Kenmore Refrigerator 106.56719500 (10656719500, 106 56719500) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478
Size: 8 x 1/2 ab.
Do-It-Yourself Stories from Customers like You
Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2305258
The Door Chute is an OEM part for Whirlpool refrigerators. This part directs ice from the ice maker into the ice bucket or dispenser chute. The door chute ensures a smooth and controlled flow of ice, preventing spills and maintaining the efficiency of the ice dispensing system.
Common issues include cracks, warping, or blockages that can obstruct the flow of ice and affect the dispenser's performance.
Symptoms of a bad door chute include:
- Ice not dispensing properly
- Ice jamming or clogging in the chute
- Leaks or drips around the ice dispenser area
- The door chute not sealing correctly
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice maker door wouldn’t open Mickey W. • Ponca City , OK • April 20, 2020
Talked to a service rep. and he helped me diagnose what was needed.
Read more
More
$15.47
- Compare At:
-
$18.41
- You Save:
-
$2.94
Genuine Whirlpool part
By: Whirlpool
Part Number: W11778262
This cam-door is the small pivoting cam that helps a washer/dryer or laundry door latch and swing smoothly. Replacing a worn or broken cam restores proper door movement and helps the door close and seal reliably. What it does:
- Acts as the pivot/latch cam that guides the appliance door during opening and closing.
- Helps the door engage the latch and maintain correct alignment.
- Commonly used to stop a door from hanging, binding, or failing to stay closed.
- Can reduce door noise or catching caused by a damaged cam.
What's included: Includes: One cam-door. Install notes:
- Disconnect power (unplug or switch off breaker) before starting any repair.
- Support the door or cabinet panel during removal to prevent dropping or damage.
- Remove the door or access panel and replace the cam using basic hand tools; keep track of fasteners.
- After reassembly, check door operation and latch engagement before returning the appliance to service.
Do-It-Yourself Stories from Customers like You
Door clicking, door not closing easily Mike K. • Broadview Heights , OH • January 27, 2020
Replaced both sets of door cams on my Kenmore Elite Refrigerator. The most important thing to know is that you DO NOT have to remove the doors from the refrigerator to replace BOTH sets of cams. You just have to remove the lower grill which is a snap fit (I also turned off the water and unplugged the unit). My fridge has an ice and water dispenser where the water and electrical lines go through the cams on the left side. Be sure to order the correct parts as the cam holes on the freezer side...
Read more
More
$6.75
- Compare At:
-
$7.50
- You Save:
-
$0.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196483
The Shelf Stud is an OEM part for Whirlpool refrigerators. It serves as a support peg that holds the refrigerator shelves in place, ensuring they remain stable and properly positioned.
Causes of a bad shelf stud can include wear and tear from regular use, accidental impact that causes the stud to break, or repeated removal and reinstallation of shelves leading to loosening or damage.
Symptoms of a bad shelf stud include:
- Shelves not staying securely in place
- Shelves tilting or collapsing
- Visible cracks or damage to the stud
- Difficulty in inserting or removing shelves
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This is a rear stud with a screw. For the front stud with screw use part number W11223328. For studs with no screw use kit part number 4388538.
Do-It-Yourself Stories from Customers like You
Broken shelf and drawer. Regina M. • Yardley , PA • November 10, 2017
Myself
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155013
Clip for bottom grill. If your original clip is riveted, order screw WP489478.
Do-It-Yourself Stories from Customers like You
The water pressure from the door was a trickle and ice cubes we're hollow Patricia R. • Shoreline , WA • June 18, 2020
Did research on line and figured it was valve inlet part. The helpful video you provide made me realize that it was an easy job to complete. Yes it was easy because of the video and the part was exactly what was needed. We saved money by doing it ourselves. So while we were on the order site we ordered the brackets for the front grill. The old ones snapped off a long time ago. Again helpful video on your site on how to do the replacement ourselves. We now have water pressure back and that...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2223752
Mounts on the bottom of the freezer door.
Do-It-Yourself Stories from Customers like You
Door clicking, door not closing easily Mike K. • Broadview Heights , OH • January 27, 2020
Replaced both sets of door cams on my Kenmore Elite Refrigerator. The most important thing to know is that you DO NOT have to remove the doors from the refrigerator to replace BOTH sets of cams. You just have to remove the lower grill which is a snap fit (I also turned off the water and unplugged the unit). My fridge has an ice and water dispenser where the water and electrical lines go through the cams on the left side. Be sure to order the correct parts as the cam holes on the freezer side...
