Kenmore Washer 417.48112700 (41748112700, 417 48112700) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
- Fastens the drum baffle/lifter (vane) to the rotating drum
- Helps maintain proper tumble and load turnover
- Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
- Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
- Disconnect power before servicing; shut off gas
- Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
- Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
- Start all screws before final tightening to seat the baffle evenly
Do-It-Yourself Stories from Customers like You
The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 137043000
Washer won't spin or makes loud whining noise? The drive motor powers drum rotation. Moderately difficult repair, takes 30-60 minutes. Video guide available.
Do-It-Yourself Stories from Customers like You
Motor was turning slow and after few minutes it quit. Leo H. • Slayton , MN • May 31, 2017
I watched videos on the website and took it apart. Put new motor on, also I put new belt even though the original belt was still ok, but I saw a little sign of shredding ...and there! !! It works like brand new washing machine. . Thanks to appliancepartspros.com...It made save a lot of money by doing it myself..
Read more
More
$293.95
- Compare At:
-
$349.80
- You Save:
-
$55.85
Genuine Frigidaire part
By: Frigidaire
Part Number: 134866600
Fix a washer that won't fill, overfills, or leaks when idle by replacing the water inlet valve. Most DIYers complete this repair in 15-60 minutes.
Do-It-Yourself Stories from Customers like You
Washing machine F8 E1 error code Michael R. • Brooklyn , NY • June 02, 2018
The error code indicated the washer wasn't getting any water, although the basket was filling to an unusually high level. After checking the inlet hoses and their connections but without opening the top cover to see the actual water level pressure switch, I went ahead and ordered the part. After receiving the switch, I opened the cover and found the original switch had fallen off it's mounting (for who-knows how long ago) and was resting against the drum. Over time, the movement of the drum...
Read more
More
$100.78
- Compare At:
-
$118.92
- You Save:
-
$18.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 134412600
This replacement door handle restores a secure, comfortable grip on your front-load washer door. Swap out a cracked or missing handle to open and close the door smoothly and keep laundry moving without hassle.
- Provides the handhold needed to open and close the washer door
- Replaces handles that are cracked, broken, or loose
- Helps when the door is difficult to open because the handle is damaged
- Restores the appliance's finished appearance
What's included: 1 door handle Install notes:
- Disconnect power before servicing.
- Work with the door supported on a flat surface for easier reassembly.
- Remove screws to separate the door halves, replace the handle, and reassemble.
- Tighten fasteners snugly and verify the door opens and latches properly.
Do-It-Yourself Stories from Customers like You
Broken dryer handle Michael P. • Reston , VA • March 01, 2021
Replaced with screwdriver.
Read more
More
$68.30
- Compare At:
-
$80.59
- You Save:
-
$12.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 134737300
Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Leaking hose. Sherry W. • Auburndale , FL • December 02, 2017
New hose and clamp.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 134509600
Washer drum baffle mounts inside the tub to lift and tumble laundry. Replace if cracked, broken, or missing to prevent snags and restore quiet operation.
Do-It-Yourself Stories from Customers like You
Needed to replace drum baffle on washer Tim L. • Marinette , WI • February 22, 2015
Removed old baffle. Had to cut it out with a multi-purpose tool. Replaced with new one. Job was not too bad, and only took about 15-20 minutes.
The best part was the fast delivery time for the part. Ordered the PM of one day, and had it in the early morning of the next day. (OUTSTANDING!!!)
Read more
More
$109.59
- Compare At:
-
$130.41
- You Save:
-
$20.82
Genuine Frigidaire part
By: Frigidaire
Part Number: 134596200
Shipping bolt kit secures washer tub and suspension during transport. Install before moving to prevent internal damage, then remove before use.
Do-It-Yourself Stories from Customers like You
Needed a shipping support kit to prep for move of front load washer James R. • Saint Louis , MO • September 15, 2014
Ordered a shipping support kit from AppliancePartsPro.com, got it shipped next day, and installed the kit in less than 5 minutes to prep front loading washer for immediate moving.
