Kenmore Range 790.46991102 (79046991102, 790 46991102) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217002
The Oven Temperature Probe is an OEM part for Frigidaire ovens. This part monitors the oven's internal temperature, ensuring that it accurately reflects the set temperature on the oven's control. By measuring the heat inside the oven, the temperature probe helps in maintaining consistent cooking results, preventing undercooking or overcooking of food.
Over time, the oven temperature probe can fail or become inaccurate due to wear and tear, exposure to extreme temperatures, or damage from cleaning and handling. This can lead to uneven cooking results, with food being overcooked or undercooked, despite setting the oven to the correct temperature.
Symptoms of a bad Oven Temperature Probe include:
- Oven not reaching the set temperature
- Oven temperature fluctuating more than usual
- Food not cooking evenly or within expected time frames
- Error codes displayed on the oven indicating a temperature sensor issue
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Error code F10 Dan H. • Culver City , CA • December 27, 2019
Bought a used Frigidaire 36 inch stove. The broiler didn't come on but the burners lit and the stove worked so I made do for about 4 or 5 years with that. Then the F10 code came up and it wouldn't stop beeping until I unplugged it. I figured the electronics/circuit board was probably bad and ordered a replacement. I was confused about what part to order. The parts list includes "Control Panel" and "Clock - Timer". Turns out the control panels are the glass panel on the front of the stove...
Read more
More
$53.42
- Compare At:
-
$63.57
- You Save:
-
$10.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255006
The Heating Element is an OEM part for Frigidaire ovens and ranges. It is responsible for providing the heat necessary for baking or broiling. The element converts electrical energy into heat through resistance; this heat is then distributed throughout the oven cavity to cook or bake food evenly.
Common causes of a bad Heating Element can include visible signs of damage like blistering, bulging, or breakage. A burnout may occur when the element overheats and fails, leading to no heat production. Additionally, electrical issues like a blown fuse or faulty wiring can prevent the element from receiving power.
Symptoms of a bad Heating Element include:
- The oven does not heat up
- Uneven cooking or baking
- Longer cooking times than usual
- The element not glowing when the oven is turned on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees Mark R. • Eastham , MA • May 15, 2015
One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it...
Read more
More
$146.95
- Compare At:
-
$176.34
- You Save:
-
$29.39
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$15.95
- Compare At:
-
$18.82
- You Save:
-
$2.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255605
The Broil Element is an OEM part for Frigidaire ovens and ranges. It is specifically designed to provide the high heat necessary for broiling food, such as meats and vegetables. Located at the top of the oven interior, the broil element radiates heat downwards, creating a high-temperature environment ideal for browning and caramelizing the exterior of dishes while locking in juices.
Over time, the broil element can burn out or become damaged due to high temperatures and frequent use.
Symptoms of a bad Broil Element include:
- Lack of heat when broiling
- Uneven cooking or browning of food
- Visible damage or breaks in the element
- No visible glow from the element during operation
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$128.95
- Compare At:
-
$152.16
- You Save:
-
$23.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400
The Oven Light Socket is an OEM replacement part for Frigidaire electric ranges and wall ovens. It houses the bulb that illuminates the interior of the oven cavity.
Causes of a bad light socket can include a loose or broken connection due to regular use, scorched or burnt terminals from overheating, or damage from moisture.
Symptoms of a bad light socket include:
- The oven light not turning on when activated
- Flickering or intermittent bulb operation
- Signs of corrosion or oxidation around the bulb base
- Excessive heat emission from the light area
This OEM Frigidaire replacement part is also compatible with ranges and wall ovens from Electrolux, Gibson, and Kelvinator.
Do-It-Yourself Stories from Customers like You
Light socket inside oven broke Linda S. • Novato , CA • June 02, 2015
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm!
Read more
More
$51.23
- Compare At:
-
$61.48
- You Save:
-
$10.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293827
The Range Switch is an OEM part for Frigidaire ranges. This switch controls the power supply to the range elements, allowing you to adjust the heat levels for cooking.
