a bad bake burner can include wear and tear from frequent use, clogging or blockage of gas ports, or damage from exposure to high temperatures and spills.
Symptoms of a bad bake burner include:
- Uneven baking or cooking results
- The oven not heating up properly or taking too long to reach the desired temperature
- Visible damage or corrosion on the burner
- The oven emitting unusual smells or noises during operation
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
NOTE: Does not include wire connectors
Do-It-Yourself Stories from Customers like You
Gas oven taking very long time to preheat Michael P. • Bend , OR • July 30, 2016
Found a hole in the burner tube next to the igniter. Replaced both igniter and burner. Very easy repair. Works great now.
Read more
More
$148.95
- Compare At:
-
$175.76
- You Save:
-
$26.81
Genuine Ge part
By: Ge
Part Number: WB4K1
The Oven Door Gasket is an OEM part for GE ovens. This part is designed to seal the gap between the oven door and the oven body, ensuring that heat is retained during the cooking process.
Causes of a bad Oven Door Gasket can include wear and tear from regular use, resulting in cracks or gaps, heat damage causing the gasket to become brittle or melt in places, and accidental damage such as tears or cuts.
Symptoms of a failing Oven Door Gasket include:
- Visible damage or deterioration of the gasket material.
- The oven takes longer to preheat or has difficulty maintaining the set temperature.
- Increased energy usage as the oven works harder to compensate for heat loss.
- Uneven cooking results due to heat escaping from the oven cavity.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Previous tenant's apparent oven fire. Randolph M. • Chicago , IL • October 19, 2018
The previous tenant in my daughter's new apartment apparently had a grease fire of sorts in the GE XL44 gas oven. This left the insulating double glass panes so fouled up that one could not see into the oven. I removed the oven door (just lifts off the hinges) and proceeded to disassemble the door so as to get to the glass panes. That's when the real problems arose: the window seal rope, which lays around the edge of the opening to the oven, was burnt to a crisp -- see photos. The oven...
Read more
More
$43.26
- Compare At:
-
$51.91
- You Save:
-
$8.65
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WB07K10250
The Bottom Door Trim is an OEM part for GE ranges. It serves as a finishing touch, providing a seamless transition between the bottom of the oven door and the base or kick plate area.
Causes of a damaged Bottom Door Trim range from impacts during cleaning or moving the range, to general wear and tear over years of use. Exposure to high heat or spills can also contribute to the deterioration of the trim.
Symptoms of a bad Bottom Door Trim can include:
- Cracked or broken trim pieces
- Missing sections of trim
- Loose or misaligned trim
- Faded or discolored trim material
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models
Do-It-Yourself Stories from Customers like You
Rusted bottom door trim on stove Mel B. • Rossford , OH • April 19, 2014
Initially, I took it off, sanded it and painted with appliance touch-up. Still didn't look good so I ordered a replacement part and installed.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Ge part
By: Ge
Part Number: WB13K18
The Electrode is an OEM part for GE gas cooktops and ranges. This component is responsible for igniting the surface burners. They are also often referred to as spark igniters.
Causes of a bad electrode can include cracks, mineral deposits, or damage accumulated from regular usage over many heating cycles. Heat exposure degrades the material integrity of the tip.
Symptoms of a bad electrode include:
- Surface burners failing to light or ignite when turned on
- The igniter glows but flames do not ignite
- Intermittent or inconsistent ignition of burners
- Visible wear, cracks or corrosion on the electrode tip
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Stovetop kept clicking but no flame Jeffrey W. • Kendall Park , NJ • June 12, 2014
Did some research to find out it was the electrode. Pulled out the old one to match what was on your site. It came in no time at all, and the replacement was a cinch.
Read more
More
$39.95
- Compare At:
-
$47.54
- You Save:
-
$7.59
Genuine Ge part
By: Ge
Part Number: WB02K10158
The Drawer Support is an OEM part for GE ovens. This component provides structural stability and support to the oven drawer, ensuring it slides in and out smoothly and securely holds baking pans and other items stored within.
Causes of a bad drawer support can include regular wear and tear, excessive weight placed on the drawer, or physical damage from impacts or misalignment.
Symptoms of a bad drawer support include:
- Difficulty in opening or closing the oven drawer
- The drawer sagging or appearing misaligned
- Unstable or wobbly drawer when in use
- Noise or friction when sliding the drawer
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The right side slide support for the bottom drawer broke my wife puts some heavy stuff in there and it gave out Anthony W. • Bedford , PA • November 14, 2015
Bought the drawer support, unscrewed the screw with a socket wrench, installed the new drawer support, wala! Took 1 minute. Moral to the story, don't overload that bottom drawer. Metal cookie sheets or the broiler pan is okay, but not big ceramic baking trays, they're too heavy for the nylon drawer supports.
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB08T10026
The Receptacle Push-In is an OEM replacement part for GE ranges. This component securely holds the electrical receptacle/plug in place on the back of the range. Proper functioning of the receptacle push-in allows for a stable electrical connection and safe cord positioning.
