Kenmore Range 970.-445341 (970-445341, 970 -445341) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255006
If your oven won't heat or bakes unevenly, the bake element may be burned out. This is a simple 5-10 minute repair—just two screws and wire connectors.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees Mark R. • Eastham , MA • May 15, 2015
One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it...
Read more
More
$146.95
- Compare At:
-
$174.87
- You Save:
-
$27.92
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$25.95
- Compare At:
-
$30.62
- You Save:
-
$4.67
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$16.90
- Compare At:
-
$18.82
- You Save:
-
$1.92
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255605
Broiler not heating or turning red? This broil element restores high-heat broiling. DIY-friendly repair, typically takes 10-15 minutes with basic tools.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$129.95
- Compare At:
-
$154.64
- You Save:
-
$24.69
Genuine Frigidaire part
By: Frigidaire
Part Number: 316490001
Fix F10 error codes and inconsistent oven temperatures with this sensor probe. Monitors internal temp for accurate cooking. Moderate DIY repair.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Won't start
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Oven temperature was not consistant and varied at the same setting Robert T. • Palm Beach Gardens , FL • October 13, 2014
I replaced the probe which is a thermocouple. Naturally the connector was different from the one on the stove so I cut off the connector on the old probe and soldered it to the new probe. The cleaning of the wires and soldering them was the most time consuming activity of the repair.
My wife just tried the stove and the oven temperature read exactly as the setting.
Read more
More
$57.95
- Compare At:
-
$68.96
- You Save:
-
$11.01
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935086
The Surface Unit Switch Kit is an OEM part for Frigidaire ranges. It controls the power and heat levels to the surface burners on the cooktop, allowing you to adjust the temperature for cooking. This kit typically includes the necessary components to replace a faulty switch and restore proper functionality to the burners.
Causes of a bad surface unit switch can include electrical malfunctions, wear and tear from regular use, or damage due to spills or impacts. A faulty switch can prevent the burner from heating correctly or at all.
Symptoms of a bad surface unit switch include:
- Burners not heating up or heating unevenly
- Inability to adjust the burner temperature
- Burners not turning on or off properly
- Sparks or electrical odors near the switch
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My kenmore electric range burners were constantly on high Eric M. • Long Beach , CA • January 23, 2017
When I called customer service your representative at Appliance Parts Pros was able to help me diagnose the problem and order the two parts that I needed. both parts arrived the next day and with helpful tutorial videos I was able to replace both the Surface Unit Switch and the Universal Element in less than 45 minutes.
Thanks so much for the great service and the money you saved me.
Read more
More
$45.28
- Compare At:
-
$53.88
- You Save:
-
$8.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304524341
The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.
Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.
Symptoms of a bad freezer lens include:
- Cloudiness, fogginess, or smears inhibiting internal visibility
- Cracks or breaks compromising the protective barrier
- Distorted views make it difficult to assess food levels
- Diffused lighting with shadows instead of a clear view
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken lens cover for oven light Joy K. • Connelly Spg , NC • July 18, 2014
I purchased the lens cover from your on-line store. It came within the week. I was able to change the lens cover without any problems. My husband takes care of things like this for me at home, but this cover was for my mother's oven. I broke the one she had when I was cleaning her oven and changing the bulb.
Read more
More
$18.44
- Compare At:
-
$21.76
- You Save:
-
$3.32
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400
Oven light not working or saw a flash near the bulb? This light socket houses the oven bulb and is a straightforward DIY fix in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Light socket inside oven broke Linda S. • Novato , CA • June 02, 2015
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm!
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508926
Burner won't turn off or element light stays on? This range burner control switch regulates temperature and power. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
The control knob was orginal equipment but the switch installed by a sears tech was not and the knob eventually would not work the switch Kevin W. • Yucca Valley , CA • December 19, 2016
I went on your website found the parts needed to make the repairs. I watched the short video on installation. The parts arrived just a few days after I placed the order. I finished the repair in less than an hour and had to wait a few minutes to test the switch since the power was off and on due to a wind storm. Simple easy to do repair and I saved $90.00 on service fee for a tech to do the repair.
Read more
More
$62.95
- Compare At:
-
$75.54
- You Save:
-
$12.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303288565
This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.
- Fastens the switch body to a bracket or chassis panel
- Helps keep the switch aligned for consistent actuation
- Replaces stripped, corroded, or missing mounting hardware
- Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area
What's included: 1 truss-head machine screw (#8-32 x 3/16) Install notes:
- Disconnect power to the appliance before servicing
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Verify thread size and length match the original hardware
- If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$7.31
- Compare At:
-
$12.93
- You Save:
-
$5.62
Genuine Frigidaire part
By: Frigidaire
Part Number: 316008401
Size: 3/4 inch od x 1/4 inch id.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
$8.56
- Compare At:
-
$10.27
- You Save:
-
$1.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 318345205
Wire rack for ovens. Provides a stable surface for placing dishes and cookware. Replace if discolored, warped, damaged, or no longer fits properly.
Do-It-Yourself Stories from Customers like You
Replace oven racks. Jessica D. • Clearwater , FL • November 03, 2019
Special order size 22 1/2 by 14 1/2 oven racks. Ordered on Wednesday and delivered on Thursday!! Fantastic!!
Read more
More
$90.40
- Compare At:
-
$108.48
- You Save:
-
$18.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 318053103
Oven door gasket creates a tight seal to maintain temperature. Replace if torn, flattened, or crispy. Clips into door frame. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
18 year old oven; works great but racks ugly/discolored and impossible to clean well enough; door seal flattened and discolored Cathryn S. • Breckenridge , CO • September 01, 2018
Bought two new racks - beautiful! Bought replacement door seal: watched simple video and installed new seal in less than 10 minutes. Extremely pleased and impressed with entire experience as a first-time customer.
Read more
More
$94.95
- Compare At:
-
$112.99
- You Save:
-
$18.04
Genuine Frigidaire part
By: Frigidaire
Part Number: 316105501
Range drawer glide with integrated ball bearings ensures smooth drawer operation. Replace when drawer sticks, won't close, or bearings are bent or damaged.
More
$72.38
- Compare At:
-
$86.13
- You Save:
-
$13.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 389082702
Fixes dual burner when inner ring stops heating or entire element fails. Common cooktop repair—disconnect power, lift top, replace element. Takes 30-60 minutes.
Do-It-Yourself Stories from Customers like You
The center of a dual surface element not working George L. • Saint Petersburg , FL • June 16, 2019
I replaced the bad element with a new one.
Read more
More
$168.95
- Compare At:
-
$201.05
- You Save:
-
$32.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 316136600
This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
Oven won't turn on, control board failure convection motor failure Jonathan O. • Lorena , TX • November 12, 2018
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out.
Read more
More
$14.44
- Compare At:
-
$17.04
- You Save:
-
$2.60