Kenmore Dishwasher 665.13282K110 (66513282K110, 665 13282K110) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10282479
The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.
Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.
As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces
Do-It-Yourself Stories from Customers like You
Color change went from black to stainless steel Wayne J. • Harleysville , PA • January 12, 2019
Very smooth. I ordered the door and the control panel. It is helpful to have an extra set of hands when removing the screws from the door or place something under it so it doesn’t drop. The door comes off with about 10 screws. They are different length. Short screws go into steel, long go into plastic. Remove the door and upper facia/control panel. You’ll need to disconnect the wires. The panel has two parts that need to be transferred. 1. The electronic panel. It’s white and has a row of...
Read more
More
$19.50
- Compare At:
-
$23.01
- You Save:
-
$3.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W10195416V
The Lower Dishrack Wheel Assembly is an OEM replacement part for Whirlpool dishwashers, designed to ensure the smooth and easy movement of the lower dishrack in and out of the dishwasher. This assembly includes the wheel and the mount that attaches to the dishrack, allowing effortless gliding even when the rack is fully loaded with dishes.
Note: Lower dishrack roller assembly, gray, (4) required to replace them all. Sold individually.
Symptoms of a failing Lower Dishrack Wheel Assembly include:
- The dishrack sticking or struggling to slide in and out
- A wheel breaking off or becoming damaged, leading to uneven movement
- Noise during dishrack movement, indicating wear or damage to the wheels
Causes of a bad Lower Dishrack Wheel Assembly can range from normal wear and tear, which can lead to the degradation of the wheel material or the loosening of the mount, to overloading the dishrack, which puts excess pressure on the wheels and their attachments.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Wheels were broken on kitchenaide Jason D. • Frisco , TX • May 11, 2017
I ordered 4 of this part from AppliancePartsPros.com and watched the repair video of the product. This was a simple repair that took 10 minutes to replace all 4 wheel units on the bottom rack. Product is exact match to the part I replaced.
Read more
More
$33.28
- Compare At:
-
$39.60
- You Save:
-
$6.32
Genuine Whirlpool part
By: Whirlpool
Part Number: W10518394
The Dishwasher Heating Element is an OEM replacement part for Whirlpool dishwashers. It is a vital heating component that raises water temperatures sufficiently for sanitizing dishes during hot rinse cycles. Proper heat is essential to drying fully.
Causes of a bad heating element can include scaling or mineral deposition over time that insulates it from conducting heat. Physical damage like burnouts or breaks in coils/wires are also possible.
Symptoms of a faulty element are:
- Dishes failing to get fully dry at the end of cycles
- Low wash water temperatures
- Buzzing, clicking or strange noises from under the dishwasher
This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, and other Whirlpool-manufactured dishwashers.
This part fixes the following symptoms
-
Not drying dishes properly
-
Not cleaning dishes properly
See more...
Do-It-Yourself Stories from Customers like You
Whirlpool dishwasher not fully cleaning or drying dishes. Andrew M. • Seattle , WA • January 05, 2020
My Whirlpool dishwasher (wdf520padm3) started leaving food on dishes and not drying dishes as well as it used to, even when I ran the 'high temp' and 'heavy' cleaning options. This started happening after about 3 years of operation. To try to diagnose the issue, I started the diagnostics cycle (see below for instructions on how to do this). However, the 'Clean' LED is also not working on my dishwasher, so I was unable to read the error code after the service cycle finished.
I decided to...
Read more
More
$43.95
- Compare At:
-
$52.74
- You Save:
-
$8.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10712394
This adjuster kit is an OEM replacement part for Whirlpool dishwashers. Constructed of durable gray plastic and metal, this kit measures approximately 12 inches wide and 6.5 inches tall.
Symptoms of needing an Adjuster Kit include:
- Excessive vibrations or shaking during operation
- The appliance appearing unlevel or tilted
- Difficulty in opening or closing doors or drawers
- Increased noise levels or banging sounds
Causes of a bad or worn-out adjuster kit can include normal wear and tear over time, accidental impacts or mishandling, or improper installation or leveling during the initial setup.
This Kit Includes:
- (2) adjuster arms
- (2) adjuster actuators
- (2) gray adjuster covers
- (2) gray adjuster housings
- (4) screws
- Instruction sheet
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Top rack rollers snapped off plastic axles snapped Robin J. • Hudson , WI • July 15, 2014
I replaced the adjusters on both sides (since two rollers broke off on one and one broke off on the other). Replacement was easy, just remember to keep the clips from the original adjusters. Take the clips off, remove the adjuster, replace with the new adjuster, and replace the clips. The new adjuster comes with the rollers already attached so no need to keep the ones from when plastic axle broke on the original adjusters.
