Kenmore Range 628.9696840 (6289696840, 628 9696840) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316442301
The Coil Surface Element is an OEM part for Frigidaire ranges and cooktops. It is a key component for cooking, providing the heat source directly under pots and pans. This 8 inch element is designed to heat quickly and maintain consistent temperature, which is essential for effective cooking and energy efficiency.
Symptoms of a bad Coil Surface Element include:
- The element not heating up when turned on
- Uneven heating or hot spots that can cause inconsistent cooking results
- The element not turning off or fluctuating in temperature
Causes of a bad coil surface element can include a breakdown of the coil itself due to general wear and tear, electrical connections becoming loose or corroded, or damage from spills or impacts during cooking.
This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My frigidaire surface element was burnt out Dong N. • Monterey , CA • November 09, 2014
I went to a local stove parts store to find a replacement. The store ordered the element for me and promised that it would arrive the next day. I waited for seven 'working' days,but the part never came. So I went online, and found the part in AppliancePartsPros.com. I ordered it in the evening of November 5, 2014, and the part was delivered the next day, November 6 at 11.08AM!
Fantastic! I don't know how they could deliver that fast. But clearly, nobody could beat that service.
The part fits...
Read more
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308000010
Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.
Do-It-Yourself Stories from Customers like You
1: loud noise on freezer side. 2: no water dispensing Matt M. • Pickett , WI • February 05, 2021
1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was.
2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived...
Read more
More
$51.62
- Compare At:
-
$61.43
- You Save:
-
$9.81
Genuine Frigidaire part
By: Frigidaire
Part Number: 131658800
Dryer won't start or stops mid-cycle? A broken door catch prevents secure closure, triggering safety shutoffs. Simple snap-in replacement, 1 minute.
This part fixes the following symptoms
-
Door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$54.25
- Compare At:
-
$65.10
- You Save:
-
$10.85
Genuine Frigidaire part
By: Frigidaire
Part Number: 318372211
If your burner isn't heating evenly or won't heat at all, this 6-inch coil element typically solves the problem. Simple plug-in replacement. Video guide.
Do-It-Yourself Stories from Customers like You
Needed new burners and drip pans John V. • Houston , TX • February 22, 2016
Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed.
Read more
More
$28.42
- Compare At:
-
$33.82
- You Save:
-
$5.40
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$17.08
- Compare At:
-
$18.82
- You Save:
-
$1.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102
Dryer door won't stay closed? The door strike secures the door latch during operation. Quick DIY fix—installs from the front in minutes.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer door would not stay closed Carolina L. • Miami , FL • September 08, 2015
My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch.
I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to...
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308003347
Oven won't heat or takes too long to preheat? A failed bake element is the likely cause. This bottom heating element is a straightforward 15-minute DIY fix.
Do-It-Yourself Stories from Customers like You
The heating element of my 25 yr old electric wall oven died Patricia M. • Liverpool , NY • January 06, 2016
Ordered the replacement part the recommended by your parts department. I then watched a video so I knew what was in Store. The part arrived in less than 2 days & 15 minutes later I was baking brownies!!!!! Voila!!! Done deal!!! Now I am going to order a second one to replace the lower oven's element since it's been 'off' for over a year. The local appliance repair had informed us that it would charge $125 for the initial 30 minute service call to come in to inspect the appliance,...
Read more
More
$105.95
- Compare At:
-
$127.14
- You Save:
-
$21.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304442087
Two-piece broiler pan set for your range or wall oven. Includes vented insert and drip tray. Replace cracked, warped, or missing broiler pans.
More
$54.25
- Compare At:
-
$64.02
- You Save:
-
$9.77
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308014215
$1.84
- Compare At:
-
$1.90
- You Save:
-
$0.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 5301304907
This clock knob replaces a worn or broken timer/clock control knob so you can easily set or adjust the oven/range clock and timer. It restores a secure grip and clear control over clock/timer settings. What it does
- Fits onto the clock/timer control shaft to allow manual setting and adjustment.
- Provides a firm grip for turning the timer or setting the oven clock.
- Helps restore proper user control when the original knob is cracked, loose, or missing.
- Compatible with the OEM control interface — replaces the original-style clock/timer knob.
What's included One clock knob. Install notes
- Disconnect power to the appliance before servicing to prevent electrical shock.
- Typically installs by aligning the splines and pushing the knob straight onto the control shaft; avoid forcing at an angle.
- If the original knob is stuck, use a gentle, even pulling motion or a non-marring puller tool; protect surrounding surfaces.
More
$41.58
- Compare At:
-
$49.48
- You Save:
-
$7.90
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308012004
$6.95
- Compare At:
-
$8.34
- You Save:
-
$1.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 3051785
$8.95
- Compare At:
-
$9.09
- You Save:
-
$0.14
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5301167506
Replace your range oven door hinge if cracked, broken, or worn. This hinge mounts to the oven frame to support and pivot the door for smooth opening and closing.
More
$85.21
- Compare At:
-
$100.55
- You Save:
-
$15.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303051567
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 08001617
$5.42
- Compare At:
-
$5.96
- You Save:
-
$0.54
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 08003187
This is a replacement mounting screw used to secure appliance panels and components so parts stay in place and operate quietly. Fits specific Frigidaire appliance locations where the original screw has stripped, rusted, or gone missing. What it does:
- Fastens panels, trim, brackets, or small components to the appliance frame
- Restores secure attachment to stop rattling or loose parts
- Replaces lost or damaged screws that prevent proper assembly
- Helps maintain safe, stable operation of the affected component
What's included: One replacement screw Install notes:
- Disconnect power (unplug appliance or shut off breaker) before beginning any repair
- Use the properly sized screwdriver or driver bit to avoid stripping the head
- Do not overtighten; snug until secure to prevent damage to mating parts
- Keep small parts away from children and magnetic pickup tools can help retrieve dropped screws
More
$1.95
- Compare At:
-
$2.09
- You Save:
-
$0.14
Out Of Stock
Usually ships within 4 - 14 days