Kenmore Refrigerator 253.51622101 (25351622101, 253 51622101) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 241993001
The Rear Crisper Cover Support is an OEM part for Frigidaire refrigerators. It plays a key role in supporting the crisper cover, which is the shelf that holds the crisper drawers. This part ensures that the cover remains stable and level, providing reliable support for storing fresh produce and other items in the crisper drawers.
Symptoms of a bad Rear Crisper Cover Support include:
- The crisper cover sagging or failing to stay in place
- Difficulty sliding the crisper drawers in and out
- Noticeable instability or wobbling of the cover
- Cracks or breakage where the support attaches to the refrigerator wall
Causes of a bad Rear Crisper Cover Support can involve regular wear and tear, excessive weight placed on the crisper cover, or accidental damage during cleaning or handling.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken slide connections on shelf support replaced shelf support "cover" front and rear cover supports. Scott R. • Deephaven , MN • April 04, 2023
If you can't pull out the displacement pins on the crisper cover support clips that allow the wall to carry the weight of the cover, slides and drawer, you may need to push those pins in (they fall down the wall) to remove the clip. During the replacement of both front clips, I had one I could remove and one I had attempted to drill a tiny hole in to be able to pull the pin. Ultimately it did not work and needed to be simply pushed in. Do not worry, there is nothing below which the plastic...
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 240350649
The Crisper Glass Insert is an OEM part for Frigidaire refrigerators, designed to fit over the crisper drawers. This glass insert provides a sturdy and flat surface for storing fruits, vegetables, and other items in the refrigerator's crisper section, helping to maintain optimal humidity levels and keep produce fresh longer. The glass measures approximately 17.12 inches X 15.40 inches.
Symptoms of a failing Crisper Glass Insert include:
- Cracks or chips in the glass
- Difficulty fitting the glass properly due to damage
- Excessive scratching that obscures visibility
Causes of a bad Crisper Glass Insert can range from accidental damage, such as dropping heavy items on the glass, to normal wear and tear over time.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken glass shelf David M. • Astoria , NY • July 27, 2017
Manufacturer no longer makes part, but found rough equivalent by searching AppliancePartsPros.com web site. Not exact fit, but excellent substitution.
Simple replacement of shelf on existing bracket.
Read more
More
$90.60
- Compare At:
-
$108.72
- You Save:
-
$18.12
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308000010
The Evaporator Fan Blade is an OEM part for Frigidaire refrigerators, designed to circulate air over the refrigerator coils and through the food compartment. The fan blade works in conjunction with the evaporator fan motor, and together, they play a key role in the cooling process by distributing cool air evenly throughout the refrigerator and freezer.
Causes of a bad evaporator fan blade can include physical damage, such as cracks or bends in the blade itself, which can occur over time due to wear and tear or during cleaning and maintenance.
Symptoms of a bad Evaporator Fan Blade include:
- Unusual noises coming from the refrigerator, such as humming or buzzing
- The refrigerator or freezer compartment is not cooling adequately
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
1: loud noise on freezer side. 2: no water dispensing Matt M. • Pickett , WI • February 05, 2021
1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was.
2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived...
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Frigidaire part
By: Frigidaire
Part Number: wfcb
The Frigidaire PureSource Plus WFCB Refrigerator Water Filter is an OEM part for Frigidaire refrigerators. This water filter is specifically engineered to reduce impurities and contaminants in your drinking water and ice, including chlorine taste and odor, lead, cysts, and particulates.
Regular replacement of the water filter is recommended to maintain the best water quality and flow rate. Over time, the filter can become clogged with particles and contaminants, which can reduce its effectiveness and potentially affect the taste and odor of your water.