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10491331
The Arm-Spray is an OEM part for Whirlpool dishwashers. This component is responsible for distributing water throughout the dishwasher during the cleaning cycles. It rotates and sprays water to ensure that all dishes are thoroughly cleaned, reaching all corners of the dishwasher.
Causes of a bad arm-spray can include clogging from food particles or mineral deposits, damage from heavy items or utensils blocking its path, or wear and tear from regular use.
Symptoms of a bad arm-spray include:
- Poor cleaning performance with food residue left on dishes
- The spray arm not rotating properly
- Unusual noises during the wash cycle
- Water not reaching the upper racks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Our Kenmore dishwasher started leaking water onto the bottom access cover far left side. Willard D. • Montrose , CO • June 20, 2021
I took the bottom access cover off, and checked underneath the unit to isolate where it was leaking from. Cleaned the cover, and the spot where the leak happened was marked for me. The front, far left hand side, behind the door. Ran a quick rinse cycle with a pan under the spot to verify it was there. It was. Then I did an internet search and found your website. Our dishwasher, bought in November of 2016, was listed, and several of the reviewers said wonderful things about their experiences...
Read more
More
$41.95
- Compare At:
-
$50.34
- You Save:
-
$8.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10348269
The Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing wastewater from the dishwasher tub during the drain cycle, ensuring that the dishwasher operates efficiently and effectively.
Causes of a bad drain pump can include clogging from food particles and debris, damage to the pump impeller, or electrical failures within the pump motor. Over time, regular use can lead to wear and tear that affects the pump's performance.
Symptoms of a bad drain pump include:
- Water not draining from the dishwasher
- Standing water at the bottom of the dishwasher after a cycle
- Unusual noises during the drain cycle
- Error codes related to drainage issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher stopped draining water the pump was running (i could hear the noise) but water would not go away Evgueni P. • San Mateo , CA • February 08, 2015
I've opened sump housing to check for clogging but it was clean. When I removed check valve to inspect it I've found out that the round part of the valve was missing so I figured it might've blocked the water exit at drain hose or something like that. So I pulled the dishwasher out to get a full access to drain hose connector and the pump. Upon disconnecting the drain and checking its connector I indeed found the round piece totally blocking the hose and acting as a seal. I removed the piece...
Read more
More
$59.79
- Compare At:
-
$71.02
- You Save:
-
$11.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195622
The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool dishwashers. This single clip works to secure the lower dishrack in its correct position during the wash cycle.
Symptoms of a bad dishrack stop clip can include:
- The lower dishrack rattling or moving excessively during spinning
- Dishes and utensils falling to the bottom of the tub and not getting clean
- Visible wear on the clip material
Causes can be normal wear from securing the dishrack cycle after cycle. Improper loading may also damage the clip over time.
This OEM Whirlpool part replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.
Do-It-Yourself Stories from Customers like You
Top rack of dishwasher was falling down when pulled out Joanne P. • Andover , MA • October 13, 2014
Replaced wheel assembly because prongs were broken and replaced track because wheel assemblies were rolling out from the track when extended.
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: W10542314
The Gasket and Strike Kit is an OEM part for Whirlpool dishwashers, designed to ensure a tight and leak-proof seal around the dishwasher door. This kit includes a door gasket and a door strike, both crucial components in preventing water from leaking out during the wash cycle.
Causes of a bad Gasket and Strike Kit can include normal wear and tear from regular use, leading to a loss of elasticity in the gasket.
Symptoms of a bad Gasket and Strike Kit include:
- Water leaking from around the dishwasher door.
- Difficulty closing the dishwasher door or ensuring it stays latched during operation.
- Visible signs of wear, such as cracks or hardening on the gasket, or bending or damage to the strike.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Leaking door gasket Scott N. • Myrtle Beach , SC • July 04, 2014
I followed your step by step instructional online video. That is one great tool you are providing for your customers!
Read more
More
$56.95
- Compare At:
-
$68.34
- You Save:
-
$11.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10327249
The Water Inlet Valve is an OEM replacement part for Whirlpool dishwashers. The water inlet valve is responsible for regulating the flow of water into the dishwasher. It is connected to the main water supply and opens and closes as needed to allow water to enter the appliance at the appropriate time and in the correct quantity.
Causes of a bad Water Inlet Valve can include mineral deposits that clog the valve, a failure in the valve's solenoid, or wear and tear over time that affects the valve's ability to open and close properly.
Symptoms of a bad Water Inlet Valve include:
- Dishwasher not filling with water
- Water filling too slowly or too quickly
- Water leaking from the dishwasher
- Unusual noises during the fill cycle
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Note: The white plug connector can be disconnected to allow for connection of the dishwasher wiring if needed.
