Kenmore Refrigerator 106.52209100 (10652209100, 106 52209100) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: L2206928T
$447.43
- Compare At:
-
$523.37
- You Save:
-
$75.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: L2206928W
$442.95
- Compare At:
-
$527.20
- You Save:
-
$84.25
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: L2223073S
$614.24
- Compare At:
-
$724.80
- You Save:
-
$110.56
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2224015
$29.95
- Compare At:
-
$31.68
- You Save:
-
$1.73
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823377
Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.
This part fixes the following symptoms
-
Door sweating
-
Door won't open or close
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Ice cube dispenser/flap was broken not actuating the ice bucket motor. Peter P. • Sonoma , CA • July 24, 2023
Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy.
When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201786
The Compressor Starting Device Kit is an OEM part for Whirlpool refrigerators. This kit includes the necessary components to help the compressor start and run efficiently, ensuring that the refrigerator maintains the correct temperature to keep food fresh.
Causes of a bad compressor starting device can include electrical surges, wear and tear over time, or overheating due to excessive usage or poor ventilation around the refrigerator.
Symptoms of a bad compressor starting device include:
- The refrigerator not cooling properly
- The compressor not starting or frequently cycling on and off
- Unusual clicking or buzzing noises from the compressor area
- The refrigerator being unusually warm
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My whirlpool refridgerator stopped cooling / clicking sound heard coming from the compressor Mary G. • Stevensville , MD • November 29, 2014
I unplugged the unit, removed the back cardboard panel and replaced the compressor starting device, and also the capacitor. Plugged the unit back in and the compressor came on and immediately began cooling. I was so happy (proud of myself) for diagnosing the problem and fixing the unit. I can't take all the credit though... Thank You Appliance Parts Pros for your great website with all the helpful tips and suggestions. Easy ordering of parts and extremely quick shipping...I highly recommend...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4317852
The Alumilastic Cement is an OEM part for Whirlpool appliances, typically used in refrigerators and freezers. It serves as a thermal mastic compound, designed to provide a secure and heat-conductive bond between various components, such as evaporator coils and the interior walls of the appliance.
Causes of a bad alumilastic cement can include drying out, cracking, or losing its adhesive properties over time. This can occur due to age, exposure to temperature fluctuations, or improper application. When the cement fails, it can lead to poor thermal conductivity and decreased cooling efficiency.
Symptoms of a bad alumilastic cement include:
- Reduced cooling performance
- Unusual noises from the cooling system
- Components becoming loose or detaching
- Increased energy consumption
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!!
The do it yourself video was extremely helpful and made the repair very easy.
Thanks so much for the great service and quick delivery !!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4386774
The Roller Assembly is an OEM part for Whirlpool refrigerators. This assembly includes the rollers that support and allow the refrigerator to be moved easily for cleaning or maintenance. Proper functioning rollers ensure smooth movement and stability of the appliance.
Causes of a bad roller assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or exposure to moisture leading to rust or corrosion.
Symptoms of a bad roller assembly include:
- Difficulty in moving the refrigerator
- Uneven or unstable placement of the appliance
- Unusual noises when moving the refrigerator
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The rubber on the roller assembly was ripped off Richard S. • Richfield , UT • July 15, 2018
Took the old assembly off and put the new on, just bolts on, very easy.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2254920
Color: clear. It measures about 18 inches wide by 4 inches high.
Do-It-Yourself Stories from Customers like You
After many years, the light lens was discolored and malformed. Jorg L. • Las Vegas , NV • March 07, 2018
The replacement lens was easily installed.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 2203561B
This is the black water dispenser lever for the refrigerator door dispenser. It's the paddle you press with a glass to activate the water dispenser, restoring smooth, reliable dispensing if the original lever is cracked or broken.
- Activates the dispenser switch when pressed to release water
- Common fix for a cracked/broken paddle or lever that won't spring back
- Can resolve issues where pressing the paddle does not start water flow
- Helps restore proper feel and function at the dispenser
What's included: 1 black water dispenser lever Install notes:
- Disconnect power before servicing the dispenser area
- Carefully remove the dispenser trim/cover to access the lever and mounting points
- Transfer any springs or hardware from the original lever
- Support wiring and components to avoid pinching; recheck operation before reassembling
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212369
Do-It-Yourself Stories from Customers like You
Ice maker dispensor was broken Ann G. • Seal Beach , CA • May 02, 2016
I simply changed to broken part. It was easy.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 2203562B
Do-It-Yourself Stories from Customers like You
Ice cubes dispenser would not work without messing with it every time. Timothy M. • Arnold , MO • January 24, 2018
The dispenser door was the problem. Replaced the door. I figured I would replace the lever and the ice guide with it.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201513
Compression nut for 5/16" plastic water line.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206934J
This handle is graphite. For white order WP2206934W and for black order WP2206934B.
Do-It-Yourself Stories from Customers like You
Broken handle Jesse R. • Macon , GA • March 06, 2015
Removed upper and lower trim pieces, removed 4 screws, handle and re-assemblied.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206905
This small mounting clip secures the appliance trim so panels stay aligned and snug. It helps keep door or console trim from shifting, rattling or separating from the cabinet for a cleaner appearance and fit. What it does:
- Anchors trim pieces to the cabinet or door frame to maintain proper alignment
- Prevents trim from moving, vibrating, or producing rattling noises
- Restores a tight seam or gap caused by a broken or missing clip
- Works with original trim pieces—use when trim no longer holds securely
What's included: One trim mounting clip Install notes:
- Disconnect power to the appliance before removing trim or working near electrical components
- Remove the affected trim piece carefully to access the clip; a trim tool or flat screwdriver may help gently pry panels
- Align the clip and press or snap the trim back into place until it seats securely
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206918B