Kenmore Washer Dryer Combo 417.98702891 (41798702891, 417 98702891) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 131731400
$35.71
- Compare At:
-
$38.70
- You Save:
-
$2.99
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134046600
$406.95
- Compare At:
-
$467.17
- You Save:
-
$60.22
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 137455500
$102.60
- Compare At:
-
$102.98
- You Save:
-
$0.38
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 137491301
$164.68
- Compare At:
-
$181.15
- You Save:
-
$16.47
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204357
$45.95
- Compare At:
-
$49.79
- You Save:
-
$3.84
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303161224
$5.42
- Compare At:
-
$5.96
- You Save:
-
$0.54
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5995312641
$7.60
- Compare At:
-
$8.36
- You Save:
-
$0.76
Out Of Stock
Usually ships within 4 - 14 days
Genuine Electrolux part
By: Electrolux
Part Number: 5304536802
Do-It-Yourself Stories from Customers like You
Leaking drain hose. Richard T. • Saint Charles , IL • November 18, 2017
Replaced drain hose and clamp.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131243700
Do-It-Yourself Stories from Customers like You
The bearing on the dryer drum wore out so bad the ball fell off Thomas J. • Green Bay , WI • October 31, 2016
I replaced the ball and socket connection for the drum. After doing so, I realized that the belt had been stretched and the tension pulley was not putting enough tension on the belt to turn the drum. After ordering a new belt, extra screw that was lost while disassembling the dryer, and some high temperature lubricant for the drum ball and socket the dryer now runs as well as it did when it was new.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937139
The Front Felt Glide Assembly is an OEM part for Frigidaire dryers. This part allows smooth operation of the dryer drum, providing a felt pad that the drum glides on as it rotates. This not only helps to support the drum but also minimizes friction and noise, contributing to the efficient and quiet operation of the dryer.
Over time, the felt portion of the glide assembly can wear down, leading to increased friction between the drum and the dryer's front panel.
Symptoms of a bad Front Felt Glide Assembly include:
- Unusual noises during operation, such as squeaking or grinding
- The dryer drum may catch or hesitate during rotation
- Increased wear and tear on clothing due to the drum's rough movement
- The dryer may take longer to dry clothes efficiently due to the drum's impaired rotation
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Worn bearing and felt causing dryer drum to rattle and creek Bay S. • Bothell , WA • January 05, 2016
Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303279394
The Tub Seal is an OEM part for Frigidaire washing machines. It is designed to create a water-tight seal between the washing machine tub and the transmission or drive system. This seal prevents water from leaking out during the operation of the washer and protects the mechanical components from water damage.
Symptoms of a failing tub seal include:
- Water leaking from the underside of the washing machine.
- Increased moisture or puddles forming under the machine during use.
- A musty or moldy smell, indicating that water has been seeping and not properly drying.
Causes of a bad tub seal can include aging and wear over time, exposure to harsh detergents that degrade the material of the seal, or mechanical stress from unbalanced loads that can cause the seal to fail. It's important to address these issues promptly to prevent further damage to the washing machine.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisey bearing on spin cycle Neal G. • Klamath Falls , OR • February 14, 2016
I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303283286
The Lower Front Felt Seal is an OEM part for Frigidaire dryers. This seal prevents hot air from escaping the dryer drum, ensuring optimal drying efficiency and preventing heat loss. It also helps reduce noise and vibration during operation.
Causes of a faulty lower front felt seal can include wear and tear over time, damage from foreign objects or excessive heat, or adhesive failure. These factors can result in air leakage, increased drying time, or excessive lint buildup.
Symptoms of a front felt seal may include:
- Air leakage around the dryer door or front panel
- Excessive lint accumulation near the dryer opening
- Unusual noises or vibrations during the operation
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Note: For the Hi-Temp Adhesive, order part number 5308027429. Additional parts to check are the rear drum bearing kit 5303281153 and the front felt glide assembly 5303937139.
Do-It-Yourself Stories from Customers like You
Noisy growling sound. Marks on the clothing Henry K. • Napa , CA • September 21, 2022
Kenmore Dryer Model 41791042000. Replaced the Front Felt Guide Assembly (5303937139) Lower Front Felt Seal (5303283286) Rear Drum Bearing Kit (5303281153) and Dryer Drum Belt. (134503600)
Having performed this same maintenance 5 years ago I was familiar with the process which is fairly straightforward. However, the video for the Front Felt Guide replacement seems to no longer be on the website. Also, the video for the Lower Front Felt Seal is wrong, showing the replacement of some felt seal...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131461200
The Washer Drain Hose is an OEM replacement part for Frigidaire washing machines. It is a flexible, 7 ½ ft plastic hose that connects the washer tub to the household drainage system. The drain hose removes water from the washer at the end of each cycle.