Read more
More
$107.95
- Compare At:
-
$129.54
- You Save:
-
$21.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 131205300
This replacement screw secures appliance panels and components. With a #10-16 thread and 0.75-inch length, it replaces stripped, rusted, or missing hardware to restore a tight, rattle-free fit and reduce vibration and noise.
- Fastens cabinet panels, brackets, or internal parts in washers and dryers
- Direct replacement for worn or lost screws to keep assemblies aligned and secure
- Helps address loose/vibrating panels, rattling noises, or visible gaps/misalignment
- Spec: #10-16 thread; 0.75-inch length
What's included: 1 screw (10-16 x 0.75 in) Install notes:
- Disconnect power; for washers, also shut off water supply
- Match the original screw location; start threads by hand to prevent cross-threading
- Use a driver that fits the screw head properly; tighten snugly without overtightening
Do-It-Yourself Stories from Customers like You
Machine was full of water and wouldn't pump it out Michael Q. • Richmond , IN • November 11, 2017
Googled the problem, watched videos on Youtube. Took apart machine and tried cleaning filter most people said was the problem. Wasn't anything but a penny in it so that wasn't the problem. I decided the pump must be bad ,the spring for the bellows and the console were broken so I bought those as well. Got the parts put them on and machine filled up with water turned over a few times and then stopped. The only thing else it could be is the fill level sensor or the main circuit board. Ordered...
Read more
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Genuine Frigidaire part
By: Frigidaire
Part Number: 134321702
This access panel service cover replaces a damaged or missing cover to protect internal components and give technicians safe access for diagnostics and repairs. It restores a finished appearance while preventing dust and debris from entering service areas. What it does:
- Covers and protects internal components, wiring and controls from dust and damage.
- Provides a removable service access point for diagnostics and repairs.
- Common symptoms: cracked, bent, loose or missing panel; exposed components; rattling or drafts near the service area.
- Replacement helps restore safety, reduce drafts and eliminate noise caused by a loose or damaged panel.
What's included: Includes one access panel. Install notes:
- Disconnect power (and water if applicable) before removing or installing the panel.
- Wear gloves to protect hands from sharp sheet-metal edges.
- Reuse existing screws or mounting clips when possible; basic hand tools typically required.
Do-It-Yourself Stories from Customers like You
The front panel was broke due to pulling on it and not sliding the handle the front clamp rusted in two the bottom panel was rusted and the door boot seal looked terrible Daren R. • Garden City , GA • January 19, 2015
Watched the video a few times for door boot seal replacement. It was a lot of help! The spring is the hardest to replace and I did enlist the help of my wife. Everything went back on great. If you have to replace the front panel (with the buttons) be mindful that the buttons are spring loaded and will come out. I did not lose any and it went back together just fine. A little touch up paint on the washer and it all looks brand new and works great. And the parts came in quicker than...
Read more
More
$95.24
- Compare At:
-
$113.34
- You Save:
-
$18.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 134408400
Replacement mounting screw for washers and laundry centers. Secures components like pulleys, brackets, and panels. Replace if missing, stripped, or damaged.
Do-It-Yourself Stories from Customers like You
Nut on the pulley had come loose and worn out the pulley and the belt finally came off Brent Z. • Warren , OR • March 20, 2018
New parts ordered and installed. Hooked everything back up and she's running like a stealth bomber over North Korea.. completely silent
Read more
More
$13.37
- Compare At:
-
$15.91
- You Save:
-
$2.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302901
Machine screw secures panels, brackets, and internal components in washers. Replace missing, rusted, or stripped screws to restore proper fit and alignment.
Do-It-Yourself Stories from Customers like You
Front load washer door latch broken by movers Cyndee F. • Cookeville , TN • September 30, 2016
I ordered new latch and 2 new screws ( imagine not having the screws). I put latch in place and with a phillips screw driver attached 2 screws. Tada works like new. If the owner would have just done this herself, I wouldnt have a new set of infinity front loaders for under $300. So thrilled that I can get replacement parts for my appliances.
