Kenmore Washer 110.47088600 (11047088600, 110 47088600) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10488048
Washer won't start or shows door lock error? The door strike secures the latch for safe operation. Easy 5-minute fix with just two screws—video available.
Do-It-Yourself Stories from Customers like You
My son slammed the door to the washer closed and broke the striker latch Vernon S. • Harbor City , CA • June 02, 2014
Ordered the striker latch, it arrieved in two days, I removed the two screws holding the broken latch and installed the new latch, then put the two screws back in. Wam Bam, it was fixed, it was easy.
Read more
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182233
Plastic baffle that mounts inside the washer drum to lift and tumble clothes. Replace if cracked, broken, or missing. Snaps into place on drum wall.
Do-It-Yourself Stories from Customers like You
Loose paddles/baffles Doug & Karen S. • Bellingham , WA • October 17, 2016
Searching for paddles or baffles led me to Appliance Parts. Discovered I didn't have to buy anything in order to view the video which is a pretty nice feature to see if my skills are up to it. "How in the world do I repair something without external screws?" "Take the top off the machine to see if there are any mounting screws and then just smack the baffles toward the rear of the machine with a mallet to loosen and remove?" Easy, really easy. My wife was missing an underwire to one of her bras...
Read more
More
$51.95
- Compare At:
-
$61.30
- You Save:
-
$9.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10467289
The Water Temperature Sensor is an OEM part for Whirlpool washing machines. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle. Note: The sensor does not include the seal WP8540766. Order separately if needed.
Causes of a bad temperature sensor can be failures over time due to mechanical wear, thermal stress on electronic components, or damage from leaks/flooding inside the unit.
Symptoms of a bad water temperature sensor include:
- Inability to switch between wash steps or advance through the cycle
- Erratic or inconsistent temperature readings
- Failure alarms or error codes displayed
- Improper or incomplete washing even on high heat settings
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
F2 e3 error code on front load duet washer Mark M. • Saratoga Springs , NY • September 16, 2016
Replace the water temperature sensor and still had the error code. While I had the back of the machine open I ran the washer. I traced the black wires from the temperature sensor and wiggled them as the washer was running. At one zip tie every time i moved the wires the washer would stop running and the error code would flash. Sure enough, like many others posted, the vibration from the machine had split the wire. I spiced the wire back together and have not had a problem since.
Read more
More
$33.95
- Compare At:
-
$40.40
- You Save:
-
$6.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10003250
Replacement drain hose for washing machines. Connects the drum to the drain outlet. Replace if cracked, split, leaking, or worn from rubbing against shocks.
Do-It-Yourself Stories from Customers like You
F02 fail to drain repeated suds warnings John C. • Eagle River , AK • February 18, 2019
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10004260
Fix F20 error codes and water level issues with this pressure switch hose. Connects sensor to tub for accurate water level detection. Easy 30-min repair.
Do-It-Yourself Stories from Customers like You
Whirlpool duet washer was stopping mid cycle with a F20 error code; owner's manual says it could be a water supply issue Ronnie H. • Cedar Park , TX • December 22, 2018
Several months back, I checked the supply hoses and replaced the hot water hose because of corrosion. The cold water hose was fine. I replaced the water inlet valve and that seemed to fix the problem, but after about a week, the problem resurfaced. After searching various internet resources, I though the pressure switch which detects the water level could be bad. I order both the pressure switch and the hose that connects it to the air chamber. Before installing the new pressure switch, I...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Water leaks around the hose connection points
- The hose slipping off the fitting
- Visible rust or wear on the clamp
- Difficulty in tightening the clamp to secure the hose
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.41
- Compare At:
-
$11.10
- You Save:
-
$1.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182650
Replace your washer's drive pulley if worn, wobbling, or has damaged mounting flats. Installs on the tub shaft to transfer belt motion to the drum.
Do-It-Yourself Stories from Customers like You
Drum not turning Paul H. • Seattle , WA • December 13, 2019
I pulled the unit away from the wall and noticed black dust on the floor. Unplugged the unit, turned off the water. Removed back panel (about 10 screws with Torx heads) and noticed the belt was off, the drive pulley was loose and wobbling on the shaft, black dust all over the inside. Belt was worn along one side. Some grooves/damage in the outer drum casing around the pulley where it appeared the belt had rubbed. Removed the lower crossbar (2 more screws) to get better access to the drive...
