Kenmore Range 790.94212403 (79094212403, 790 94212403) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935058
This OEM replacement Universal Element Receptacle kit is designed to fit most popular range brands such as Maytag, Magic Chef, Jenn Air, Whirlpool, Roper, Kenmore, Frigidaire, Admiral, Crosley, Estate, and Amana. This kit comes complete with everything you need for a hassle-free installation.
Included in the Kit:
- Two different mounting brackets
- A plastic terminal block
- Wires
- Hi-temp wire connectors
- heat insulators
In case your oven or range is displaying any of the following signs: non-heating burners, malfunctioning heating elements, burning odor, or a buzzing sound, this kit could be the answer to the problem. To replace the kit, you would require specific tools such as wire strippers, a heat gun or hair dryer, and a #1 square-head screwdriver.
This part fixes the following symptoms
-
Element will not heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
The large front burner on my range was not working Sandra T. • Spanaway , WA • June 17, 2014
The receptacle that held the burner element in place was broken so the burner would not make a connection and heat up. I ordered the receptacle kit. There was even an online video that showed how to make the repair. It just took a screwdriver and wire cutters and about 15 minutes and the job was done. The burner works great.
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 316442301
The Coil Surface Element is an OEM part for Frigidaire ranges and cooktops. It is a key component for cooking, providing the heat source directly under pots and pans. This 8 inch element is designed to heat quickly and maintain consistent temperature, which is essential for effective cooking and energy efficiency.
Symptoms of a bad Coil Surface Element include:
- The element not heating up when turned on
- Uneven heating or hot spots that can cause inconsistent cooking results
- The element not turning off or fluctuating in temperature
Causes of a bad coil surface element can include a breakdown of the coil itself due to general wear and tear, electrical connections becoming loose or corroded, or damage from spills or impacts during cooking.
This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My frigidaire surface element was burnt out Dong N. • Monterey , CA • November 09, 2014
I went to a local stove parts store to find a replacement. The store ordered the element for me and promised that it would arrive the next day. I waited for seven 'working' days,but the part never came. So I went online, and found the part in AppliancePartsPros.com. I ordered it in the evening of November 5, 2014, and the part was delivered the next day, November 6 at 11.08AM!
Fantastic! I don't know how they could deliver that fast. But clearly, nobody could beat that service.
The part fits...
Read more
More
$39.18
- Compare At:
-
$43.10
- You Save:
-
$3.92
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436000
The Small Surface Element Switch is an OEM replacement part for Frigidaire electric ranges. It serves as the control knob and circuitry to safely power one of the smaller cooking elements.
Symptoms of a bad surface element switch include:
- Inability to ignite or regulate heating for its assigned zone
- Switch knob that feels loose, won't click smoothly, or won't stay set
- Intermittent or unreliable power to the smaller element coils
- Tripped circuit breakers upon use that don't reset
Causes relate to thousands of rotations wearing micro-switches and wiring terminals within the control assembly. Regular cleaning around knobs can prevent accelerated deterioration from baked-on debris conducting excess heat.
This genuine OEM replacement part is compatible with other brands including Electrolux and Kenmore as well.
Do-It-Yourself Stories from Customers like You
Surface switches not operating properly; going from cool to very hot etc Guy G. • Guthrie , OK • October 10, 2014
Replaced all four element switches. Switches arrived within two days of ordering. That's about normal for AppliancePartsPros. They were the correct ones; not generic, and fit the original control knobs perfectly. This kind of service is what I'm used to from ApplicanePartsPros.
Read more
More
$62.64
- Compare At:
-
$73.92
- You Save:
-
$11.28
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304503232
The Inner Door Glass is an OEM replacement part for Frigidaire ranges. It is responsible for providing a safe viewing window into the oven cavity while protecting interior components from external damage.
Causes of a bad inner door glass include normal wear and tear such as chips or cracks developing from years of use. Accidental impact or thermal shocks from sudden temperature changes can also compromise the integrity of the glass.
Symptoms of a bad inner door glass:
- Cracks or breaks visible in the glass
- Difficulty seeing into the oven cavity clearly
- Increased risk of heat escaping when the oven is in use
- Potential safety hazards if glass cracks or shatters
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
Do-It-Yourself Stories from Customers like You
We shattered the interior window of our oven Jason C. • Seattle , WA • December 02, 2014
I ordered this glass and used a youtube video to replace the shattered glass step-by-step. I was a bit wary of doing this work myself, but it proved to be a snap. Within an hour of finding this package on my front porch, I had the oven as good as new.