Symptoms of a filter that needs replacement include:
- Reduced water flow from the dispenser
- Unpleasant taste or odor in the water and ice
- The refrigerator's water filter indicator light turns on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Not dispensing water
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Needed filter replaced Adam L. • Canton , OH • March 15, 2014
Replaced filter
Read more
More
$55.66
- Compare At:
-
$66.24
- You Save:
-
$10.58
Genuine Frigidaire part
By: Frigidaire
Part Number: 241688401
The Ice Door Bracket is an OEM part for Frigidaire refrigerators. It is a critical component of the ice dispenser mechanism, designed to support and align the ice door properly. This bracket ensures the ice door opens and closes smoothly, maintaining an airtight seal to prevent warm air from entering the freezer compartment and causing frost buildup.
Symptoms of a bad Ice Door Bracket include:
- The ice dispenser door failing to close completely, which can lead to ice melting and freezer burn.
- Excessive frost or ice accumulation near the dispenser area.
- Unusual noise when the dispenser is activated, indicating misalignment or instability.
Causes of a bad ice door bracket can include mechanical stress from repeated use, accidental damage from impact, or wear and tear that weakens the structural integrity of the bracket.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice maker door not sealing causing frost buildup and leaking Richard B. • Shoreline , WA • October 11, 2016
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time.
Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical...
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 240342830
The Meat Pan is an OEM part for Frigidaire refrigerators, designed to offer a specialized storage solution within the fridge for meats and other perishables. This drawer helps to keep meats at the appropriate temperature, reducing the risk of spoilage and maintaining freshness longer.
Causes of a bad Meat Pan can include overloading it with too much weight, accidental damage from dropping or harsh handling, and the natural wear and tear that comes from regular use.
Symptoms of a bad Meat Pan include:
- Cracks or damage to the pan, which can lead to leaks or difficulties in keeping the contents properly chilled.
- Difficulty in sliding the pan in and out, possibly due to damage or warping.
- A noticeable decrease in the freshness of stored meats, which could be a sign that the pan is not maintaining the correct environment.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator was freezing food Devon L. • Lewisville , NC • June 11, 2016
Replaced the cold control. I have no experience working on appliances but went well. It took about 2 hours of work but I went slow and took pictures in case I needed to reference later. Saved $200 in labor by doing it myself.
Read more
More
$62.45
- Compare At:
-
$84.58
- You Save:
-
$22.13
Genuine Frigidaire part
By: Frigidaire
Part Number: 240365401
The Refrigerator Meat Pan Hanger is an OEM part for Frigidaire refrigerators. It supports the meat pan, allowing it to slide in and out smoothly for easy access to stored items. This hanger ensures the proper positioning and stability of the meat pan within the refrigerator.
Causes of a bad meat pan hanger can include wear and tear from frequent use, accidental impacts, or damage due to overloading the meat pan. A faulty hanger can lead to difficulties in sliding the pan and may affect the organization of the refrigerator.
Symptoms of a bad refrigerator meat pan hanger include:
- The meat pan not sliding smoothly or getting stuck
- Visible cracks or breaks in the hanger
- The meat pan tilting or becoming misaligned
- Difficulty in maintaining the position of the meat pan
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The meat/cheese drawer hangers were broken Jennifer G. • Plainfield , IL • March 20, 2015
I ordered new hangers and was able to install them within a period of 5 minutes. Super easy!
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Frigidaire part
By: Frigidaire
Part Number: 241688701
The Ice Door Seal is an OEM part for Frigidaire refrigerators. This seal is designed to create an airtight barrier around the ice dispenser door, preventing warm air from entering the freezer and maintaining optimal temperature inside the ice compartment. Please note, this listing is for the seal only, other components are sold separately.
Over time, the ice door seal can become worn out or damaged due to frequent use, exposure to varying temperatures, and regular opening and closing. Causes of a bad ice door seal include cracking, tearing, or loss of elasticity, which can lead to air leaks.
Symptoms of a bad ice door seal include:
- Frost or ice buildup around the ice dispenser
- Warm air entering the freezer compartment
- Increased energy consumption
- Water or condensation around the ice dispenser area
- The ice door not closing properly or sealing tightly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice maker door not sealing causing frost buildup and leaking Richard B. • Shoreline , WA • October 11, 2016
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time.
Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical...
