Kenmore Refrigerator 106.51051990 (10651051990, 106 51051990) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 2172940
This replacement door inner glass restores a clear, protective viewing window so you can monitor cooking without opening the door. It fits the appliance's door assembly and replaces damaged, cracked or missing inner glass. What it does
- Serves as the inner protective glass in the appliance door for safe viewing during operation
- Restores visibility when the original glass is cracked, shattered or fogged
- Helps protect internal components from spills and debris that can enter the door cavity
- Replaces broken or chipped glass that may cause rattling or air leaks
What's included
- One door inner glass window
Install notes
- Disconnect power to the appliance before beginning any repair
- Handle glass with care and wear cut-resistant gloves and eye protection
- Removal typically requires opening or removing the door; keep track of screws and brackets
More
$12.95
- Compare At:
-
$13.21
- You Save:
-
$0.26
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2183733
$91.65
- Compare At:
-
$108.17
- You Save:
-
$16.52
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2194732
$23.64
- Compare At:
-
$26.00
- You Save:
-
$2.36
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2195108
$70.66
- Compare At:
-
$78.87
- You Save:
-
$8.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2197869
Fix ice buildup in your freezer with this refrigerator defrost heater. Solves frost accumulation on evaporator coils. Moderate DIY repair for most models.
More
$33.27
- Compare At:
-
$39.59
- You Save:
-
$6.32
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2209657
$25.56
- Compare At:
-
$26.44
- You Save:
-
$0.88
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2256178
$68.65
- Compare At:
-
$70.29
- You Save:
-
$1.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 489340
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10169512
$24.12
- Compare At:
-
$25.96
- You Save:
-
$1.84
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2169412
$48.83
- Compare At:
-
$50.85
- You Save:
-
$2.02
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2262184
Fix a refrigerator that won't cool or start. This compressor relay starter repairs clicking sounds or failure to start. Simple DIY replacement part.
More
$59.48
- Compare At:
-
$70.78
- You Save:
-
$11.30
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180259
The Ice Dispenser Lever is an OEM component specifically designed for Whirlpool side-by-side refrigerators with built-in ice dispensers. Located inside the ice and water compartment, the lever is responsible for releasing cubed or crushed ice when engaged.
Symptoms of a bad ice dispenser lever include:
- Failure to dispense ice when the lever is lifted
- Loose, wobbly, or uneven movement of the lever
- Ice dispenser mechanism not triggering properly
Causes of a bad lever can be worn gears or connector linkages inside the ice dispensing mechanism from repeated use over time.
This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and select Kenmore fridge models.
Do-It-Yourself Stories from Customers like You
The ice dispenser lever was cracked and did no longer trigger the dispensing of the ice Andrea M. • Honolulu , HI • March 01, 2015
I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better.
I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823377
Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.
This part fixes the following symptoms
-
Door sweating
-
Door won't open or close
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Ice cube dispenser/flap was broken not actuating the ice bucket motor. Peter P. • Sonoma , CA • July 24, 2023
Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy.
When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4386774
The Roller Assembly is an OEM part for Whirlpool refrigerators. This assembly includes the rollers that support and allow the refrigerator to be moved easily for cleaning or maintenance. Proper functioning rollers ensure smooth movement and stability of the appliance.
Causes of a bad roller assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or exposure to moisture leading to rust or corrosion.
Symptoms of a bad roller assembly include:
- Difficulty in moving the refrigerator
- Uneven or unstable placement of the appliance
- Unusual noises when moving the refrigerator
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The rubber on the roller assembly was ripped off Richard S. • Richfield , UT • July 15, 2018
Took the old assembly off and put the new on, just bolts on, very easy.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155590
This fan motor retainer secures the refrigerator's fan motor to its mounting bracket or shroud, reducing vibration and keeping the fan aligned so air circulates properly for consistent cooling.
- Secures the fan motor to its bracket or shroud
- Maintains proper fan alignment and clearance for consistent airflow
- Helps reduce vibration, buzzing, or rattling from a loose motor
- A worn or missing retainer may present as scraping fan noises or uneven airflow
What's included: 1 fan motor retainer
- Disconnect power to the refrigerator before servicing; allow moving parts to stop and wear cut-resistant gloves
- Access the fan area per your model
- Transfer the motor into the new retainer and reinstall using existing hardware as required
- Ensure the fan blade spins freely and clears the shroud before restoring power
Do-It-Yourself Stories from Customers like You
Evaporate motor went out on my Whirlpool refrigerator freezing cold at the bottom but warm on top Toan N. • Anaheim , CA • June 24, 2018
When I first found out that the evaporator fan doesn't work, I went to a local home appliances store to buy one , cost me $40 , real easy to replace it and it solves the main problem , but this evaporator motor was making some loud noise every now and then , especially when we open the door too often. Then I ordered another one from Repair Clinic , this one is even worst , making a loud hum noise constantly, I had to return it. My wife really wants to buy another refrigerator but I don't...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2256010
Do-It-Yourself Stories from Customers like You
Clip and inside bars missing in fridge Lori T. • Mount Juliet , TN • July 10, 2017
Piece of cake. Literally no hardware required.
Just looked at the diagram provided for my fridge.
The parts fit perfectly.
The replacement clip was inexpensive.
The 2 bars I needed I thought were very expensive. But I needed them so I could store my condiments- to free up space on my shelves.
But - I did it all by myself.
No man- no tools. :)
Read more
More