Causes of a bad Range Switch can include wear and tear from regular use, electrical issues such as short circuits or faulty wiring, or damage due to spills or overheating. These issues can result in the switch failing to regulate the power to the elements properly.
Symptoms of a bad Range Switch include:
- Inability to adjust the heat level
- The element not turning on or off
- Intermittent or inconsistent heating
- A burnt smell or visible damage on the switch
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Large burners would go to high when turned on Charles H. • Prestonsburg , KY • October 25, 2016
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days...
Read more
More
$69.95
- Compare At:
-
$83.94
- You Save:
-
$13.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527842
The Switch Rocker is an OEM part for Frigidaire ranges. This switch is used to control various functions of the range, such as turning on heating elements or activating specific cooking modes. It provides a reliable and straightforward interface for managing the range's features.
You should replace the range switch rocker if it becomes faulty. Causes of a bad switch rocker can include wear and tear from frequent use, exposure to high temperatures, electrical malfunctions, or physical damage from impacts or mishandling. A defective switch rocker can result in unresponsive controls, making it challenging to operate the range effectively.
Symptoms of a bad Range Switch Rocker include:
- The switch not responding when pressed
- Inconsistent or flickering performance of the heating elements
- Physical damage or looseness in the switch
- Intermittent operation or complete failure to activate the desired function
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The rocker switch for to adjust the size of the heating element for the stove broke as well as the rocker switch to adjust the oven light broke Benjamin G. • West Sacramento , CA • January 07, 2017
I purchased 2 new light rocker switches, Because the heating element rocker switch was unavailable. First I removed the power source for safety. Then I simply pulled each switch out individually with a flathead screwdriver for leverage. I simply unplugged the wires from the old rocker switch, discarded the old rocker, plugged the wires into the new rocker switch, and pushed the new switch appropriately back into the control panel. I used the same steps for both rocker switches. Once...
Read more
More
$15.50
- Compare At:
-
$18.60
- You Save:
-
$3.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 318394803
Has three terminals.
Do-It-Yourself Stories from Customers like You
Oven light stayed on when door was closed Robert S. • Jacksonville , IL • June 14, 2015
When trouble shooting the problem I found that the light switch housing outer lip was broken allowing the switch to push through mounting surface behind the oven door. This is a slide in range so, I proceeded to pull the range away from the counter where I could unplug the power cord. Once the power was off like located the panel on the right upper side of the unit and removed the screws to allow access to the switch. I then unplugged the switch from the wiring harness and removed the damaged...
Read more
More
$49.95
- Compare At:
-
$59.94
- You Save:
-
$9.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 318053103
Length: Approx. 82 1/2"
Do-It-Yourself Stories from Customers like You
18 year old oven; works great but racks ugly/discolored and impossible to clean well enough; door seal flattened and discolored Cathryn S. • Breckenridge , CO • September 01, 2018
Bought two new racks - beautiful! Bought replacement door seal: watched simple video and installed new seal in less than 10 minutes. Extremely pleased and impressed with entire experience as a first-time customer.
Read more
More
$97.65
- Compare At:
-
$116.20
- You Save:
-
$18.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 316270201
Color: White. For bisque order 316270202. This oven door handle no longer comes with an insert for the screw. Which means you will need to order the replacement screws part number 5304500008 to grip into the plastic of the new handle.
Do-It-Yourself Stories from Customers like You
The door handle screw holes were hollowed out (the handle is plastic) making the door continuously fall off the plastic latches on the door trim were also broken off. Matthew F. • Columbia , MO • January 17, 2020
Replacing the trim takes a little bit of alignment and light force. The trim slides over the glass panel of the door, with the glass sliding into plastic tabs. We kept the door nearly vertical (almost closed), lined up the tabs on the trim with the glass door, and used mild force to slide the trim down onto the glass door. (Also, we found that the tabs on trim we ordered were much bigger than the tabs on our broken trim. This is probably due to slight variations in Frigidaire's design over...
Read more
More
$221.71
- Compare At:
-
$263.83
- You Save:
-
$42.12
Genuine Frigidaire part
By: Frigidaire
Part Number: 318175510
This machine screw adjusts and secures the leveling leg or bracket, helping you set the appliance stable and plumb. Replacing a stripped, bent, or missing screw restores a solid footing and makes accurate leveling possible.