Read more
More
$85.47
- Compare At:
-
$100.85
- You Save:
-
$15.38
Genuine Frigidaire part
By: Frigidaire
Part Number: 318372211
The Coil Burner Element is an OEM replacement part for Frigidaire cooktops and ranges. The 6-inch coil burner element typically consists of a spiral-shaped metal resistance wire or rod that glows red-hot when electricity passes through it. This heat is then transferred to the cooktop surface, allowing it to reach the desired temperature for various cooking tasks, such as boiling, simmering, or sautéing.
Symptoms of a bad coil burner element:
- Burner not heating up properly or failing to reach the desired temperature
- Uneven heating or hot spots on the cooktop surface
- Visible damage or breaks in the coil wire
- Unusual smells or burning odors emanating from the burner area
Causes of a bad coil burner element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore cooktops and ranges.
Do-It-Yourself Stories from Customers like You
Needed new burners and drip pans John V. • Houston , TX • February 22, 2016
Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed.
Read more
More
$40.44
- Compare At:
-
$48.12
- You Save:
-
$7.68
Genuine Frigidaire part
By: Frigidaire
Part Number: 316203301
The Broil Element is an OEM part for Frigidaire ovens. This element provides the intense heat necessary for broiling, ensuring that food is cooked evenly and thoroughly from above. It's essential for tasks such as broiling meats, melting cheese, and toasting bread. The element measures 15 3/8 inches from the front to the mounting bracket. It measures 12-1/4 inches wide, and 3 1/4 inches from the bracket to the terminal end. The mounting holes are 11-1/2 inches apart.
You should replace the broil element if it becomes faulty or damaged. Causes of a bad broil element can include regular wear and tear, overheating, or electrical issues that prevent it from heating up properly.
Symptoms of a bad broil element include:
- The broil element not heating up
- Uneven heating during the broiling process
- Visible damage or burn marks on the element
- Sparking or unusual noises when the broil function is used
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Top broiler element burnt out William H. • Cooper City , FL • June 10, 2016
Removed old element , found the part on exploded view diagram of th oven. Got on appliance parts pro web site put in model number , made sure picture on line looked the same and ordered. While I was at it ordered a bottom pan for the oven that needed replacing. Received both parts 3 or 4 days later regular shipping. Installed both parts no problem . Thanks appliance parts pros.
Read more
More
$135.42
- Compare At:
-
$162.50
- You Save:
-
$27.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 316490001
The Sensor Probe is an OEM part for Frigidaire ovens and ranges. This sensor is essential for monitoring the oven's internal temperature and communicating with the control board to maintain accurate cooking temperatures. It helps ensure that your oven heats to the desired setting and maintains consistent temperatures throughout the cooking process.
You should replace this sensor probe if it becomes faulty. Common issues that lead to a bad sensor probe include regular wear and tear, exposure to high temperatures over extended periods, or electrical failures within the sensor itself. Physical damage from accidental impacts during cleaning or maintenance can also compromise the sensor's functionality.
Symptoms of a bad sensor probe include:
- Inaccurate oven temperature readings
- Oven not reaching the set temperature
- Error codes related to temperature control
- Oven overheating or underheating
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Won't start
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Oven temperature was not consistant and varied at the same setting Robert T. • Palm Beach Gardens , FL • October 13, 2014
I replaced the probe which is a thermocouple. Naturally the connector was different from the one on the stove so I cut off the connector on the old probe and soldered it to the new probe. The cleaning of the wires and soldering them was the most time consuming activity of the repair.
My wife just tried the stove and the oven temperature read exactly as the setting.
Read more
More
$56.23
- Compare At:
-
$66.91
- You Save:
-
$10.68
Genuine Frigidaire part
By: Frigidaire
Part Number: 316400601
The Oven Bottom Panel is an OEM component for Frigidaire oven models. Located on the base of the oven interior, this metal panel provides structure and support.
Causes of a bad oven bottom panel include warping or damage due to exposure to high heat over time. Small nicks or cuts could allow heat to escape and reduce the oven's efficiency. Intentional or accidental impact during cleaning can also weaken the material.
