Lg Dryer TD-V10018E Parts
Genuine Lg part
By: Lg
Part Number: 6931EL3003D
The Hi Limit Thermal Fuse is an OEM part for LG dryers. This fuse is a safety device that protects the dryer from overheating by cutting off power to the heating element if the dryer’s temperature exceeds a safe limit. It ensures that the dryer operates within safe temperature ranges, preventing potential fire hazards.
Replace the hi limit thermal fuse if it becomes faulty due to wear and tear, a buildup of lint, or exposure to high temperatures over time. A malfunctioning fuse can compromise the dryer’s ability to regulate heat properly.
Symptoms of a bad hi limit thermal fuse include:
- The dryer not heating
- The dryer shutting off unexpectedly during a cycle
- No response from the dryer when attempting to start a cycle
- Extended drying times due to lack of heat
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Lg dryer no heat Jeffrey J. • Emerald Isle , NC • June 06, 2016
Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same...
Read more
More
$19.31
- Compare At:
-
$22.98
- You Save:
-
$3.67
Genuine Lg part
By: Lg
Part Number: 6500EL3001A
The Dryer Moisture Sensor Bar is an OEM part for LG dryers. It plays a critical role in detecting the moisture level of clothes during the drying cycle, enabling the dryer to adjust the drying time automatically. This ensures efficient operation, preventing over-drying, which can damage fabrics and increase energy consumption.
Symptoms of a bad Dryer Moisture Sensor Bar include:
- Clothes remaining damp after a complete drying cycle
- The dryer continually running without stopping
- Inconsistent drying results, with some clothes over-dried and others still wet
Causes of a bad moisture sensor bar can stem from a buildup of lint and fabric softener residue, which insulates the sensor and impairs its ability to accurately detect moisture. Additionally, wear and tear or damage from loading and unloading can affect its functionality.
Regular cleaning and maintenance are recommended to ensure that your LG dryer operates efficiently and preserves the life of your clothes.
Do-It-Yourself Stories from Customers like You
It wouldn't heat James C. • Mooresville , NC • June 29, 2019
After I cleaned out the typical 1.5 pounds of lint from the vent, ( I do it every 2 months), I went searching for a solution. I found 6 possible causes on this site and purchased everything except a new burner; I wasn't going to go that far. Let the fun begin. Since my vacuum was still nearby, I thought I was ready for anything. Wrong. After I watched all the videos again for reassurance, I went in with screwdriver in hand and laptop nearby. I removed the top and looked inside. Don't be fooled,...
Read more
More
$21.46
- Compare At:
-
$25.32
- You Save:
-
$3.86
Genuine Lg part
By: Lg
Part Number: 4561EL3002A
Maintains tension on your dryer's drum belt for smooth rotation. Replace if pulley wheel is cracked, shaft worn, or assembly moves excessively during operation.
Do-It-Yourself Stories from Customers like You
Noisy spin Troy E. • Salem , NH • April 16, 2018
Was going to order 4 new wheel & spindle sets, then saw you could get just the wheel for 1/3 the cost, so I ordered those. Then in the frequently ordered other items I saw the idler wheel assy. So I ordered one of those also. Glad I did, it was in worse shape than any of the wheels which still seemed to spin freely after I got all the hairs and crap off them. Anyways, went by the video step by step. Pretty straightforward. Have a good vacuum handy, I’m surprised that it used to dry at all...
Read more
More
$64.53
- Compare At:
-
$76.79
- You Save:
-
$12.26
Genuine Lg part
By: Lg
Part Number: 4036EL3001A
Replace your dryer drum seal when clothes take longer to dry or you notice lint buildup. Maintains heat efficiency and prevents air leaks. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Lg dryer making loud noises Michael B. • Dublin , OH • January 07, 2017
From reading "troubleshooting" sites on the internet, originally thought I'd be replacing the front & rear drum rollers, so I ordered the rollers, and a new belt before I opened up the dryer, taking it out of use. When I opened it up the front rollers were "shot", and the front bulkhead was "totaled". Waited for parts to arrive (within 2 days), and successfully replaced front & rear rollers, bulkhead, drum seal. The on-line videos really helped me ensure I was keeping in the right order. My...
Read more
More
$43.95
- Compare At:
-
$52.74
- You Save:
-
$8.79
Genuine Lg part
By: Lg
Part Number: 6931EL3001E
Dryer not heating or overheating and shutting off? This thermostat assembly regulates temperature to prevent damage. Easy DIY repair in about 1 hour.
Do-It-Yourself Stories from Customers like You
It wouldn't heat James C. • Mooresville , NC • June 29, 2019
After I cleaned out the typical 1.5 pounds of lint from the vent, ( I do it every 2 months), I went searching for a solution. I found 6 possible causes on this site and purchased everything except a new burner; I wasn't going to go that far. Let the fun begin. Since my vacuum was still nearby, I thought I was ready for anything. Wrong. After I watched all the videos again for reassurance, I went in with screwdriver in hand and laptop nearby. I removed the top and looked inside. Don't be fooled,...
