Kenmore Refrigerator 106.50222010 (10650222010, 106 50222010) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10864399
Replacement glass shelf for refrigerator interior storage. Installs in shelf frame to hold food items. Order if original is cracked, shattered, or broken.
Do-It-Yourself Stories from Customers like You
My ice bucket was cracked and my crisper and meat pan were broken Wendell Y. • Bellwood , IL • April 18, 2015
I took apart the old bucket with a screwdriver and put the new one with no problems.
Read more
More
$130.29
- Compare At:
-
$155.05
- You Save:
-
$24.76
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201537
Replaces the water tube that runs through your refrigerator door to the dispenser. Needed when the original tube is cracked, broken, or leaking.
Do-It-Yourself Stories from Customers like You
I needed to replace the water reservoir tube and freezer tube also Ken C. • Williamsburg , VA • January 28, 2016
I watched the videos for both jobs, which were excellent and "spot on" for the repair jobs.It didn't take me an hour to replace both lines. Keep up the good work on helping us repair and save money doing our own work.
Ken
Read more
More
$73.40
- Compare At:
-
$87.35
- You Save:
-
$13.95
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$11.51
- Compare At:
-
$13.70
- You Save:
-
$2.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11342242
Ice maker won't stop making ice? The shut off arm senses when the bin is full and stops production. Easy 10-minute DIY fix—just snap into place.
Do-It-Yourself Stories from Customers like You
The ice guard came off the icemaker and got tangled up and twisted in the bottom of the tray without the guard we had way too much ice being made Sandy S. • Yantis , TX • August 22, 2015
We bought a new ice guard and installed it. It is working really good now.
Read more
More
$44.25
- Compare At:
-
$52.21
- You Save:
-
$7.96
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388736
The Ice Dispenser Drum is an OEM replacement part for Whirlpool refrigerators. This drum is located in the ice maker assembly and is responsible for dispensing ice when activated. It rotates to push ice through the chute and into your glass or container.
Causes of a bad ice dispenser drum include wear and tear from regular use, damage from ice jams, or breakage due to accidental mishandling. Accumulation of ice and debris can also cause the drum to malfunction.
Symptoms of a bad ice dispenser drum include:
- Ice not dispensing properly
- Grinding or clicking noises during operation
- Inconsistent ice output
- The dispenser becoming jammed frequently
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
Broken ice dispenser drum Betty H. • Tahlequah , OK • April 13, 2014
Plastic drum was broken and wasn't pushing the ice through the crusher teeth. Received my part pronto and made the repair. Was an easy fix, took about 15 min from start to finish. Everything working very good now. ( : Thanks for getting the parts to me so fast. I will definitely remember Appliance Pro if I need parts in the future.
Read more
More
$51.95
- Compare At:
-
$61.82
- You Save:
-
$9.87
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W10156818
The Fan Blade is an OEM part for Whirlpool refrigerators. It is essential for circulating air throughout the refrigerator, ensuring that the temperature remains consistent and the cooling process is efficient. The fan blade helps distribute cold air from the evaporator coils to different parts of the refrigerator and freezer compartments, maintaining an even temperature throughout.
Over time, the fan blade can become damaged due to wear and tear, obstruction by debris, or impact from moving items within the refrigerator. If the fan blade is cracked, broken, or loose, it will not be able to circulate air effectively, leading to cooling issues and potential food spoilage.
Symptoms of a bad fan blade include:
- Unusual noises coming from the refrigerator
- Inconsistent cooling or warm spots within the compartments
- The refrigerator running more frequently or for longer periods
- Frost buildup in the freezer
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
One of the fan blades broke off the condenser fan Kevin C. • College Station , TX • April 03, 2017
I pulled the refrigerator out, removed the back panel, disconnected the fan motor. I did not know how hard or easy it would be to remove the fan from the motor shaft so I removed the motor with the fan attached and then removed and replaced the fan. This would not be necessary if you have a lot of strength, but if you need leverage to push the fan down on the shaft you might want to disconnect and remove the motor fan assembly too. After replacing the motor assembly and reconnecting I tested by...
Read more
More
$48.37
- Compare At:
-
$57.56
- You Save:
-
$9.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681249
Mounting screw for refrigerator ice maker assembly. Secures components to maintain structural integrity. Replace if lost, stripped, or corroded.
Do-It-Yourself Stories from Customers like You
The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823511
The Ice Maker Water Line is an OEM part for Whirlpool refrigerators. It supplies water from the household plumbing to the ice maker, ensuring a consistent and reliable production of ice cubes. This kit includes a 1/4-inch plastic water line that is approximately 72 inches long. The tubing will need to be cut to match the desired length.
Causes of a bad water line can include wear and tear from prolonged use, kinks or bends restricting water flow, or leaks due to punctures or cracks. A compromised water line can result in inadequate ice production or water leaks.
