Kenmore Range 363.9344190 (3639344190, 363 9344190) Parts
Genuine Ge part
By: Ge
Part Number: WB44K5012
The Oven Bake Element is an OEM part for GE ovens. This element is located at the bottom of the oven and is primarily responsible for providing the heat necessary for baking. When the oven is turned on, electricity flows through the element, causing it to heat up and glow red-hot. This bake element has ¼” push-on wire terminals. If you are unable to use your old wire connectors, order TJMA02875-1.
Symptoms of a failing oven bake element include:
- Oven not heating up properly or taking longer to heat
- Uneven cooking or baking
- Element not glowing or only partially glowing during operation
- Visible signs of blistering, cracks, or holes on the element
Causes of oven bake element failure typically include general wear and tear from regular use, exposure to high temperatures which can weaken the element over time, or electrical issues such as short circuits.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Oven is too hot
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Element burn into Richard D. • Summerville , GA • April 02, 2014
Took out old element,got part number and look for the cheapest price online, Appliance Parts Pro could not be beat... order part be number, easy to match, came in fast and put in element, only needed a 5/16 nutdriver to take it out and put it in,unpluged wires and bent just a little to keep one on left and one right from getting mixed up and pluged up new element and ran in the 2 screws,easy job, dont get no easier.. Thanks again Appliance Parts Pro
Read more
More
$61.64
- Compare At:
-
$73.97
- You Save:
-
$12.33
Genuine Ge part
By: Ge
Part Number: WB2X9719
The Support Bracket is an OEM part for GE ovens, designed to provide stability and support for the broiling element. This bracket is essential for ensuring the broiling element is securely positioned at the top of the oven, allowing for even heat distribution and optimal cooking performance when broiling foods.
Causes of damage to the support bracket often involve high heat exposure, accidental impacts during cleaning or cooking, or general wear and tear over time.
Symptoms of a bad Support Bracket include:
- The broiling element hanging lower than usual or touching the oven cavity, which can affect cooking performance and potentially damage the oven's interior.
- Unstable or loose broiling element, leading to uneven cooking or broiling.
- Visible signs of wear, damage, or corrosion on the bracket itself, indicating it may no longer provide adequate support.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014
Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds.
Read more
More
$10.00
- Compare At:
-
$10.43
- You Save:
-
$0.43
Genuine Ge part
By: Ge
Part Number: WB48X10056
The Broiler Pan Kit is an OEM part for GE ranges. It serves as a secure platform for positioning meats, vegetables, and various foods directly beneath the broiler element, ensuring safe and efficient cooking. The pan is about 17 inches wide by 13 inches deep.
Over time, wear and tear can affect broiler pans, causing issues such as flaking or stripping of the non-stick coating and the development of small ridges or holes that permit grease to drip down.
Symptoms of bad broiler pans include:
- Grease fires caused by dripping grease contacting the heating element
- A burnt or smoky flavor transferring to foods
- Difficulty removing baked-on grease and food deposits
- Pans that are misshapen or developing small cracks
This OEM GE replacement part is also compatible with select Hotpoint, RCA, and some Kenmore ranges
Do-It-Yourself Stories from Customers like You
None Ralph W. • Brentwoo , NY • July 13, 2014
Fast delivery, great service
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Ge part
By: Ge
Part Number: WB44X232
The Broil Element is an OEM part for GE ovens. It provides the necessary heat for broiling by producing high-intensity radiant heat from the top of the oven, allowing for cooking and browning foods.
Causes of a bad broil element can include repeated high-heat exposure, physical damage from cleaning or food spills, and electrical surges.
Symptoms of a bad broil element include:
- Inconsistent or no heat during the broiling cycle
- Visible signs of damage, such as blisters or breaks in the element
- Sparking or unusual noises when the broil function is engaged
- Uneven cooking or browning of food
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Oven broil element was broken in half after self cleaning cycle Charles R. • Charlotte , NC • January 24, 2015
I needed to replace the oven broil element on my 15 year old GE range/oven unit. The broil element was broken in half during an oven self-cleaning cycle. Due to the age of the oven, I decided to replace both the broil and bake elements. I ordered the elements from Appliance Parts Pro. Their web site made it very easy to identify and locate the correct replacement parts. The parts arrived in 2 days. I watched the repair demo videos available for each element. Although the oven used in the demo...
Read more
More
$72.95
- Compare At:
-
$87.54
- You Save:
-
$14.59
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WB1X1293
The Igniter Mounting Screw is an OEM replacement part for GE ovens and ranges. This screw secures the igniter to the burner assembly, ensuring it remains firmly in place for consistent and reliable ignition. Its precise fit and durable design help maintain the stability and functionality of the igniter.