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 240351207
The Lower Crisper Pan is an OEM part for Frigidaire refrigerators. It is designed to store fruits and vegetables at an optimal humidity level, keeping them fresh for a longer period. This pan fits into the lower section of the refrigerator and provides a dedicated space for produce, helping to organize and maximize the storage capacity of your fridge. The pan measures approximately 16.5" x 16.2" x 8".
You should replace the lower crisper pan if it becomes cracked, broken, or warped. Causes of a bad crisper pan can include regular wear and tear from frequent use, overloading with heavy items, or accidental damage from dropping or mishandling the pan.
Symptoms of a bad lower crisper pan include:
- Cracks or visible damage to the pan
- Difficulty sliding the pan in and out of its compartment
- Reduced ability to maintain proper humidity levels, leading to faster spoilage of produce
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Just needed a new drawer Robert B. • Evans Mills , NY • July 11, 2014
Just slide in it
Read more
More
$117.77
- Compare At:
-
$141.32
- You Save:
-
$23.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303918774
The Condenser Fan Motor Kit is an OEM part for Frigidaire refrigerators. This kit includes the motor and necessary components to replace the existing condenser fan motor in your appliance. It is responsible for circulating air through the condenser coils to dissipate heat outside the refrigerator, helping to maintain the internal temperature and keep the compressor cool.
Causes of damage to the condenser fan motor can include wear and tear over time, dust and debris buildup that obstructs fan movement or damages the motor, and electrical issues such as shorts or surges that can burn out the motor.
Symptoms of a bad Condenser Fan Motor include:
- The refrigerator overheating or not cooling efficiently
- Unusual noises coming from the back of the refrigerator
- The refrigerator cycling on and off more frequently or running longer than normal
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Frig compartment not cold, freezer seemed ok John M. • San Jose , CA • March 26, 2019
FIrst, I removed the cardboard cover on the back, exposing the compressor compartment. I noticed the fan was not moving. I touched the blade and it immediately started spinning, but not very fast. The compressor was getting hot, and I think prob. overheating. The fan stopped after a few hours and then "froze" solid the next day. I got the parts and I followed the process in the video to replace the fan. VIdeo was right on the money. but there were some difficulties. The retention clip on the...
Read more
More
$121.95
- Compare At:
-
$143.90
- You Save:
-
$21.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 241685101
The Ice Dispenser Drum is an OEM part for Frigidaire refrigerators. This component is essential for the proper dispensing of ice, rotating to move ice from the storage bin to the dispenser chute.
You should replace the ice dispenser drum if it becomes damaged or worn out. Causes of a bad ice dispenser drum can include physical damage from ice jams, wear and tear from regular use, or issues with the motor that drives the drum.
Symptoms of a bad ice dispenser drum include:
- The ice dispenser not dispensing ice properly
- Grinding or clicking noises from the dispenser area
- Ice getting stuck or jammed in the dispenser
- Reduced ice flow or inconsistent dispensing
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice dispenser no longer worked properly Alan H. • Birmingham , AL • June 14, 2015
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire...
Read more
More
$49.95
- Compare At:
-
$59.94
- You Save:
-
$9.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 240328201
The Door Hinge Bearing is an OEM part for Frigidaire refrigerators. It supports the refrigerator door, allowing it to open and close smoothly. This bearing ensures that the door remains properly aligned and operates without excessive friction, contributing to the overall longevity and functionality of the refrigerator.
Over time, door hinge bearings can wear out due to regular use, exposure to weight stress, or lack of lubrication. When the hinge bearing becomes faulty, the refrigerator door may become misaligned, difficult to open or close, or cause unusual noises.
Symptoms of a bad door hinge bearing include:
- The door sagging or becoming misaligned
- Difficulty opening or closing the door
- Unusual squeaking or grinding noises when the door moves
- The door not sealing properly, leading to temperature fluctuations inside the refrigerator
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Door won't open or close
-
Door sweating
-
Clicking sound
See more...