- Threads into the base or leveling bracket to raise or lower the appliance for proper leveling
- Helps reduce rocking, wobbling, and vibration from an unlevel installation
- Common signs of wear: stripped threads, bent hardware, corrosion, or a missing screw
- Useful during installation or when the existing adjustment screw no longer holds
What's included: 1 screw Install notes:
- Disconnect power; shut off gas before working
- Support the appliance to relieve weight on the leveling point
- Remove the damaged screw; inspect and clean mating threads
- Start the new screw by hand to avoid cross-threading, then adjust height and snug
Do-It-Yourself Stories from Customers like You
Dryer drum was banging on every rotation Michael S. • Tequesta , FL • July 01, 2016
Replaced the rear rollers. Video of job on your website made it easy.
Read more
More
$31.95
- Compare At:
-
$38.34
- You Save:
-
$6.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293820
This surface element switch is the control behind your cooktop knob. It regulates power to the surface heating element so you can set and maintain the desired heat for reliable, consistent cooking performance.
- Regulates and cycles power to the surface heating element based on the knob setting
- Restores accurate low-to-high temperature control at the burner
- Typical failure symptoms: burner won't heat, only heats on high, or won't turn off
- Helps correct intermittent or uneven surface element heating
What's included: 1 surface element control switch Installation notes:
- Disconnect power at the circuit breaker before servicing
- Remove the knob and access the switch from the control panel or rear cover as applicable
- Photograph or label wire positions; transfer wires to the new switch one at a time
- Secure the switch, reassemble, restore power, and test all heat settings
Do-It-Yourself Stories from Customers like You
Large burners would go to high when turned on Charles H. • Prestonsburg , KY • October 25, 2016
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days...
Read more
More
$61.79
- Compare At:
-
$74.15
- You Save:
-
$12.36
Genuine Frigidaire part
By: Frigidaire
Part Number: 318095957
Replacement motor that restores mechanical drive or airflow in select Frigidaire appliances. Installs in place of the original motor to help return normal rotation, tumbling or fan operation. What it does:
- Drives rotating components (drum, tumbler, agitator or fan) depending on application.
- Helps restore normal spin, tumble or airflow when the original motor fails.
- Common symptoms: appliance won't start or spin, weak/uneven rotation, loud humming/grinding, or reduced airflow.
- Direct-fit replacement designed to match original mounting and electrical connections for specified models.
What's included: One motor. Install notes:
- Disconnect power (and water if applicable) before beginning any work.
- Avoid pulling on wires; reconnect all harnesses and secure mounting fasteners per OEM instructions.
This part fixes the following symptoms
-
Door won't open after self cleaning cycle
See more...
Do-It-Yourself Stories from Customers like You
F9 door fault Alan D. • Hamilton , NJ • November 27, 2015
Replace door lock motor and switch assy
Read more
More
$99.33
- Compare At:
-
$119.20
- You Save:
-
$19.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 318198817
6 inch, 1200 watt single radiant surface element.
Do-It-Yourself Stories from Customers like You
Range burner element burned out Bruce C. • Grafton , VA • October 24, 2018
Ordered new replacement burner and replaced old one. YouTube videos were a big help as was two chats with Appliancepartspros rep.
Read more
More
$128.95
- Compare At:
-
$172.96
- You Save:
-
$44.01
Genuine Frigidaire part
By: Frigidaire
Part Number: 903118-9010
Size: 8 inch. 2200 watt. Radiant.
Do-It-Yourself Stories from Customers like You
Burner on glass top stove went out Rhonda F. • Huntingotn , WV • December 02, 2014
After watching the videos and reading the instructions on your website and the instructions which came with the new part, installation was easy. There was some simple rewiring involved with the included parts, but was simple. The replacement part actually arrived the day after it was ordered and I only paid for the standard shipping. Very fast.
Read more
More
$154.66
- Compare At:
-
$184.05
- You Save:
-
$29.39