Symptoms of a faulty drain hose include:
- Water failing to fully drain or continuously draining
- Wet flooring around the washer due to leaks
- Excess water left standing in the washer tub after cycles
- Reduced washing performance due to inadequate drainage
Causes of a bad drain hose include kinks or bends that restrict water flow, cracks or holes from wear and tear, and blockages from accumulated debris. These issues can compromise the hose's ability to drain water properly.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaky drain hose Rocco S. • Rochester , NY • February 24, 2017
Simply open the top of the washer by inserting a putty knife (watch YouTube ) and then the front panel by removing two bottom philips head screws on the front. The whole front panel comes right off. Using pliers the spring clams holding each hose, they come off and each hose is replaced. The drain one was only leaking but since it has open I changed both and even the drive belt. Whole job less than 1 hour. BTW parts arrived next day!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131862900
The Idler Pulley is an OEM part for Frigidaire dryers. It helps guide and maintain tension on the dryer drum belt, ensuring the drum rotates smoothly during the drying cycle.
Over time, the idler pulley can wear out due to friction and regular use, or it may become damaged from excessive strain or misalignment. If the idler pulley fails, the dryer drum may not rotate properly, leading to inefficient drying or a complete inability to dry clothes.
Symptoms of a bad Idler Pulley include:
- Squeaking or squealing noises during operation
- The drum not rotating or rotating unevenly
- The belt appearing loose or slipping off the drum
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisey bearing on spin cycle Neal G. • Klamath Falls , OR • February 14, 2016
I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134418700
The Agitator Hub is an OEM part for Frigidaire washing machines. It connects the agitator to the drive shaft, enabling the agitator to rotate and move clothes effectively during the wash cycle.
Causes of a bad agitator hub can include wear and tear from frequent use, exposure to harsh detergents or hard water, or damage from overloading the washer.
Symptoms of a bad agitator hub include:
- Agitator not moving or rotating properly
- Loud noises or grinding sounds during the wash cycle
- Clothes not being cleaned effectively
- The washer shaking or vibrating excessively
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The agitator was not working John H. • Auburn , NY • October 11, 2016
The agitator stopped functioning and there was a squeaking sound occurring in agitation mode. I found that if I cranked down on the agitator cap, screwing in as hard as I could, the agitator would work briefly, then the cap would loosen and agitator stop moving. I removed the agitator cap, along with which came the agitator stud cap and a rubber washer/seal which was jammed up into the underside of the cap. I lifted out the agitator from the drum and inspected it and the hub best I could....
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204401
This agitator is a genuine Frigidaire part, sold individually. This agitator can be used as a replacement part for a washing machine or a washer/dryer combination appliance. This part rotates within the tub of the washing machine so that clothes and other items are tumbled around and fully cleaned.If an agitator has been subject to damage at some point in the standard lifespan of a washing machine, symptoms of damage will manifest in the form of a washing machine that will not agitate in a normal laundry cycle. If this is occurring, the agitator should be inspected for visible signs of damage, including punctures, scrapes, tears, and erosion to the material that could preclude it from serving its function. If the agitator seems damaged upon assessment, it should be removed and replaced with this genuine OEM replacement part before using the washing machine again.This is an OEM part sourced directly from the manufacturer. It is sold individually. This agitator is compatible with the following appliance brands: Frigidaire, Kenmore, Gibson, and Kelvinator.
Do-It-Yourself Stories from Customers like You
Washer agitator and hub broken Michael A. • Fayetteville , AR • July 18, 2015
I own several apartments with same washer/dryer combo. A couple months ago, one of my washers stopped agitating. I hired an Appliance Repair Company. They charged my $95 for agitator, $65 for hub and $120 for service call, plus tax for a total of $310. Oh, and it took them FOUR WEEKS to get the part in and fix my washer!. Something to do with "Frigidaire shipping issues".
Last week I had another unit break with same problem. Ordered parts from AppliancePartsPros.com for $80, parts arrived...
Read more
More