Read more
More
$3.74
- Compare At:
-
$4.45
- You Save:
-
$0.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 134412400
Door hinge that restores proper door alignment and smooth pivoting for your refrigerator. Replacing a worn or bent hinge helps stop door sag, rubbing, and uneven gaps so the door seals and closes reliably. What it does:
- Supports and pivots the refrigerator door to keep it aligned and moving smoothly
- Helps stop door sagging, rubbing, sticking, or uneven gaps around the door
- Reduces door noise and wear by restoring stable pivot action
- Helps maintain a consistent door seal to limit moisture and cold-air loss
What's included: One door hinge Install notes:
- Disconnect power and remove food and loose items from the door before starting work
- Support the door while removing fasteners to prevent dropping or damage
- Compare the new hinge to the old one for orientation before installing; tighten fasteners securely but avoid over-tightening
This part fixes the following symptoms
-
Lid or door won't close
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Error code 41 Oh the beeping! Amy N. • Pike Road , AL • April 15, 2018
After reading up on the error codes, I found that my constant beeping was telling me that the door was not well latched. My machine is 12 years old and has seen heavy use, including a broken door handle that has been hanging on with copious amounts of duct tape for a while. I replaced the bent door hinge, worn door latch, and the outer handle. The entire repair required ten minutes and a Phillips head screwdriver. Now it works perfectly with NO more beeping!! Thank you AppliancePartsPros!!
Read more
More
$36.75
- Compare At:
-
$43.73
- You Save:
-
$6.98
Genuine Frigidaire part
By: Frigidaire
Part Number: 134409320
This dispenser assembly replaces a worn or damaged refrigerator dispenser to restore reliable dispensing of water and ice. It provides the dispenser housing and interface needed for proper user operation and sealing at the door. What it does:
- Houses the dispenser components and provides the push-lever/door opening for water and ice delivery
- Restores a broken, cracked or loose dispenser opening that causes poor engagement or cosmetic damage
- Helps stop minor leaks or drips at the dispenser area when seals and gaskets are intact
- Eliminates sticking or misaligned dispenser operation that prevents normal dispensing
What's included: One dispenser assembly. Install notes:
- Disconnect power and shut off the water supply before beginning any work.
- Installation typically requires removing the refrigerator door panel(s) and detaching the old dispenser from the inner door; keep fasteners for reuse unless replacements are provided.
- Handle plastic parts gently to avoid cracking; inspect door seals and gaskets and replace if worn.
- After installation, restore power and water, then test dispenser operation and check for leaks.
Do-It-Yourself Stories from Customers like You
Would not go through rinse cycle Donald S. • Cloudcroft , NM • July 31, 2015
Replaced the water valve assembly. did not really need the dispenser part. problem mainly caused by hard water buildup where the hose connects. also replaced the hoses as they also had some hard water buildup.
Read more
More
$239.30
- Compare At:
-
$287.16
- You Save:
-
$47.86
Genuine Frigidaire part
By: Frigidaire
Part Number: 137089000
Washer air chamber connects the water level pressure switch to the tub. Replace if cracked, kinked, or disconnected causing water level issues.
Do-It-Yourself Stories from Customers like You
The washing machine wouldn't drain error code23 came up Alan R. • Portage , WI • September 22, 2015
Checked manual for error code possible malfunctions. I chose the suggestion that sounded plausible talked to Brent and ordered parts.. The parts were at my door the next morning. Service was professional and fast! Thanks ApplianceParts Pros !!!!
Read more
More
$89.95
- Compare At:
-
$107.04
- You Save:
-
$17.09
Genuine Frigidaire part
By: Frigidaire
Part Number: 134363200
Mounting bracket secures components inside your laundry center. Replace if bent, broken, or missing to eliminate rattling and restore stability.
More
$14.44
- Compare At:
-
$17.18
- You Save:
-
$2.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 131205100
Pan head mounting screw for dryers. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.
More
$10.70
- Compare At:
-
$12.63
- You Save:
-
$1.93