Kenmore Refrigerator 363.9537850 (3639537850, 363 9537850) Parts

Genuine Ge part

Switch

By: Ge

Part Number: WR29X5171

Do-It-Yourself Stories from Customers like You Icemaker would not stop making ice Henry T. • Huntersville , NC • November 23, 2014

Determined from the schematic on the inside of the cover of the icemaker that the likely problem was the "stop" micro switch.... Took the whole thing apart and confirmed the switch was defective. Replaced it with a standard DPDT switch - for a temporary fix. Went on line to find replacement. Bought it from APP Parts Pros. replaced DPDT switch with micro.. all is well.... saved at least $150 by not having a repair person come to the house - felling good about this..... Read more

Genuine Ge part

Ice Auger Blade

5.0 (2)

By: Ge

Part Number: WR2X7783

This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.

Do-It-Yourself Stories from Customers like You Ice crusher repair GE Monogram counter depth. Glenn J. • El Cajon , CA • July 27, 2020

This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful. The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger). Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost). The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot. Read more

Genuine Ge part

Support Bumper

By: Ge

Part Number: WR2X8989

Genuine Ge part

Cold Control

By: Ge

Part Number: WR9X499

Genuine Ge part

Tube Drain

5.0 (1)

By: Ge

Part Number: WR02X10395

Do-It-Yourself Stories from Customers like You Water valve and defrost drain tube were bad. Richard W. • Jacksonville , FL • June 24, 2017

Replaced them both. Read more

Genuine Ge part

Relay

5.0 (5)

By: Ge

Part Number: WR07X10011

Do-It-Yourself Stories from Customers like You Fridge and freezer was warm could hear a clicking sound every few minutes but the compressor wasn't running Chris K. • St. Joseph , MN • November 29, 2014

I took off the cover on the back of the fridge. Then took the small cover off the side of the compressor. Pulled off the relay and shook it and you could hear parts rattling inside. Ordered a repalcement and it's been working since. Read more

Genuine Ge part

Gskt Cover

By: Ge

Part Number: WR14X406

Genuine Ge part

Gasket Foam

By: Ge

Part Number: WR14X462

Genuine Ge part

Ice Deflector

5.0 (7)

By: Ge

Part Number: WR17X10282

Color: Black.

Do-It-Yourself Stories from Customers like You Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017

The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and... Read more

Genuine Ge part

Cover Bucket

By: Ge

Part Number: WR17X10340

Genuine Ge part

Recess Dispenser

By: Ge

Part Number: WR17X10514

Genuine Ge part

Ice Dispenser Rod

By: Ge

Part Number: WR17X2060

Genuine Ge part

Light Shield

By: Ge

Part Number: WR17X2555

Genuine Ge part

Dispenser Auger

4.6 (12)

By: Ge

Part Number: WR17X2740

Includes ice auger blade. For blade separately use WR2X7783. Please note Due to manufacturer changes they no longer make the auger as shown (helix coil approx 7 1/2") in the photo. The replacement helix coil is now approx. 5". If you have the original as shown in the photo you must order the complete auger/bucket assembly.

Do-It-Yourself Stories from Customers like You The problem was the auger was rusted and it came out on the ice Marie L. • Central Square , NY • August 04, 2017

Ordered new auger and installed it and now we have clean ice for our drinks. Read more