Kenmore Refrigerator 106.9354290 (1069354290, 106 9354290) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10190929
The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.
You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.
Symptoms of a bad Ice Mold include:
- Ice cubes not forming correctly or being irregular in shape
- Ice cubes sticking to the mold and not dispensing
- The icemaker not producing ice at all
- Leaks around the icemaker area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice forming in the ice cube bin Bill J. • Scottsdale , AZ • December 13, 2014
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level.
With guidance from the video, I removed the icemaker from the wall of the freezer. The...
Read more
More
$148.95
- Compare At:
-
$175.76
- You Save:
-
$26.81
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387490
The Defrost Bimetal is an OEM part for Whirlpool refrigerators. This crucial component functions as a safety thermostat in the freezer's defrost system. It is designed to monitor and control the temperature of the evaporator coils during the defrost cycle, preventing them from overheating. By cutting off the defrost heater when the coils reach a certain temperature, the bimetal helps maintain optimal functioning and efficiency of the refrigerator’s defrost system.
Symptoms of a failing defrost bimetal include:
- Build-up of frost on the evaporator coils that does not melt during defrost cycles
- Refrigerator or freezer section getting too warm
- Continuous running of the refrigerator compressor
Causes of bimetal malfunction typically include corrosion, continuous exposure to extreme temperatures, and general wear over time, which can prevent it from responding accurately to temperature changes.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Freezer not defrosting
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fresh food section not cold freezer fine Mike D. • Redwood City , CA • February 20, 2015
Defrost circuit was broken, defrost thermostat failed and allowed the frost to build up and clog the ports . Replaced defrost thermostat and fixed the circuit.....the heating element worked again as the defrost thermostat was broken in the open position, not allowing the heating element to operate.
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2201061
The Door Shelf Bar is an OEM part for Whirlpool refrigerators. This part goes on the door to hold condiments on the shelf. This does not include the endcaps.
Causes of malfunction involve cracks developing from weight stress on fasteners.
Symptoms of a problematic shelf bar include:
- Gaps noticeable between shelves and door
- Visible bowing or sagging on panels
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Note: In some cases, you may have to cut to fit.
Do-It-Yourself Stories from Customers like You
Needed door rails. Bruce B. • Dallas , TX • July 18, 2017
It just popped right in after I received them promptly from you all!
Read more
More
$51.27
- Compare At:
-
$61.52
- You Save:
-
$10.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2263749
The Defrost Heater is an OEM part for Whirlpool refrigerators. This heater turns on during the defrost cycle to melt the frost on the evaporator coils. If you need the defrost thermostat order WP4387490
Causes may include cracked heater elements reducing heat output or open circuit damage limiting functionality over time.
Symptoms of a faulty heater involve:
- Periodic refrigerator odors
- Prolonged defrost cycles or remaining ice
- Frost and ice buildup beyond normal amounts
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Freezer frosting up Nathan F. • Belgrade , MO • April 17, 2015
Replaced the heater, timer, and wiring harness
Read more
More
$48.95
- Compare At:
-
$61.93
- You Save:
-
$12.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2164186
Approx. 11" H x 14" W x 17" Deep.
Do-It-Yourself Stories from Customers like You
No problem i was just missing the crisper drawers Christine H. • Hackensack , NJ • September 08, 2015
I called Appliance Parts Pros.com and asked the technician if he thought the parts I saw would fit so I ordered them and they did!
Read more
More
$96.48
- Compare At:
-
$114.81
- You Save:
-
$18.33
Genuine Whirlpool part
By: Whirlpool
Part Number: WP487576
The Hinge Washer is an OEM part for Whirlpool refrigerators. This part ensures smooth opening and closing by reducing friction between the door hinge and the refrigerator body.
Causes of a bad hinge washer can include normal wear and tear from frequent use, accumulation of dirt or debris, and exposure to moisture, which can lead to rust and corrosion.
Symptoms of a bad hinge washer include:
- Difficulty in opening or closing the refrigerator door
- A door that does not stay in place
- Squeaking or grinding noises when the door is moved
- Visible wear or deformation on the washer
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Freezer door would not close and seal properly Michael B. • Holly Hill , FL • August 01, 2019
By purchasing two replacement thimbles and two hinge washers.
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10289690
This ice maker cover shields the front of the ice maker assembly, protecting the module and moving parts from dust and accidental contact. Replacing a cracked or missing cover restores a clean, finished appearance and keeps components protected.
- Shields the ice maker's front components and control module
- Helps keep dust, splashes, and debris out of the mechanism
- Prevents accidental contact with moving ejector parts
- Replace if the cover is cracked, warped, missing, or will not stay attached
What's included: 1 ice maker cover Install notes:
- Unplug the refrigerator before servicing
- Access the ice maker in the freezer compartment
- Carefully release the retaining tabs and remove the old cover; note orientation
- Align the new cover and press until it snaps securely into place—do not force the tabs
Do-It-Yourself Stories from Customers like You
Ice maker quit working Peter S. • Lawton , MI • October 29, 2015
Replaced icemaker and shutoff arm. Easy project.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387478
The Light Socket Kit is an OEM part for Whirlpool refrigerators. This kit includes the light socket and necessary components to ensure proper installation and functionality. It is designed to hold the refrigerator light bulb securely and provide reliable electrical connections to illuminate the interior of the refrigerator.
Common causes of failure include wear and tear, corrosion from moisture, or damage from handling or bulb replacement.
Symptoms of a bad Light Socket Kit include:
- Refrigerator light not turning on
- Flickering or intermittent lighting
- Visible damage or corrosion on the socket
- Burned or melted areas around the socket
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The refrigerator light didn't work Maria V. • Sonoma , CA • November 21, 2014
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come.