Symptoms of a bad ice maker water line include:
- Reduced or no ice production
- Leaking water from the refrigerator
- Visible cracks or damage to the water line
- Ice cubes that are smaller than usual
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015
I watched your how-to video. It explained the repair PERFECTLY.
It was an easy repair and the video was very detailed. It took the guesswork out of the repair.
I was done in 5 minutes.
thanks for taking the time to post videos for your parts. I'll shop here again.
Best Regards,
Chad M
Read more
More
$26.74
- Compare At:
-
$31.82
- You Save:
-
$5.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2260518W
Replacement cap that seals the water filter housing and attaches to filter cartridges. Needed when cap is cracked, broken, or missing notches prevent secure fit.
Do-It-Yourself Stories from Customers like You
Both lugs on refrigerator water filter cap broke apparently due to age induced brittleness would not pull water filter out of refrigerator William F. • Birmingham , AL • June 01, 2016
Replaced filter cap with new one. The minor challenge was to find a method of pulling the filter out of refrigerator (which is normally done by pulling on the filler cap. The filter was recessed to far into the refrigerator for me to be able attach the new cap. I had to find another tactic to remove the filter. The solution was to look at the replacement filter to notice where two slots were located at the end of the filter. I then used a paint can opener (found at most paint stores) to slip...
Read more
More
$33.95
- Compare At:
-
$40.74
- You Save:
-
$6.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10190929
The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.
You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.
Symptoms of a bad Ice Mold include:
- Ice cubes not forming correctly or being irregular in shape
- Ice cubes sticking to the mold and not dispensing
- The icemaker not producing ice at all
- Leaks around the icemaker area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice forming in the ice cube bin Bill J. • Scottsdale , AZ • December 13, 2014
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level.
With guidance from the video, I removed the icemaker from the wall of the freezer. The...
Read more
More
$154.95
- Compare At:
-
$185.94
- You Save:
-
$30.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10366605
Freezer icing up or refrigerator too warm? This defrost control board coordinates defrost cycles to prevent frost buildup. DIY-friendly 15-30 min repair.
Do-It-Yourself Stories from Customers like You
Whirlpool refrigerator evaporator frozen up with ice along with warm refrigerator compartment Wesley W. • Millbrook , AL • February 26, 2015
Tried to put refrigerator in defrost mode and defrost would not initiate. Checked the bi-metal and heater, both tested good. Replaced the ADC board and refrigerator went in to defrost. problem solved.
Read more
More
$227.53
- Compare At:
-
$227.60
- You Save:
-
$0.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195051
The Dispenser Arm Strain Relief is an OEM replacement part for Whirlpool side-by-side refrigerators. It connects the water and ice dispenser arm to the fridge cabinet, absorbing tension during use.
Causes of a bad strain relief involve wear and flexing fatigue of the plastic over extensive dispensing cycles. Exposure to moisture or liquid damage inside the fridge liner may prematurely degrade connecting parts as well.
Symptoms of a bad strain relief include:
- Cracks, splits, or tears in the relieving plastic material
- Dispenser arm separation from the cabinet opening
- Missing pieces that compromised structural integrity
- Difficulty accessing or using the refrigerator's water/ice functions
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerator models.
Do-It-Yourself Stories from Customers like You
In door water dispensor Brian C. • Pve , CA • June 27, 2016
With the help of the fantastic videos provided on the web site for each replacement part, it was extremely easy to complete the repair
Read more
More
$17.48
- Compare At:
-
$18.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: 2159081
Creates an airtight seal around your refrigerator door perimeter to maintain proper cooling. Replace if cracked, torn, or no longer sealing. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
Worn out fridge door gasket. Jeanne W. • Greensboro , NC • July 10, 2022
Removed the worn gasket, cleaned the door, snapped on the new gasket.
Read more
More
$166.74
- Compare At:
-
$196.75
- You Save:
-
$30.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2176759
Refrigerator warm but freezer cold? Noisy evaporator fan? This mounting grommet reduces vibration and noise. Takes about 1 hour to replace with video guide.
Do-It-Yourself Stories from Customers like You
Ice maker quit and frig was warmer then usual Marc A. • Santa Cruz , CA • November 11, 2018
I noticed Ice maker Quit for the third time in 15 years so I decided to buy another Ice maker, I installed it and NO ice still?? Well I went after the other problem thinking if it does not get cold enough maybe ice maker won’t work. I ordered Defrost Switch, Heater and Evaporator Fan just to be safe. I replaced all three, the fan was noisy, the heater OHM’d ok but I replaced it as did the defrost switch, I put it back together, the Freezer got to 0 degrees and the frig got to 38 degrees so I...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07