Kenmore Refrigerator 253.4438340B (2534438340B, 253 4438340B) Parts

The plastic bearing broke after 7 years of too much opening and closing. Removing original bears were not real easy, however installing new ones were quick. It works well. The parts arrived really quickly. Read more

I replaced the switch with a new one (exact match) from Appliance Parts Pros. Read more

Replacing the ice maker fixed the issue. Because the ice maker was redesigned. I needed a new ice cream shelf. If your current ice maker has a power switch that is vertical, you will need a new ice cream shelf to make it fit correctly. The repair was very easy. All I had to do is loosen two screws on the ice maker mount and slide it out. Then disconnect the connector and install the new ice maker. It was probably the easiest repair I have ever done. Read more

I ordered (3) new replacement blades and received them in two days! Read more

I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig. I'm sure to do business again for parts if needed. Read more

Ordered parts, watched videos and had it like new in five minutes! Read more

Shelving went in without a problem. Very simple. Checked the installation video anyway in case there was a trick to not breaking something. Learned that the nylon clips needed to be transferred and found one missing on another shelf, so ordered a replacement. The water valve was one I replaced some time ago but one of the solenoids was bad, confirmed with a meter (ohm reading is between 200-500; less than 200 or more than 500 is broken). Replaced it without a problem (becoming expert at... Read more

This was a simple replacement of the crisper drawer and humidity control sliding switch; easy to snap into place and align with the tracks. Read more

First, I will never, ever make the mistake of unscrewing anything on an appliance while it is still connected to power - what started as a cosmetic fix on the freezer door ended up costing me $340 to fix after I shorted out one of the boards for the dispenser. Replaced both the Ice dispenser power board and Ice dispenser control board. I tried to get information on how to test which of my boards had gone bad, since these are pricey parts, but could not find a reliable way to test. And since... Read more

My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more

I was able to view the video then order parts on Appliancepartspros.com. Initially, I received the wrong part but we were able to resolve the issue quickly and I fixed my issue in 10 minute with the right part. Read more

Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more