Causes of a bad receptacle push-in include normal wear over time, bending/stress on the receptacle area, or damage affecting its securing ability.
Symptoms of a bad receptacle push-in are:
- Loose or wobbly electrical plug connection
- Exposed wiring or fragile cord positioning
- Tripped breakers or recurring electrical issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Wire connecting from strove to light fixture sparked out Joanne C. • Hudson , FL • October 30, 2015
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now.
Would definitely call again if I needed assistance.
Read more
More
$7.45
- Compare At:
-
$8.36
- You Save:
-
$0.91
Genuine Ge part
By: Ge
Part Number: WB2K68
The Oven Drawer Glide is an OEM replacement part for GE electric and gas ranges. It functions as the suspension mechanism facilitating smooth extension and retraction of range drawer shelves.
Causes of a bad drawer glide can include wear from years of use, damage from heavy pots or pans straining the glide, or loose mounting fixtures failing to securely support shelf weight.
Symptoms of a bad drawer glide include:
- Difficulty accessing or storing items within drawers
- Squeaking or grinding noises when opening/closing
- Drawers failing to fully extend or retract
- Risk of entire drawer assembly detaching over time
This OEM GE part is also compatible with some Hotpoint, RCA and select Kenmore electric and gas range models.
Do-It-Yourself Stories from Customers like You
Broken glider. Dorothy S. • Kalamazoo , MI • January 13, 2023
Replaced glider.
Read more
More
$18.30
- Compare At:
-
$21.96
- You Save:
-
$3.66
Genuine Ge part
By: Ge
Part Number: WB07K10232
The Bottom Door Trim (BLK) is an OEM part for GE ranges. This black trim piece is located at the bottom of the oven door, providing a finished look while also protecting the door's edge from damage and wear.
Causes of a bad bottom door trim can include repeated exposure to high temperatures, accidental impacts, or regular wear and tear from frequent use.
Symptoms of a bad bottom door trim include:
- Visible cracks or breaks in the trim
- The trim becoming loose or detaching from the door
- Sharp edges or warping
- Difficulty in opening or closing the oven door properly
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The front door glass of my ge xl44 gas range was shattered by a flying crockpot Kurt N. • South Williamsport , PA • May 10, 2017
I lifted up the door and removed it.
Next, I laid out newspaper on the floor.
I placed the door on the newspaper upside down.
With my socket driver, I removed the bottom door trim.
I then used a pocket knife to remove the remaining glass in the top groove.
I then slid in the new glass and reinstalled the trim.
It took 30 minutes to replace the glass and clean up the glass
fragments from the previous door glass.
I looked up a video on how to replace it Utube.
Personal safety equipment - Safety...
Read more
More
$25.64
- Compare At:
-
$30.77
- You Save:
-
$5.13
Genuine Ge part
By: Ge
Part Number: WB18K10036
This line cord supplies electrical power from the wall outlet to the appliance. Replacing a worn, cut, or heat-damaged cord restores safe, reliable power and can help resolve no-power or intermittent operation issues.
- Delivers AC power from the outlet to the unit's electrical system
- Helps correct no-power or intermittent power when the cord is moved
- Ideal replacement for cords with cuts, fraying, or burn/discoloration on the plug
- Supports proper grounding and safe operation when installed correctly
What's included: 1 line cord assembly Install notes:
- Disconnect power before servicing; ensure the appliance is fully de-energized
- Match wire routing and connections to the product's wiring diagram; ensure a secure ground
- Use an appropriate strain relief if required by the product to prevent abrasion
- Route the cord away from sharp edges, moving parts, and hot surfaces
Do-It-Yourself Stories from Customers like You
Worn out power cord Carmen C. • Corona , CA • September 02, 2016
I purchased a new power cord and installed it myself.
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Ge part
By: Ge
Part Number: WB21K12
Restore smooth, controllable flame on a gas cooktop burner. This surface burner valve regulates gas flow to an individual top burner, allowing precise adjustment from low simmer to full boil and helping stop leaks when turned off.
- Controls gas flow to one surface burner
- Common failure signs: burner won't light or is very weak, knob turns hard or feels loose, gas odor at the valve, flame will not adjust smoothly
- Helps ensure reliable ignition and steady flame once replaced
What's included: One burner valve only Install notes:
- Disconnect gas and power before servicing; ventilate the area if gas odor is present
- Label and transfer the knob shaft orientation and any mounting hardware from the original
- Check and reuse the correct orifice and inlet fittings from the old valve if required by your model
- After installation, perform a leak check on all connections with approved leak-detection solution
Do-It-Yourself Stories from Customers like You
Broken gas valve on gexl44 Diana F. • Fairfield , IA • July 18, 2014
Shut off gas. Order part from your helpful (on Sunday afternoon) telephone person. Get part in two days. Replace part.
Read more
More
$85.95
- Compare At:
-
$103.14
- You Save:
-
$17.19
Genuine Ge part
By: Ge
Part Number: WB1X119D