Over time, mounting screws can become corroded, stripped, or lost during repairs or maintenance. A missing or damaged screw may result in a loose igniter, affecting the appliance's ability to ignite properly.
Symptoms of a bad or missing igniter mounting screw include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Failure to hold temperature after preheating. Michael D. • Wilmington , DE • January 07, 2023
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza!
Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days.
I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I...
Read more
More
$11.34
- Compare At:
-
$13.49
- You Save:
-
$2.15
Genuine Ge part
By: Ge
Part Number: WB14X104
The Right Door Hinge is an OEM part for GE ovens and allows the oven door opens and closes smoothly and securely. The hinge facilitates easy access to the oven's interior, contributing to a user-friendly cooking experience.
Over time, the right door hinge can wear out or become damaged due to frequent use and the constant stress of holding the door's weight. Causes of a bad hinge include metal fatigue, rust, and physical impact.
Symptoms of a malfunctioning Right Door Hinge include:
- The oven door feels loose or wobbly when opened or closed.
- Difficulty in fully closing the oven door, which may affect the oven's ability to maintain temperature.
- A noticeable squeaking or grinding noise during the door's operation.
- Visible wear or damage to the hinge itself.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The left oven door hinge was siezing door would not open fully Tom J. • Powder Springs , GA • November 19, 2014
I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the...
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Ge part
By: Ge
Part Number: WB14X103
The Hinge, Left Side is an OEM part for GE ovens. It provides support and allows for the smooth operation of the oven door, ensuring it opens and closes properly.
Causes of a bad hinge can include wear and tear over time, rust or corrosion due to exposure to heat and moisture, and damage from accidental impact or improper handling.
Symptoms of a bad hinge, left side include:
- Difficulty in opening or closing the oven door
- Oven door not staying securely closed
- Door misalignment
- Squeaking or creaking noises when moving the door
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The left oven door hinge was siezing door would not open fully Tom J. • Powder Springs , GA • November 19, 2014
I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the...
Read more
More
$50.26
- Compare At:
-
$59.31
- You Save:
-
$9.05
Genuine Ge part
By: Ge
Part Number: WB17X210
The Range Terminal Block Kit is an OEM replacement part for GE electric ranges. It contains screw terminals that connect internal wiring throughout the range. The terminal block facilitates safe and reliable power transfer between critical components such as the control panel, heating elements, timers, and temperature sensors.
Causes of a faulty terminal block can include normal wear over time loosening wire connections, water exposure leading to corrosion, or physical damage from force or impact.
Symptoms of a bad terminal block include:
- Intermittent or complete failure of bake, broil, or surface heating elements
- Fault codes or error messages related to electrical malfunctions
- Loose, frayed, or broken wire connections inside the range
- Components like the control panel or timers not operating correctly
This OEM GE part also fits Hotpoint, RCA, and Kenmore electric ranges.
Do-It-Yourself Stories from Customers like You
The terminal block on my stove burned out Michael Y. • Fredericksburg , VA • November 28, 2014
Ordered a new terminal block kit from Appliance Parts Pros. Shipping was lightening fast. Slapped the new part on my stove and its never worked better. Thanksgiving was saved! I'd replace the rest of my stove's terminal blocks if they weren't $50 a piece...sheesh!
Read more
More
$65.95
- Compare At:
-
$78.48
- You Save:
-
$12.53
Genuine Ge part
By: Ge
Part Number: WB23K5027
The Infinite Switch is an OEM replacement part for GE ranges. This switch controls the operation of the large heating elements on the cooktop. The element switch is responsible for regulating power delivery to the various heating elements based on temperature and function settings. It allows for precise heating control to maintain optimal cooking temperatures. Over time, element switches can wear down from repeated use and heat exposure.
Causes of a bad switch include burned-out or loose internal connections, damaged terminals, or defects in the electronic components.
Symptoms of a bad element switch include:
- Inability to turn elements on or off
- Elements not heating properly or unexpectedly shutting off
- Inconsistent or fluctuating oven or surface temperatures
- Electronic display or control issues
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Heat plate shorted and blew switch Joseph B. • Hillsdale , NJ • September 29, 2014
Swapped old with new. dead easy and fast delivery of part helped:
good service, thank you .
Read more
More
$99.26
- Compare At:
-
$118.12
- You Save:
-
$18.86
Genuine Ge part
By: Ge
Part Number: WB23M24
6" element switch
Do-It-Yourself Stories from Customers like You
The burner would not stay at the temperature you wanted. It would go to high eventually. Ronald S. • Columbia , SC • February 05, 2022
Talked to a representative at your company they said it was probably the infinite switch.
I purchased all four switches, replaced all four burner switches. Very easy to do. In less than an hour to replace all four.