Read more
More
$97.95
- Compare At:
-
$116.56
- You Save:
-
$18.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8183196
This is a Whirlpool drive motor control board, or MCU, for washing machines. It monitors and controls the speed and direction of the drive motor. If this board fails, the washer likey will not work, and the display may show an error code like F70.Before installing this part, be sure to cut power to the appliance and allow it to drain, cool, and dry completely. The washer will need to be pulled away from any walls to properly access the control panel. After opening the panel, remove any mounting screws or wire harnesses connecting the old drive motor control board and install the new one in its place.This is a genuine OEM part compatible with washers manufactured by Whirlpool brands, including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product contains no additional parts or hardware.
Do-It-Yourself Stories from Customers like You
Machine would not power up (panel would no light up) i did have some error codes displayed before that f 70 was one code Steven P. • West Roxbury , MA • August 19, 2014
After much reading on line regarding my problem. I decided to do any test that I could to try to diagnose and fix this myself if I could. This took a lot of time and patience to get the answers on how to go about this from "experts" as some of the info was contradictory. I was almost about to give up and buy a new washer with less electronic parts and buttons as advised by an honest appliance technician . I tried one more thing first which was to disconnect the lead wires connected to the MCU ....
Read more
More
$269.38
- Compare At:
-
$297.62
- You Save:
-
$28.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540015
Rubber vent hose that connects the wash tub to the dispenser, allowing air circulation. Replace if cracked, leaking, or detached from the tub assembly.
Do-It-Yourself Stories from Customers like You
Washing machine leaking from water inlet and temperature sensor seal Richard H. • Park Ridge , NJ • March 21, 2015
Removed the leaking hoses and seal. Installed the new ones. They all fit perfectly. The disassembly/reassembly of the washer took the most time.
Read more
More
$33.27
- Compare At:
-
$39.59
- You Save:
-
$6.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181747
This replacement seal restores a watertight connection in your washer to help prevent leaks and moisture damage. It replaces a worn, cracked, or flattened original seal so components stay tightly sealed during use.
- Creates a compression barrier between mating parts to contain wash water
- Helps stop drips and seepage during fill, wash, or drain
- Can address water leaks, moisture under the unit, or musty odors from trapped water
- Replaces seals that are brittle, torn, or misshapen
What's included: 1 seal Install notes:
- Disconnect power and turn off water supply before servicing
- Access the seal location per your model's service information and note orientation
- Clean grooves and mating surfaces; seat the new seal evenly (a light film of water or mild soap can aid installation)
- Reassemble and run a short cycle to check for leaks
Do-It-Yourself Stories from Customers like You
The hose connecting the dispenser to the washer was leaking while removing the hose the plastic nipple from the dispenser broke off the machine is 20 years old Martin C. • Memphis , MI • February 08, 2016
I ordered the dispenser and the distribution nozzle since the old one was in bad shape. I also replaced the boot since I had to take the entire machine apart and it is 20 years old. I watched your videos on you tune to learn what to do. I recently lost my job and really could not afford to hire someone to fix my washer. I have to say it wasn't that hard to do and my wife was so happy that I was able to fix it myself! I probably saved $200 or $300 in service calls and labor on top of what they...
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181737
Routes wastewater from your washer to the household drain. Replace this hose if cracked, kinked, clogged, or leaking at connections to restore proper drainage.
Do-It-Yourself Stories from Customers like You
F02 fail to drain repeated suds warnings John C. • Eagle River , AK • February 18, 2019
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ...
Read more
More
$49.40
- Compare At:
-
$58.29
- You Save:
-
$8.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP89503
Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.
Do-It-Yourself Stories from Customers like You
Low water flow and fabric softener would dispense immediately when cycle started Bob G. • Sylacauga , AL • January 19, 2019
Replaced flow meter and control valve
Read more
More
$18.59
- Compare At:
-
$22.12
- You Save:
-
$3.53
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10005300
Connects detergent dispenser to wash tub for proper filling. Replace if cracked, leaking, or causing water pooling. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Washing machine was leaking below dispenser tray. Dan P. • Middletown , NY • November 02, 2020
The replaced hose from the dispenser and o-ring problem fixed.
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Whirlpool part
By: Whirlpool
Part Number: W10289554A
Stabilizes the drum during washer transport or moving. Includes four bolts that thread into rear bolt holes. Replace if original bolts are missing or lost.
Do-It-Yourself Stories from Customers like You
Needed to move it Deborah L. • Shelby , OH • April 20, 2015
The shipping bolts came in 2 days!!! Wow ! So we watched a video on how to install them and moved the washer without messing it up.. Thank you so much for fast and friendly service :-)
Read more
More
$52.95
- Compare At:
-
$63.01
- You Save:
-
$10.06