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387911
This push-button door switch senses when your refrigerator door opens and closes to control the interior light. Replace a worn or stuck switch to restore reliable lighting and proper on/off operation when the door moves. What it does:
- Turns the interior light on when the door opens and off when it closes
- Common fix for a light that won't turn on with the door open
- Resolves lights that stay on continuously with the door closed
- Addresses intermittent lighting from a sticking or damaged plunger
What's included:
Install notes:
- Disconnect power to the refrigerator before servicing
- Carefully pry the old switch from the liner; protect the surface to avoid damage
- Transfer wires to the new switch one at a time to maintain correct connections
- Press the new switch fully into place and restore power to test operation
Do-It-Yourself Stories from Customers like You
A failed freezer door switch was causing the fridge to display that the door was open when it was not this caused it to beep at random Kara H. • Charleston , SC • March 08, 2016
We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: 4210463RW
This flexible, narrow brush reaches under and behind the cabinet to sweep dust and lint from condenser coils and vents. Cleaning built-up debris helps restore airflow and support proper cooling performance.
- Sweeps dust, lint, and pet hair from condenser coils and ventilation areas
- Flexible reach helps access coils beneath or behind the appliance
- Aids proper heat dissipation by clearing airflow paths
- Helpful when coils are visibly dirty, cooling seems weak, or the unit runs longer than usual
What's included: 1 condenser coil cleaning brush
- Unplug or disconnect power before cleaning
- Remove the toe grille or rear access panel if needed to access coils
- Brush gently along the coil fins; avoid bending fins or damaging tubing
- Vacuum or wipe up loosened debris before replacing any panels and restoring power
Do-It-Yourself Stories from Customers like You
Failed condenser motor John F. • New Palestine , IN • February 29, 2016
Replaced bad condenser motor
Read more
More
$28.25
- Compare At:
-
$33.62
- You Save:
-
$5.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10311033
Color: Black
Do-It-Yourself Stories from Customers like You
Damaged grill Gloria M. • Lanham , MD • November 24, 2019
Ordered a replacement from Appliancepartspros
Read more
More
$90.95
- Compare At:
-
$108.23
- You Save:
-
$17.28
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2318736
This large refrigerator door shelf retainer bar secures items on the door shelf, keeping jars and bottles from sliding out during everyday use. Replace a broken or missing bar to restore safe, reliable door storage.
- Holds contents on the refrigerator door shelf; stabilizes items when the door opens or closes
- Replace when the bar is cracked, warped, or missing
- Common symptoms: items fall from the door shelf, bar won't stay attached, loose fit
- For the refrigerator compartment door in the large position
What's included: One large refrigerator door shelf retainer bar Installation notes:
- Remove items from the affected shelf; allow cold plastic to warm to room temperature before handling
- Release the old bar from the endcaps or slots and inspect mounting points for damage
- Align and snap the new bar fully into both ends; verify a secure fit before reloading
- No power is typically required; wear gloves and avoid excessive force to prevent cracking
Do-It-Yourself Stories from Customers like You
Broken door bin. Carol C. • Melbourne , FL • October 05, 2017
After initiating a chat with the AppliancePartsPros representative, I got the correct part ordered. Once received, it fit perfectly. I'm glad I check with the representative before ordering as I might have otherwise ordered the wrong part.
Read more
More
$53.95
- Compare At:
-
$55.48
- You Save:
-
$1.53
Genuine Whirlpool part
By: Whirlpool
Part Number: W10136387A
Color: clear. It measures about 6 inches wide by 3-1/2 inches high by 15 inches deep.
Do-It-Yourself Stories from Customers like You
Missing egg case for frig Laura W. • Coupeville , WA • June 19, 2016
I got online and found the egg carton case for my refrigerator - ordered it - it arrived and was exactly what I wanted. Online shopping is AMAZING!!
Read more
More
$11.34
- Compare At:
-
$13.49
- You Save:
-
$2.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2305204
This part is the dispenser ice door support. It mounts and aligns the ice chute flapper (ice door) in the freezer door so it pivots and seals correctly, helping reduce warm air leaks, frost, and ice clumping. What it does:
- Provides the pivot/mount for the dispenser ice chute door (flapper)
- Keeps the ice chute door aligned to help maintain a proper seal
- Wear or broken tabs may cause the flapper to stick open/closed
- May lead to frost in the chute, condensation, air leaks, or clumping ice
What's included:
Install notes:
- Unplug the refrigerator and remove the ice bin before servicing
- Remove dispenser trim/control to access the chute assembly
- Note spring and flapper orientation; transfer the door, seal, spring, and any hardware to the new support
- Verify smooth flapper movement and full seal before reassembly and restoring power
Do-It-Yourself Stories from Customers like You
Replaced 2 broken parts saved fridge. Roger M. • Ravenna , OH • June 17, 2023
Replaced the 2 parts that had broken (due to the wrong plastic selection by Kenmore IMO.
