Bosch Washer WAS32790EE Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer won't spin or shows F:43/E:21 error? Worn motor brushes are the likely cause. This repair typically takes 15-30 minutes with basic tools.

Shock absorber that cushions vibrations during spin cycles. Mounts between the drum and base. Replace if cracked, leaking, or worn to restore stability.

The Fastening Ring is an OEM replacement part for Bosch washers. This part is responsible for securely fastening the boot seal to the washer's drum, ensuring a watertight seal and preventing leaks during the washing cycle.

A bad fastening ring can occur due to wear and tear, damage from foreign objects, or improper installation. Signs of a faulty fastening ring include water leaks around the washer's door or visible damage to the boot seal.

Symptoms of a bad fastening ring include:

• Water leaks around the washer's door
• Excessive noise or vibration 
• Visible damage or deformation of the ring

Replace your worn-out or damaged fastening ring with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.

Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.

Symptoms of a bad washer filter-fluff include:

• Slow or incomplete draining of the washing machine
• Excessive lint on clothes after washing
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models. 

Connects washer door to front panel for smooth opening and tight seal. Replace if bent or worn to fix door alignment issues and prevent leaks. Confirm fit.

Adjustable leveling foot that installs on the bottom of your washer to provide stable support. Replace when cracked, worn, or missing to restore balance.

Flexible drain hose that routes water out of your washer during drain cycles. Replace if cracked, leaking, kinked, or disconnected from the pump.

The Fastener Ring is an OEM part for Bosch washing machines. It helps securely mount the door gasket in place, sealing in moisture and preventing leaks.

The fastener ring plays an important sealing role, firmly attaching the pliable door gasket that surrounds the washer door opening. This allows the gasket to function properly in preventing water from escaping during fill and wash cycles.

Symptoms of a faulty fastener ring include:

• Loose or detached door gasket
• Water leakage from around the washer door
• Extended or incomplete cycle times due to poor sealing
• Wet floors or surroundings after normal cycles

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Suspension spring for washer drum support system. Attaches between tub and cabinet to absorb vibration. Replace if broken, stretched, or detached.

Replacement mounting bracket holder that secures internal components in place. Install when original is cracked, broken, or missing to restore proper alignment.

Replace your washer's door boot gasket when you notice leaking, tears, or water pooling around the door. Confirm fit using your model number and revision.

Replace your washer door boot gasket if you notice water leaks during cycles or visible wear around the door seal. Verify fit with your model number.

Fix washer overfilling or not filling properly. This pressure sensor monitors water levels during wash cycles. Common repair for fill issues.

Routes water between washer components. Replace if cracked, worn, or leaking to restore proper water flow and prevent leaks. Confirm fit with your model.

This glass front panel replaces a cracked or damaged outer door surface to restore appearance and protect internal components. It provides the visible exterior surface for the appliance door and keeps the interior sealed from everyday wear. What it does:

• Replaces broken, cracked, or scratched outer door glass to restore the appliance's exterior
• Protects controls and internal layers behind the door from impact and debris
• Restores a smooth, easy-to-clean surface and original appearance
• Helps prevent sharp edges or glass fragments from exposing internal parts

• Handle carefully; wear cut-resistant gloves and eye protection to avoid injury from sharp edges
• Remove power to the appliance before starting any disassembly
• Follow OEM disassembly instructions for removing the door assembly and separating layers—do not force components
• If adhesive or clips are used, replace any damaged fasteners and allow adhesives to cure per manufacturer guidance