Do-It-Yourself Stories from Customers like You
No water in the dishwasher. Rohan P. • Troy , OH • January 30, 2022
As mentioned, our Whirlpool Dishwasher would complete the cycle but Tablet pretty much sat in the Soap Dispenser Box nor there was any sign of water inside the Dishwasher. This happened 2 - 3 times. Hence decided to dive into what the fix was.
After reviewing a bunch of Youtube Videos, understood first how a typical Dishwasher operates and what are the basic checks it does before water is let inside. So it typically first checks whether Door S/w got activated, followed by Float Switch...
Read more
More
$51.30
- Compare At:
-
$61.05
- You Save:
-
$9.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195840
The Dishwasher Adjuster Positioner is an OEM part for Whirlpool dishwashers. It plays a vital role in adjusting the height of the upper rack, allowing for flexible loading options and accommodating larger items when necessary.
Causes of a bad Dishwasher Adjuster Positioner can include mechanical wear and tear from regular use, stress fractures from bearing excessive weight, or damage during rack adjustment.
Symptoms of a bad Adjuster Positioner include:
- Difficulty in adjusting the height of the dishwasher rack,
- The rack becoming loose or failing to stay in the set position,
- Unusual sounds or resistance when moving the rack up or down.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Upper rack adjuster cracked Gary G. • San Francisco , CA • April 27, 2019
I bumped into my KitchenAid dishwasher and the upper rack adjuster cracked. There was already a crack on the notch of the housing where the handle (lever) sits. In addition, the positioner popped out and I couldn't find it. So, I bought the three parts from AppliancePartsPros online.
It arrived in about a week. The repair was fairly simple, but it still took about 45 minutes because I didn't want to crack the assemblies.
For the housing, use a small slotted screwdriver to carefully...
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661566
Thermostat has 1/4 inch terminals.
The High Limit Thermostat is an OEM part for Whirlpool dishwashers. This safety feature is designed to prevent the dishwasher from overheating by shutting off the power if the internal temperature exceeds a certain limit. It acts as a safeguard against potential hazards, such as fires, and ensures the dishwasher operates within safe temperature ranges.
Over time, the high limit thermostat can become defective due to normal wear or electrical issues within the dishwasher. A malfunctioning thermostat may not accurately respond to temperature changes, which can lead to overheating or the dishwasher not reaching the necessary temperature for optimal cleaning.
Symptoms of a bad High Limit Thermostat include:
- Dishwasher not starting or completing a cycle
- The dishwasher stops heating water, affecting cleaning performance
- Overheating, which could potentially damage dishes or the dishwasher itself
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Not drying dishes properly
See more...
Do-It-Yourself Stories from Customers like You
Whirlpool dishwasher not fully cleaning or drying dishes. Andrew M. • Seattle , WA • January 05, 2020
My Whirlpool dishwasher (wdf520padm3) started leaving food on dishes and not drying dishes as well as it used to, even when I ran the 'high temp' and 'heavy' cleaning options. This started happening after about 3 years of operation. To try to diagnose the issue, I started the diagnostics cycle (see below for instructions on how to do this). However, the 'Clean' LED is also not working on my dishwasher, so I was unable to read the error code after the service cycle finished.
I decided to...
Read more
More
$27.95
- Compare At:
-
$32.98
- You Save:
-
$5.03
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10538166
The Motor to Sump Seal is an OEM part for Whirlpool dishwashers. It creates a watertight seal between the motor and the sump, preventing leaks and ensuring efficient operation of the dishwasher. This seal plays a critical role in maintaining the integrity of the dishwasher's internal components.
Causes of a bad motor to sump seal can include wear and tear from regular use, damage due to improper installation or maintenance, and deterioration from exposure to heat and detergents over time. A compromised seal can lead to leaks and reduced efficiency.
Symptoms of a bad motor to sump seal include:
- Water leaking from the bottom of the dishwasher
- Puddles of water underneath the appliance
- Unusual noises or reduced performance of the dishwasher
- Visible cracks or wear on the seal
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Leak from under KitchenAid dishwasher misdiagnosed by technician David B. • Freeport , NY • August 21, 2020
My dishwasher was leaking and I called to have a certified technician come to diagnose the problem. I removed the kick panel from the bottom of the machine. He turned it on and we saw that water was leaking from the bottom. He said I needed a Sump kit but it wasn't in stock. The cost was $170 plus tax and labor cost was another $140. So I talked it over with dad and ordered the Sump kit, the hose clamp and a new diverter motor as mine was yellowed with age. The cost of all these parts and...
Read more
More
$28.28
- Compare At:
-
$33.37
- You Save:
-
$5.09
Genuine Whirlpool part
By: Whirlpool
Part Number: W10537869
The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures that dishes are thoroughly cleaned and rinsed by optimizing coverage and water intensity according to the cycle selected.