Do-It-Yourself Stories from Customers like You
The refrigerator door on my side by side was popping when opened at 90 degrees Oscar T. • Eureka Springs , AR • January 22, 2015
I went to Appliance Parts Pros and watched a few videos. Ordered the door closer plate and door hinge bearing. Removed all of the door bins and contents. Removed four screws total. Lifted the door off of the hinge, replace the two parts on the bottom hinge. Put the door back on the hinge with a little silicone on the new parts. Replaced all of the screws and no more popping. It took more time to clean all of the door bins than to fix the hinge. The video was 100% accurate. No surprises.
Read more
More
$14.72
- Compare At:
-
$17.37
- You Save:
-
$2.65
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303918277
The Replacement Icemaker is an OEM part for Frigidaire side-by-side refrigerators. It serves the critical function of automatically producing batches of ice cubes on demand. Note: The Icemaker Kit comes with an adaptor harness that may be needed for some applications. The harness converts a 4 pin connector to a 3 pin connector.
Causes of a malfunctioning icemaker can vary. They may stem from failed control sensors affecting conductivity and freeze times, scaled or corroded water lines, or an ice basket mold with broken fins and louvers.
Symptoms of a bad icemaker include:
- Reduced or inconsistent ice production
- Ice cubes getting jammed or fused together
- Water leaks or spray inside the freezer
- Strange sounds or mechanisms not working
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Ice maker won't dispense ice
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Our 21 year old frigidaire refrigerator refused to make ice. Lindsey M. • Burlington , KY • August 31, 2018
After about three months of returning to my youth, filling ice cube trays, I decided to venture into the freezer and yank the old ice maker from its mounting. Since this was the third time this very ice maker had decided to stop functioning, it was time to get a replacement. I suspected the heating element was open and the motor was screaming trying to push the little frozen blocks of ice from their form, with distortion occurring. I ordered a replacement from this very company, received it...
Read more
More
$65.95
- Compare At:
-
$144.53
- You Save:
-
$78.58
Genuine Frigidaire part
By: Frigidaire
Part Number: 240457701
The Door Closer Plate is an OEM part for Frigidaire refrigerators. It helps ensure that the refrigerator door closes smoothly and securely, preventing air leaks that can compromise the appliance's efficiency and cooling performance.
The door closer plate may need to be replaced if it becomes worn out or damaged. Causes of a bad door closer plate can include frequent use, misalignment, or physical damage from accidental impacts.
Symptoms of a bad door closer plate include:
- The refrigerator door not closing properly or staying ajar
- Increased energy consumption due to air leaks
- Unusual noises when opening or closing the door
- The door feeling loose or misaligned
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
This part fixes the following symptoms
-
Door sweating
-
Door won't open or close
See more...
Do-It-Yourself Stories from Customers like You
Popping noise when door opened and closed Rod O. • Fort Myers , FL • February 09, 2015
Replaced the lower hinge bearing and lower door cam on fridge side.
Read more
More
$54.69
- Compare At:
-
$65.08
- You Save:
-
$10.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 241885001
The Ice Crusher Housing is an OEM part for Frigidaire refrigerators. This housing encloses the ice crusher assembly, ensuring that ice is crushed efficiently and delivered smoothly through the dispenser. It is designed to securely hold the crusher components in place and guide the ice into the dispenser chute.
You should replace the ice crusher housing if it becomes damaged or worn out. Causes of a bad ice crusher housing can include repeated impact from ice, cracks or breaks from overloading, or wear and tear from regular use.
Symptoms of a bad ice crusher housing include:
- Ice not crushing properly
- Leaks or moisture around the ice crusher area
- Loud or unusual noises during operation
- Visible cracks or damage to the housing
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Ice maker dispenses too much ice
See more...
Do-It-Yourself Stories from Customers like You
The flap inside the housing broke and I wasn't getting crushed ice Jasper C. • Danville , VA • March 12, 2014
Replaced the housing
Read more
More
$58.60
- Compare At:
-
$69.73
- You Save:
-
$11.13