Read more
More
$98.95
- Compare At:
-
$118.74
- You Save:
-
$19.79
Genuine Ge part
By: Ge
Part Number: WB1M1
ST10-16 X 7/16"
Do-It-Yourself Stories from Customers like You
Bottom heating element not working on a ge electric range David K. • Portsmouth , RI • December 21, 2014
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy.
Read more
More
$7.65
- Compare At:
-
$9.18
- You Save:
-
$1.53
Genuine Ge part
By: Ge
Part Number: WB30X255
This 8-inch surface burner element is the plug-in coil used on many electric ranges. Replacing a worn or failed element restores reliable heating and more even cooking performance on your stovetop.
- Provides heat to pots and pans when energized by the surface control
- Common fix for an element that won't heat or only heats partially
- Addresses visible coil damage such as breaks, blisters, or burned spots
- Corrects intermittent heating caused by an open or failing element
What's included: One 8-inch plug-in surface coil element. Install notes:
- Disconnect power to the range/unplug before servicing and ensure the element is cool
- Lift the old coil slightly, then pull straight out from the receptacle
- Inspect the receptacle/terminal block and drip bowl; replace if overheated or damaged
- Fully insert the new element terminals into the receptacle, seat the coil level, and test
Do-It-Yourself Stories from Customers like You
Burners and knobs missing or not working properly Barbara H. • Batesville , AR • February 16, 2015
The burners and drip pans that I previously ordered fit this stove perfectly. It is so much better cooking on the cook stove with the burners laying properly. I'm very pleased. My only complaint is that I wish more parts were available for this old stove, I really love it!
Read more
More
$52.48
- Compare At:
-
$71.62
- You Save:
-
$19.14
Genuine Ge part
By: Ge
Part Number: WB30X256
This 6-inch surface element restores steady, even heat to the small burner on your electric range. Replace a burned-out coil to get back to reliable boiling, simmering, and everyday cooking performance.
- Converts electrical power into heat at the 6-inch burner position
- Helps when the small surface burner won't heat or heats unevenly
- Common signs include visible hot spots, blistering, or burned/loose terminals
- Seats in the drip bowl and connects to the proper surface element receptacle
What's included: 1 6-inch surface element Install notes:
- Disconnect power at the breaker or unplug the range; allow the element to cool before servicing
- Lift the old element from the drip bowl and pull straight out from the receptacle; avoid twisting or bending the coil
- Inspect the element receptacle for heat damage; replace the receptacle if contacts are burned or loose
- Fully seat the new element and ensure it sits level in the drip bowl before use
Do-It-Yourself Stories from Customers like You
Needed to replace range elements and pans. Thomas N. • Lawrenceville , VA • January 11, 2020
Just took out old elements and then old pans. Replaced all 4 pans followed by 4 elements. Had to adjust element leads to get a secure level fit. Looked like a new range top when completed. The job was completed in less than 15 minutes.
Read more
More
$64.78
- Compare At:
-
$76.44
- You Save:
-
$11.66
Genuine Ge part
By: Ge
Part Number: WB1X1130
This replacement screw secures appliance components so panels, brackets, and assemblies stay tight and aligned. Replace stripped or missing hardware to eliminate rattles and keep your unit assembled safely and correctly.
- Fastens panels, brackets, or components to the appliance frame
- Restores a secure fit when the original screw is lost, stripped, or corroded
- Helps prevent vibration noise and movement during operation
- Supports proper alignment of trim and assemblies
What's included: One replacement screw Install notes:
- Disconnect power; for gas units, also shut off the gas supply
- Use the correct driver to avoid stripping the head; do not overtighten
- Inspect and address damaged mating threads, clips, or brackets before reinstalling
- Refer to your model's parts diagram to confirm location and quantity
Do-It-Yourself Stories from Customers like You
Broken door hinge on a ge wall mount double oven Cheryl A. • Mckinney , TX • June 18, 2018
We replaced the broken door hinge.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB25T10042
This part is the lens for a small appliance light on select GE cooking products. It covers and diffuses the lamp, protecting the opening and restoring a clean, finished appearance so status illumination is easy to see.
- Covers and diffuses a panel/indicator light so it's visible without glare
- Helps shield the lamp cavity from grease, moisture, and debris
- Restores proper appearance if the original lens is cracked, missing, or discolored
- Common symptoms: missing or broken lens, cloudy/yellowed lens, exposed indicator lamp
What's included: Lens Install notes:
- Disconnect power to the appliance before servicing
- Access the lens from the rear of the panel or mounting area; release retaining tabs or hardware
- Seat the new lens fully and align any tabs before securing
- Restore power and verify the indicator light shines through clearly
Do-It-Yourself Stories from Customers like You
Indicator light stopped working Elizabeth C. • Olympia , WA • January 28, 2026
Super easy with your parts and directions
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43