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196003
The Thermostat Tube Shield is an OEM part for Whirlpool refrigerators. It functions as a barrier that covers and insulates the temperature control thermostat capillary tube. This shield ensures accurate temperature sensing and regulation by protecting the capillary tube from physical damage and external temperature influences.
Over time, the thermostat tube shield can become worn out or damaged due to factors like regular wear and tear, accidental impact, or environmental conditions such as humidity and temperature fluctuations.
Symptoms of a bad thermostat tube shield include:
- Inconsistent or inaccurate refrigerator temperatures
- The refrigerator running continuously or cycling on and off frequently
- Visible damage or wear to the shield
- Difficulty in maintaining the desired temperature settings
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The unit was not keeping suitable temperature if you tapped the cold control(thermostat) it would come on for one complete cylce Thomas J. • Destin , FL • February 12, 2016
Replacing the cold control solved the problem. While i was at it i also replaced the defrost timer and installed a new ice door.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2156007
The Door Shelf End Cap is an OEM part for Whirlpool refrigerators. This part secures the door shelf bar in place, ensuring that items stored in the door bins are properly supported and contained. The end cap attaches to the ends of the door shelf bar, providing stability and a finished look.
Causes of a bad end cap can include wear and tear from frequent use, heavy loads in the door bins causing stress and fractures, and accidental impacts or mishandling leading to cracks or breaks.
Symptoms of a bad door shelf end cap include:
- The door shelf bar becoming loose or falling off
- Cracks or breaks in the end cap
- Door bins not staying in place
- Difficulty in securing the door shelf bar
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing shelves Wallace C. • Sandston , VA • July 14, 2015
Parts arrived as expected and installed easily. The price was excellent. This sites exploded parts diagram for my appliance made ordering the parts much easier than other sites.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387913
The Relay and Overload Kit is an OEM replacement part for Whirlpool refrigerators. It is an essential component of the refrigerator's electrical control system, responsible for powering components and protecting circuits from overload.
Causes of a bad relay and overload kit include circuit malfunctions, failed or worn-out components, or improper installation.
Symptoms of a bad relay and overload kit are:
- Refrigerator not cooling or icing
- Components like lights or fans not working
- Buzzing or humming noises from the electrical control area
- Repeated blown fuses
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Refrigerator was not cooling Dennis L. • Mount Wolf , PA • October 31, 2016
Took access panel off the back of the refrigerator with 1/4 inch nut driver and found that the compressor was not running properly (humming and hot but not compressing). The compressor cooling fan was working as well as the fan in the freezer compartment.
I fixed the same problem with another refrigerator by replacing the relay and start capacitor on the compressor. I pulled these two items from the compressor connector (gently pry the brown part from the comp terminals first and then the...
Read more
More
$52.95
- Compare At:
-
$63.01
- You Save:
-
$10.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WP628356
This icemaker fill cup and bearing assembly directs water from the inlet tube into the ice mold and provides the pivot point for the shutoff arm. Replacing a cracked or missing cup helps stop leaks, misdirected fills, and inconsistent ice production.
- Channels incoming water into the ice mold to prevent splashing and overfilling
- Provides the pivot/bearing for the ice level (shutoff) arm
- Helps maintain consistent cube size and reliable icemaker shutoff
- Typical symptoms: water or ice buildup under the icemaker, overfilling or hollow/irregular cubes, or a loose/binding shutoff arm
What's included: 1 fill cup and bearing assembly Install notes:
- Unplug the refrigerator and shut off the water supply before servicing
- Remove the ice bin and detach the icemaker to access the side-mounted cup
- Position the new cup directly under the fill tube; secure with existing hardware and verify the shutoff arm pivots freely in the bearing
- Restore power and water; run a test fill and check for leaks
This part fixes the following symptoms
-
Ice maker dispenses too much ice
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken part Eva H. • Walnut Creek , CA • March 23, 2014
Watched online video and worked along - it was easy and quick - I was amazed!
Read more
More
$32.42
- Compare At:
-
$38.58
- You Save:
-
$6.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9791600
Do-It-Yourself Stories from Customers like You
I was missing a couple of pieces from my refrigerator Michelle E. • Brigantine , NJ • October 13, 2014
I ordered the parts and had them the next day. Thanks for such fast shipping!
Read more
More
$110.11
- Compare At:
-
$132.13
- You Save:
-
$22.02
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478
Size: 8 x 1/2 ab.
Do-It-Yourself Stories from Customers like You
Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627792
This ice maker shut-off arm is the wire lever that detects the ice bin level and stops production when raised. Replace a bent, broken, or missing arm to restore reliable on/off control of your icemaker.
- Monitors bin fullness; in the up position it opens the internal switch to pause ice making
- Lowers as ice is used so the icemaker can resume cycles
- Restores manual shutoff when you lift the arm
What's included: One shut-off arm Install notes:
- Disconnect refrigerator power and turn off the water supply before servicing
- Remove the ice bin for access; open the icemaker front cover if your model has one
- Pull the old arm straight out of the pivot holes; align and fully seat the new arm so it moves freely
- Restore power and lower the arm to resume ice production; the arm raises and stops production when the bin is full
Do-It-Yourself Stories from Customers like You
Ice maker cube tray worn Phillip M. • Ingleside , TX • April 14, 2015
Ordered a new ice maker from APP. All went well, did not think to keep shut off arm from old ice maker before I trashed it. Got lots of ice now.
Read more
More
$54.34
- Compare At:
-
$65.21
- You Save:
-
$10.87
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37