Kenmore Range 362.73288891 (36273288891, 362 73288891) Parts
Genuine Ge part
By: Ge
Part Number: WB13K21
The Oven Igniter is an OEM replacement part for GE ovens, designed to ignite the bake igniter to start the heating process. This part is responsible for creating the spark that ignites the gas, providing the heat needed to cook and bake food. Over time, the oven igniter can wear out or become damaged, which can prevent the oven from heating.
Symptoms of a bad Oven Igniter include:
- The oven not heating up at all.
- The oven taking longer than normal to heat.
- Gas smell in the oven due to gas being released without ignition.
- A clicking sound without the oven igniting.
Causes of a bad igniter can include normal wear and tear over time, exposure to excessive heat or moisture, or physical damage from impact or mishandling.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
IMPORTANT: The connector plug may need to be cut off and igniter wires connected to range wires using porcelain wire connectors.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Little to no heat when baking
-
Gas igniter glows, but will not light
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Oven burner would not light broiler burner would light Michael C. • Austin , TX • January 25, 2015
If the oven burner would not light but the broiler would this indicated that the safety valve is OK. Problem had to be with the igniter. Removed the bottom panel in the oven and restarted the oven. The igniter would not glow at all. It should be brilliant red.
This is where the problem came in. I could not find the location of the model on the Kenmore range anywhere you would normally look - the back, the wiring envelope, the oven door jamb etc. Also the igniter cannot be removed from...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB48T10095
Replacement oven rack for electric and gas ranges. Installs inside oven cavity. Needed when original rack is missing, damaged, or warped from use.
Do-It-Yourself Stories from Customers like You
Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014
Orded rack by stove model number. fit perfect
Read more
More
Genuine Ge part
By: Ge
Part Number: WB16K10035
Fix an oven that won't heat, takes too long to preheat, or makes a whoosh sound when lighting. This bake burner assembly includes the igniter. DIY repair.
Do-It-Yourself Stories from Customers like You
Gas oven taking very long time to preheat Michael P. • Bend , OR • July 30, 2016
Found a hole in the burner tube next to the igniter. Replaced both igniter and burner. Very easy repair. Works great now.
Read more
More
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
Genuine Ge part
By: Ge
Part Number: WB16K10026
The Double Burner Kit is an OEM part for GE gas ranges. This kit includes the necessary components to replace the double burner, which is crucial for efficient cooking on GE gas stoves. The double burner provides two separate flame sources, allowing for versatile cooking options with different heat levels.
Causes of a bad double burner can include normal wear and tear, clogs from food debris, exposure to high temperatures, or physical damage. These issues can hinder the burner's performance and safety.
Symptoms of a bad double burner include:
- Uneven or weak flames
- One or both burners not igniting
- Difficulty in adjusting the flame size
- Noticeable gas odor when the burner is off
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015
Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1X1293
Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.
Do-It-Yourself Stories from Customers like You
Failure to hold temperature after preheating. Michael D. • Wilmington , DE • January 07, 2023
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza!
Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days.
I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB18X26988
Burner won't light when you turn the knob? This spark electrode creates the electric arc that ignites your gas burner. Straightforward DIY repair.
Do-It-Yourself Stories from Customers like You
Igniter Rob S. • Maple Valley , WA • October 08, 2017
Replaced
Read more
More
Genuine Ge part
By: Ge
Part Number: WB07K10232
Black trim piece that installs at the bottom edge of your range oven door. Replace if cracked, rusted, broken, or missing to restore appearance.
Do-It-Yourself Stories from Customers like You
The front door glass of my ge xl44 gas range was shattered by a flying crockpot Kurt N. • South Williamsport , PA • May 10, 2017
I lifted up the door and removed it.
Next, I laid out newspaper on the floor.
I placed the door on the newspaper upside down.
With my socket driver, I removed the bottom door trim.
I then used a pocket knife to remove the remaining glass in the top groove.
I then slid in the new glass and reinstalled the trim.
It took 30 minutes to replace the glass and clean up the glass
fragments from the previous door glass.
I looked up a video on how to replace it Utube.
Personal safety equipment - Safety...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB19K10055
Reduces and stabilizes gas supply pressure to your range manifold. Replace if cracked, leaking, or damaged to restore safe, consistent gas flow to burners.
Do-It-Yourself Stories from Customers like You
Small gas leak from stove Debbi V. • Pearland , TX • May 28, 2016
I replaced the regulator valve.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1X536
This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.
Do-It-Yourself Stories from Customers like You
Broken front glass door Roni T. • Sayreville , NJ • February 12, 2019
I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB20K5037
If your gas range burners won't ignite or click constantly, this spark module generates the high-voltage pulses needed to light the burners reliably.
Do-It-Yourself Stories from Customers like You
Burners would not lite Larry S. • Elkhart , IN • March 27, 2017
Replaced the spark module (2 + 0) Now it is working fine.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10065
Size: 10-32 GXTT FLP.595 S
Do-It-Yourself Stories from Customers like You
Broken shelf fixed fast! Liza B. • Concord , NC • May 06, 2019
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes.
Thanks so much!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB19K36
Oven won't heat or ignite? A faulty gas control valve prevents gas flow to the burner. Moderate DIY repair restores reliable baking in 1-2 hours.
Do-It-Yourself Stories from Customers like You
My broiler would light but my oven would not George H. • Spicewood , TX • January 10, 2015
I found I could "rap" on my broiler/oven control valve and the oven would light, so I ordered a new control valve. Installing valve was not difficult except for having to lay on the floor and work in a small space. After installation, the oven lit only ONE time...and the boiler/oven problem was unchanged....broiler would light, but not oven. (Both incandescent pilots would glow brightly, so I did not suspect the igniter/pilot.)
A friend suggested I swap ignitors anyway...and indeed, the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1K5062
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
Do-It-Yourself Stories from Customers like You
Cooktop needed aesthetic overhaul. Barbara B. • Wyncote , PA • March 26, 2020
I replaced damaged burner bowls (drip pans), now my cooktop looks like new!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1X5364
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.
More
Genuine Ge part
By: Ge
Part Number: WB28K10033
Natural gas orifice spud for gas range burners. Installs in the burner assembly to regulate gas flow. Replace if cracked, stripped, or missing.
Do-It-Yourself Stories from Customers like You
The range was set up for propane and my friend wanted to use it with natural gas Wells C. • Hereford , AZ • June 09, 2014
I ordered the parts from Appliance Parts Pros and was served by a very friendly and knowledgeable sales agent. She not only did the research tyo find the correct part from my model number but added some advice on converting the regulator to natural gas so the oven would operate properly. The parts arrived on time and the conversion took about 15 minutes. Thanks Appliance Parts Pros. I am looking forward to doing business with you in the future.
Read more
More