Symptoms of a bad oven bottom panel include:
- Uneven or inefficient heat distribution within the oven
- Visible warping or damage to the panel surface
- Reduced heat retention leading to longer cook times
- Potential safety hazards if the metal is weakened
This OEM Frigidaire part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Aluminum foil melted to bottom panel of oven could not remove Dan C. • Royal Oak , MI • November 29, 2014
Replaced bottom panel
Read more
More
$81.95
- Compare At:
-
$96.70
- You Save:
-
$14.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935086
The Surface Unit Switch Kit is an OEM part for Frigidaire ranges. It controls the power and heat levels to the surface burners on the cooktop, allowing you to adjust the temperature for cooking. This kit typically includes the necessary components to replace a faulty switch and restore proper functionality to the burners.
Causes of a bad surface unit switch can include electrical malfunctions, wear and tear from regular use, or damage due to spills or impacts. A faulty switch can prevent the burner from heating correctly or at all.
Symptoms of a bad surface unit switch include:
- Burners not heating up or heating unevenly
- Inability to adjust the burner temperature
- Burners not turning on or off properly
- Sparks or electrical odors near the switch
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My kenmore electric range burners were constantly on high Eric M. • Long Beach , CA • January 23, 2017
When I called customer service your representative at Appliance Parts Pros was able to help me diagnose the problem and order the two parts that I needed. both parts arrived the next day and with helpful tutorial videos I was able to replace both the Surface Unit Switch and the Universal Element in less than 45 minutes.
Thanks so much for the great service and the money you saved me.
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Frigidaire part
By: Frigidaire
Part Number: A316222301
The 8-Inch Drip Pan is an OEM replacement part for Frigidaire ranges. It is positioned below cooktop burners to catch drips and spills on the cooking surface.
Causes of a faulty drip pan include scorching or discoloration from prolonged high heat exposure. Mineral buildup over time can inhibit drainage.
Symptoms consist of:
- Excess moisture near surface elements or controls
- Grease residues left on cooktop after cleaning
- Premature corrosion underneath the range top
- Electrical issues tripped by liquid contact
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My problem was I needed new drip pans from my electric range. Virginia M. • Wallkill , NY • September 07, 2020
I ordered 2 large ones and 2 small ones which arrived earlier than I was expecting.
Read more
More
$21.75
- Compare At:
-
$25.88
- You Save:
-
$4.13
Genuine Frigidaire part
By: Frigidaire
Part Number: 316022500
The Indicator Light is an OEM part for Frigidaire ranges. This light is designed to signal when the range or oven is in operation, providing a visual cue for safety and usability. It typically illuminates when the burners or oven are on, ensuring users are aware of active heating elements.
Causes of a bad indicator light can include electrical malfunctions, wear and tear over time, or damage from power surges or excessive heat.
Symptoms of a bad indicator light include:
- Light not illuminating when the range or oven is in use
- Flickering or inconsistent illumination
- Light staying on constantly, even when the range or oven is off
- Visible damage or discoloration of the light
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
A burner switch went bad in our electric stove and an indicator light burnt out Steve G. • Hanover , PA • January 05, 2015
The repair was a success. The switch and came looked different from the original. I called Appliance Parts Pro, they lady on the phone said that Frigidaire changed the switch and how to wire it up correctly. Problem solved. It all works as it should.
Read more
More
$53.95
- Compare At:
-
$63.66
- You Save:
-
$9.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 316413800
The Bake Element is an OEM replacement part for Frigidaire ovens and ranges. Located at the bottom of the oven cavity. This fundamental component produces the heat needed for baking, roasting, and heating functions.
Causes of bake element problems involve normal wear from repeated heat cycles and heavy-duty use over many years. Extended exposure to high oven temperatures can degrade fragile coil filaments.
Symptoms of a faulty bake element include:
- Uneven or inadequate heating for baking/roasting recipes
- Slow or inefficient preheating of oven interior
- Oven temperature failing to reach desired settings
- Element coil is visibly discolored or deteriorated
This OEM Frigidaire replacement element is also compatible with Electrolux, Gibson, and Kelvinator appliance brands.
Do-It-Yourself Stories from Customers like You
One day it didn't heat up for baking Matthew M. • Greensboro , NC • July 01, 2017
Watched the video here, took the leap that burner was the problem and ordered it. Also found another vid on you tube that was more specific to my Kenmore. Tip: find out how to take off the oven door. For mine it was very easy but not detailed in the APP vid.