Causes of a bad Diverter Motor can include electrical failures, mechanical wear over time, or damage from water infiltration.
Symptoms of a bad Diverter Motor include:
- Dishes not being cleaned properly due to insufficient water reaching all areas.
- Unusual noises coming from the dishwasher, which may indicate a struggling or stuck diverter motor.
- Error codes displayed on the dishwasher that are related to water distribution functions.
- Leakage from the dishwasher base
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Seal leaking around diverter motor Mark M. • Moberly , MO • January 17, 2016
ORDERED NEW SUMP AND DIVERTER MOTOR, THE SHAFT ON THE DIVERTER MOTOR FELT A LITTLE ROUGH SO I WENT AHEAD AND REPLACED IT, THE SUMP REPLACEMENT WENT FAIRLY EASY. HAD TO MAKE A TRIP TO THE HARDWARE STORE FOR A HOSE CLAMP. ONE HOSE ON THE SUMP HAS A CLAMP THAT IS NOT REUSEABLE. YOU SHOULD ALSO ORDER THIS CLAMP. IT IS NARROW AND A REGULAR HOSE CLAMP WILL NOT WORK.
Read more
More
$68.95
- Compare At:
-
$86.09
- You Save:
-
$17.14
Genuine Whirlpool part
By: Whirlpool
Part Number: W10728159
The Lower Dishrack is an OEM replacement part for Whirlpool dishwashers. It is a crucial component that holds and organizes dishes, pots, and pans during the dishwashing cycle, ensuring proper cleaning and preventing damage.
Symptoms of a need to replace the lower dishrack:
- Cracks, breaks, or damage to the dishrack structure
- Missing or detached components, such as tines or handles
- Rust or corrosion on metal parts, affecting functionality and appearance
Causes of a faulty lower dishrack can include general wear and tear, exposure to high temperatures or harsh detergents, and accidental impact or mishandling.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
The bottom dishwasher rack was rusting and needed to be replaced Denise D. • Frederick , MD • January 28, 2017
I ordered a replacement part from AppliancePartsPros.com, however the exact part for my Kitchen Aid dishwasher had been discontinued. There were two differences between the original and replacement part.
First, the original rack had two adjustable tine rows, but the replacement only had one. I was only able to attache one of them to the new rack. This didn't present any issue other than having less flexibility in customizing the configuration for loading large items on the rack.
The second...
Read more
More
$155.95
- Compare At:
-
$185.58
- You Save:
-
$29.63
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10498900
The Arm Spray is an OEM part for Whirlpool dishwashers. This component is crucial in the dishwasher's ability to effectively clean dishes, as it distributes water evenly throughout the unit during a wash cycle. Located beneath the upper rack, the arm spray rotates and sprays water at a controlled pressure and angle, ensuring that all dishes, regardless of their placement, are thoroughly washed.
Causes of a bad arm spray include clogging from food particles or mineral deposits from hard water, physical damage that can prevent it from spinning, and wear that reduces the effectiveness of the spray holes.
Symptoms of a bad arm spray include:
- Dishes remain dirty or spotty after washing
- Decreased water pressure in the spray
- Unusual noise during operation as the arm struggles to rotate
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Upper basket rails were falling apart Charles F. • Ashburn , VA • October 05, 2019
While this is a Whirlpool dishwasher, I have the Kenmore Elite version of it. I believe them to be identical for parts. A little background: The first symptom I had of problems was plastic bits from the ball bearing retainer strips in the slides falling out. Then ball bearings falling out. A common problem with this dishwasher. When disassembling the upper basket, some of the gray plastic pieces were very brittle and easily snapped off. So I ended up replacing all of the plastic pieces related...
Read more
More
$40.95
- Compare At:
-
$48.73
- You Save:
-
$7.78
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195623
The Upper Dishrack Track is an OEM part for Whirlpool dishwashers. This component is essential for the smooth and stable movement of the upper dishrack, allowing it to slide in and out.
Causes of a bad Upper Dishrack Track can include accumulation of debris that impedes the track's function, wear and tear from regular use, or damage from overloading the dishrack, which can lead to warping or cracking.
Symptoms of a bad Upper Dishrack Track include:
- Difficulty pulling out or pushing in the upper dishrack.
- The dishrack becoming stuck or derailing during movement.
- Unusual noises when moving the dishrack, such as grinding or clicking.
- Visible signs of wear or damage to the track.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Top rack of dishwasher was falling down when pulled out Joanne P. • Andover , MA • October 13, 2014
Replaced wheel assembly because prongs were broken and replaced track because wheel assemblies were rolling out from the track when extended.
Read more
More
$52.33
- Compare At:
-
$62.27
- You Save:
-
$9.94