The motor needed to be re-clocked but this video https://youtu.be/QK8C8rxbkhc gave the information needed.
Between AppliancePartsPros.com and youtube I have rebuilt this fridge (water valve, Ice maker, Auger gearbox and ice shute door)
Probably could do the job in about 30 minutes now that I know how and exactly what needs to be done. Only needed the pliers to turn the motor shaft
Read more
More
$43.95
- Compare At:
-
$51.86
- You Save:
-
$7.91
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212322
This icemaker mounting bracket secures the ice maker to the freezer wall, keeping the assembly level and correctly aligned with the fill tube. Replacing a bent or broken bracket helps restore stable ice production and reduces rattling or leaks.
- Supports and stabilizes the ice maker assembly inside the freezer
- Maintains proper alignment with the fill tube and ejector mechanism
- Helps prevent vibration, rattling, and water overspray that can cause ice clumps or cubes missing the bin
- Common signs include a loose or sagging ice maker, crooked alignment, noise during harvest, or water/ice buildup near the fill area
What's included: 1 mounting bracket Install notes:
- Unplug the refrigerator and shut off the water supply before servicing
- Remove the ice bin and ice maker to access; transfer and reuse existing screws to install the new bracket in the factory holes
- Level the ice maker and confirm fill-tube alignment before tightening fasteners
- Restore power and water; check for leaks and normal ice production
Do-It-Yourself Stories from Customers like You
Ice maker failed James T. • Summerville , SC • June 02, 2015
Purchased a new ice maker, and mounting bracket, installed them, plugged in the ice maker. One note of advice. Put your old ice maker and ALL extra parts in a safe place where you can find them, but your significant other cannot. Why? Because if your significant finds them he/she may dispose of them and you will need them to install your new ice maker, I have learned the hard way.
Read more
More
$55.95
- Compare At:
-
$66.58
- You Save:
-
$10.63
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281163
This replacement screw secures panels, brackets, and internal components within your appliance. Replacing a missing or damaged fastener restores a tight fit, reduces vibration and noise, and helps keep parts properly aligned during operation.
- Fastens panels, trim, brackets, or internal components to the chassis
- Maintains proper alignment and stability during normal use
- Replaces missing, rusted, or stripped hardware
- Common symptoms: loose or rattling panels, vibration, difficulty fastening, or a visibly missing screw
What's included: 1 screw Installation notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Match length and thread to the original; replace one-for-one in the same location
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- If the receiving hole is stripped, repair threads or replace the clip/nut before installing
Do-It-Yourself Stories from Customers like You
Whirlpool wtw5000dw1 top loader door would not lock, spin cycle would not function John C. • Cornelia , GA • December 24, 2021
Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W10852517
This refrigerator ice auger sits inside the ice bin and rotates to move cubes or crushed ice toward the chute. Replacing a worn, bent, or stripped auger restores smooth, consistent dispensing performance. What it does:
- Rotates inside the ice bin to feed ice toward the crusher and dispenser chute
- Helps deliver either cubes or crushed ice depending on the selector
- Common symptoms: dispenser motor runs but no ice comes out, weak/intermittent dispensing, frequent ice jams, or grinding noises from the ice bucket
What's included:
Install notes:
- Unplug the refrigerator before servicing; remove and empty the ice bin
- Note the order of internal parts during disassembly; transfer any reusable hardware from the original assembly
- Wear cut-resistant gloves—metal and plastic edges can be sharp
- Reassemble so the auger turns freely by hand, reinstall the bin, restore power, and test the dispenser
Do-It-Yourself Stories from Customers like You
Ice would not dispense Gary A. • Chula Vista , CA • August 21, 2020
Found bad auger motor drive shaft, it was rounded on the end that goes into motor. While I was there I replaced the seal, auger (old one rusty) and coupler. The new auger is stainless steel (I believe and slightly longer) and should not corrode like old white one. If changing auger, make sure you put the assembly back together correctly (take a few pics of the old one and lay it out as taken apart). As always, parts arrived quickly.
Read more
More
$96.27
- Compare At:
-
$115.52
- You Save:
-
$19.25