I followed instructions in APP vid but also first took off back panel of range and tested resistance of old burner to ensure that was truly the problem (as suggested by other YT vid). Also, dis/connecting the wires from the back is easier...
Read more
More
$171.95
- Compare At:
-
$204.62
- You Save:
-
$32.67
Genuine Frigidaire part
By: Frigidaire
Part Number: A316222201
The 6-inch Drip Pan is an OEM part for Frigidaire ranges. This drip pan sits beneath the heating element on the stovetop, catching spills, drips, and food debris that occur during cooking.
Causes of a bad drip pan can include corrosion from prolonged exposure to moisture, heat damage from the heating elements, or physical damage from heavy cookware.
Symptoms of a bad drip pan include:
- Rust or corrosion on the pan's surface
- Warping or bending of the pan
- Difficulty in cleaning due to burnt-on residue
- Visible holes or damage that allows spills to reach the underlying surface
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My problem was I needed new drip pans from my electric range. Virginia M. • Wallkill , NY • September 07, 2020
I ordered 2 large ones and 2 small ones which arrived earlier than I was expecting.
Read more
More
$20.29
- Compare At:
-
$24.15
- You Save:
-
$3.86
Genuine Frigidaire part
By: Frigidaire
Part Number: 316419141
The Range Overlay is an OEM part compatible with Frigidaire ranges. The overlay covers the control board and labels the button on the board.
Causes of a bad overlay can be normal wear over time with heavy use of the range, exposure to heat and impacts, or warping from temperature fluctuations around the cooking elements.
Symptoms of a faulty overlay include:
- Cracks or breaks appearing in the material
- Loose, sagging, or misaligned fitment on the front of the range
- Gaps that compromise the seal around cooking surfaces
- Discoloration or other appearance issues affecting the look
It is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore range models.
Do-It-Yourself Stories from Customers like You
Oven made a loud pop sound and tripped the breaker the oven controls would not work however the stove top did removed the oven control board and saw that a circuit on the board had burned out Jason B. • Arab , AL • September 25, 2015
Purchased a new over control board and overlay. Installed in five minutes, and everything works great now. Shipping was super fast, and was here within two days.
Read more
More
$51.30
- Compare At:
-
$61.56
- You Save:
-
$10.26
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400
The Oven Light Socket is an OEM replacement part for Frigidaire electric ranges and wall ovens. It houses the bulb that illuminates the interior of the oven cavity.
Causes of a bad light socket can include a loose or broken connection due to regular use, scorched or burnt terminals from overheating, or damage from moisture.
Symptoms of a bad light socket include:
- The oven light not turning on when activated
- Flickering or intermittent bulb operation
- Signs of corrosion or oxidation around the bulb base
- Excessive heat emission from the light area
This OEM Frigidaire replacement part is also compatible with ranges and wall ovens from Electrolux, Gibson, and Kelvinator.
Do-It-Yourself Stories from Customers like You
Light socket inside oven broke Linda S. • Novato , CA • June 02, 2015
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm!
Read more
More
$51.23
- Compare At:
-
$61.48
- You Save:
-
$10.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316405000
The Oven Seal is an OEM replacement part for Frigidaire ovens. This seal is installed around the oven door to create a tight barrier, preventing heat from escaping during operation. By maintaining the internal temperature, the seal ensures efficient cooking and baking while reducing energy consumption.
Over time, the oven seal can wear out or become damaged due to exposure to high temperatures, frequent use, or accidental mishandling. A compromised seal can lead to heat loss, uneven cooking, or longer preheating times.
Symptoms of a bad oven seal include:
- Heat escaping from the oven door
- Longer cooking times or unevenly cooked food
- The oven taking longer to preheat
- Visible cracks, tears, or flattening of the seal
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Too much heat escaping the door Michael K. • Mechanicsville , VA • June 22, 2016
Removing was easy. Pull out the ends of the seal, the ends aren't locked in. Then, pull up on each retaining clip. Each clip is held in with spring tension.
Reinstallation was easy too. Start on one end, Twist frayed end into cone-like shape and insert into one of the holes for the seal. Push in with a skewer/screwdriver. Insert first clip into the first hole. Go around in a linear fashion, inserting each clip into each hole. After the last clip is pushed in, twist the end of the frayed end...
Read more
More
$100.42
- Compare At:
-
$132.23
- You Save:
-
$31.81