Kenmore Refrigerator 253.71114101 (25371114101, 253 71114101) Parts

Ordered part from your website. Fit perfectly Read more

I removed the meat drawer and shelving unit. I unscrewed the Philips head screws on either side of the shelf brackets. I cleaned the old surfaces and fitted the new plastic hangers in place. I screwed the new hangers in place with the screws I had from the old ones. It was very easy, except the holes in the plastic hanger are not quiet big enough for the screws. I had to push very hard with the screwdriver, and started to strip the head of the screw as well at the screwdriver itself. I did... Read more

This was a 2000 model so rather than just replace the defrost timer which was visibly burnt on the terminals, we just did everything. The cold control, defrost timer, thermostat, defrost heater and the compressor capacitor were all replaced. I had the same issue on my older unit and tore it apart replacing one item at a time over a three month period so on an older one i suggest do it all while it is apart. Read more

Replaced two crisper drawers and a door shelf. The person who took my order was helpful and thorough in determining what I needed. The company was equally helpful when I needed to return some parts that I ordered which I turned out to not need. Read more

The bar retainers just snapped in and the door handle can be replaced with three screws. Took about 5 minutes total. Read more

Removed and replaced the gasket. Read more

Put racks to together and put into fridge Read more

Put racks to together and put into fridge Read more

FIrst, I removed the cardboard cover on the back, exposing the compressor compartment. I noticed the fan was not moving. I touched the blade and it immediately started spinning, but not very fast. The compressor was getting hot, and I think prob. overheating. The fan stopped after a few hours and then "froze" solid the next day. I got the parts and I followed the process in the video to replace the fan. VIdeo was right on the money. but there were some difficulties. The retention clip on the... Read more

• Ice maker won't dispense ice
• Ice maker not making ice
• Leaking

After about three months of returning to my youth, filling ice cube trays, I decided to venture into the freezer and yank the old ice maker from its mounting. Since this was the third time this very ice maker had decided to stop functioning, it was time to get a replacement. I suspected the heating element was open and the motor was screaming trying to push the little frozen blocks of ice from their form, with distortion occurring. I ordered a replacement from this very company, received it... Read more

• Door won't open or close

I put a piece of two-by-four, (2"x4") about 10-inches long on edge under the door to support the door. I removed the 3-bolts attaching the door hinge at the bottom corner. I then slid the washer onto the post and placed the bracket back in place with the 3-bolts. That did the trick. I used a 3/8-inch socket with extension and a ratchet. Read more

• Door won't open or close

My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more

No problem, 1 min to fix Read more

No problem, 1 min to fix Read more

My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more

• Leaking

Changed the Frigidaire Icemaker Fill Tube Part # 241796405 (AP5671747) about a week ago and so far the Frigidaire Refrigerator seems to work fine. Did not use other ordered parts. Recently ice formed around internal evaporator fan and it started making loud noise when then fan and compressor, etc were running. A long winded history noted below if interested: I have been fighting with this Frigidaire Refrigerator for about 3 to 4 years, started out with the evaporator fan making noise when ice... Read more