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Lg part
By: Lg
Part Number: 4560EL3001A
Idler pulley maintains tension on the dryer belt. Replace if worn, cracked, or causing belt slippage. Installs between motor and drum support system.
Do-It-Yourself Stories from Customers like You
Dryer was squeaking on start up and rumbling noise while running. Gene L. • Redmond , WA • December 01, 2020
I have an LG dryer purchased in 2007. Model: DLE9577SM. It was squeaking at start-up and rumbling a little. Not knowing what parts I would actually need, I ordered rollers with/without assemblies, tensioner pulley-only, new belt. After viewing this video a couple of times, I attacked my machine which is located in the comfort of my garage. Lots of room to spread out. Nice. This disassembly went OK however because, I suspect, my machine is 13 years old, the removal of the control panel was...
Read more
More
$30.54
- Compare At:
-
$36.65
- You Save:
-
$6.11
Genuine Lg part
By: Lg
Part Number: EBF61496102
This is a safety switch assembly that detects whether the dryer door is open or closed. It signals the control board to stop the drum and heating element when the door is opened during a cycle. Replace this switch if the dryer will not start, stops mid-cycle unexpectedly, or continues running with the door open.
Do-It-Yourself Stories from Customers like You
Dryer would not come on Leroy L. • San Francisco , CA • December 28, 2014
Bought a new switch assembly, watched the video, and replaced the switch. Thr dryer now runs fine. Replacement part matched esxactly.
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Lg part
By: Lg
Part Number: 5835EL1002A
Fix loud banging, grinding noise, or poor drying performance with a new dryer blower wheel. Restores proper airflow through drum and exhaust vent.
This part fixes the following symptoms
-
Too hot
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer would start then quit after about 5 seconds. No error codes-timer running nasal burnt smell. Larry T. • Morristown , TN • December 10, 2017
I replaced the dryer motor. I followed the repair video on the Appliance Parts Pro site, with a few modifications to the procedure. I loosened the control panel and flipped it forward to improve access to the wiring connectors. I also loosened the front panel and tipped it forward before disconnecting the door switch as there wasn't enough space to disconnect the switch otherwise. Removal of the blower assembly required the use of penetrating lubricant as the assembly was stuck on the motor...
Read more
More
$84.95
- Compare At:
-
$101.94
- You Save:
-
$16.99
Genuine Lg part
By: Lg
Part Number: 6323EL2001B
The Dryer Thermistor is an OEM part for LG dryers, designed to monitor and help regulate the temperature within the dryer by providing feedback to the control board about the temperature inside the drum. This allows the dryer to adjust its heat settings accordingly, preventing overheating and ensuring clothes are dried evenly and safely.
Symptoms of a bad Dryer Thermistor include:
- Clothes not drying properly or taking longer than usual to dry.
- The dryer repeatedly stopping during a cycle.
- Error messages appearing on the dryer's display panel.
- The dryer getting too hot or not heating enough.
Causes of a bad Dryer Thermistor can include a buildup of lint and debris affecting its ability to accurately sense temperature, wear and tear over time, or electrical issues within the dryer's circuitry.
This OEM LG part can also be used on Kenmore/Sears appliances.
More
$53.21
- Compare At:
-
$62.79
- You Save:
-
$9.58
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: 4681EL1008A
The Drum Motor Assembly is an OEM part for LG dryers. It serves as the powerhouse that drives the drum, enabling it to tumble clothes during the drying cycle. This essential component ensures your dryer operates smoothly, providing the necessary torque for consistent and efficient drying performance.
Causes of failure might include wear and tear from prolonged use, overload from trying to dry heavy loads, electrical issues like short circuits, or physical damage to the motor components.
Symptoms of a bad Drum Motor Assembly include:
- The dryer drum fails to turn, even though the dryer powers on.
- Unusual noises, such as humming or buzzing, indicating the motor is struggling.
- The dryer stops unexpectedly during cycles or won't start at all.
- Decreased drying efficiency or clothes taking longer to dry due to inconsistent drum speed.
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Extreme noise from motor, dryer would start and stop within a few seconds Michael W. • Morristown , TN • April 11, 2021
Replaced drive motor assembly. As luck would have it, the replacement motor was loud but at least ran for the entire cycle. APP was informed of the excessively noisy motor and immediately sent out a replacement, which is working just fine in relative silence. Tools used: Philips head screwdriver, channel lock pliers, 13mm socket, shop vac.
Steps
Disassembly
1. disconnect from power, press the on button to discharge potential residual power
2. remove top, disconnect wire harness from control...
Read more
More
$279.78
- Compare At:
-
$335.74
- You Save:
-
$55.96
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: 4027EL2001A
Note: May be able to use Whirlpool latch kit# 279570.
Do-It-Yourself Stories from Customers like You
Broken door latch Eric W. • Calabasas , CA • April 20, 2018
Great service parts came faster than expected and online video was perfect!
Read more
More
Genuine Lg part
By: Lg
Part Number: 4026EL3001A