Kenmore Refrigerator 596.77604801 (59677604801, 596 77604801) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11708403
Do-It-Yourself Stories from Customers like You
Door not stopping Jacqueline D. • Marlborough , MA • August 10, 2015
Ordered new bracket two screws easy fix
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11573362
Mounting screw for refrigerator assembly. Secures components and panels in place. Replace if screw is stripped, missing, or no longer holding tight.
Do-It-Yourself Stories from Customers like You
We had lost/ damaged some refrigerator parts during a move Randy F. • Indianapolis , IN • October 05, 2015
We were able to easily order the parts we needed to fix our refrigerator. The diagram and break-downs of the appliances make it really easy to locate the parts that you need.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11750607
Reduces heat transfer in your refrigerator cabinet for efficient cooling and less frost buildup. Replace if damaged or deteriorated. Verify fit by model.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 10623002
This evaporator clip secures the refrigerator evaporator assembly and related components so the cooling system stays aligned and vibration-free. It helps maintain proper airflow and prevents rubbing or loose parts. What it does:
- Holds the evaporator coil/assembly or associated covers in place
- Prevents vibration, noise, and contact between the coil and cabinet parts
- Helps maintain consistent airflow for reliable cooling performance
- Commonly linked to rattling, buzzing, or loose parts around the freezer evaporator
What's included: One evaporator clip Install notes:
- Disconnect power before servicing the appliance
- Handle evaporator and surrounding fins carefully; they are sharp and fragile
- Verify clip orientation against the OEM diagram before fastening
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12726003
Protective cover for water valves and inlet hoses. Replace if cracked, broken, or missing to shield components from debris and accidental contact.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 606755
This insulation bag fits inside the refrigerator or freezer door panel to help maintain consistent internal temperatures. It acts as a thermal barrier that prevents warm outside air from affecting the sealed compartment. Replace it if you notice condensation forming on the door interior, inconsistent temperatures, or if the existing insulation is torn, compressed, or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10149389
This is a door handle designed for the exterior of the refrigerator, providing a grip for opening and closing the door. It attaches to the door panel via mounting brackets or screws. Replace this handle if it is cracked, loose, or broken off, making it difficult to open the refrigerator door properly.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11673433
Genuine Whirlpool part
By: Whirlpool
Part Number: W11702858
This outer cabinet housing provides a durable structural shell that supports internal components and protects them from debris and wear. It restores proper alignment and enclosure for safe, stable appliance operation. What it does:
- Replaces a cracked, dented, or misshapen outer housing that can allow debris or moisture into the appliance
- Restores proper mounting surfaces and clearances for panels, controls, and internal assemblies
- Helps reduce rattling or vibration caused by a compromised cabinet
- Prevents exposure of internal wiring and components to contaminants
What's included:
- One outer cabinet housing
Install notes:
- Recommended for experienced DIYers; some disassembly of panels and components is required
- Disconnect power and any water lines before beginning work
- Keep track of screws and brackets; some fasteners may be reused
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11727809
Plastic evaporator cover for refrigerators. Installs over the evaporator coil in the freezer section. Replace if cracked, broken, or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12722803B
The mullion rail is the vertical divider strip that separates the fresh food and freezer compartments in side-by-side refrigerators, often housing the water and ice dispenser controls. This part needs replacement if you notice cracks in the plastic, damaged dispenser components, or poor sealing between compartments that affects temperature control.
Do-It-Yourself Stories from Customers like You
Door was not closing correctly all the time Kirk F. • Plano , TX • April 05, 2015
Looked for parts online that were worn and compared prices. Best price was appliance part pros. Ordered and received in 2 days and easily replaced worn parts.
Read more
More
$151.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003854
Structural frame that supports crisper drawers and holds the glass shelf above them. Replace if cracked, broken, or damaged to restore proper drawer support.
Note: Per the manufacturer, the center rail is part number WPW10326469.
Do-It-Yourself Stories from Customers like You
Broken refridgerator interior plastic parts causing issues Jim M. • Portland , OR • September 28, 2025
Looked up parts based on fridge model number, watched videos, and replaced parts using just a few tools... easy. Parts came quick, well packaged.
After 16 years, plastic parts deteriorate and break. The fridge was operating fine, but the drawers and covers were failing. Much cheaper to replace a few parts ($$-$$$) than buy a new fridge ($$$$). The new parts matched up exactly to old ones. The videos were very helpful, but not perfect... for the Crisper Frame, there was a structural metal...
Read more
More
$174.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12722803AP
Color: Grey
The Flapper Door with Mullion Heater is an OEM part for Whirlpool refrigerators. This part helps seal the gap between the refrigerator and freezer doors, preventing warm air from entering and cold air from escaping.
Causes of a bad flapper door with mullion heater can include wear and tear over time, electrical issues affecting the heater, physical damage from repeated opening and closing of the doors, or warping due to temperature fluctuations.
Symptoms of a bad flapper door with mullion heater include:
- Condensation or frost buildup around the door seal
- Increased energy consumption due to temperature inefficiency
- The refrigerator door not closing properly
- Visible damage or wear to the flapper door or heater
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Door mullion was broken door was very difficult to close Gregory F. • Dumont , NJ • October 16, 2016
Found the part # on manufacturers website. Ordered it from ApplianceParts Pros. Watched a video of repair on Youtube. Fix was done n about 10 mins.
ApplianceParts Pros had the part cheaper than manufacturer. Delivery was prompt. Replacement easy.
Read more
More
$118.53
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
One of the teeth on the ice stripper was broken off Michelle F. • Hines , OR • August 07, 2014
Simply replaced the broken ice stripper with a new one.
Read more
More
$47.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10642946
Replacement door handle for your refrigerator. Restores secure grip when original is cracked, broken, or worn. Mounts directly to door for safe opening.
More
$92.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10191117
Replaces a cracked, warped, or missing cover on your refrigerator. Protects internal components and restores proper fit so parts stay secured.
Do-It-Yourself Stories from Customers like You
Missing a hinge and hinge cover. James H. • Killeen , TX • August 01, 2020
As soon as the parts arrived, installed them seamlessly. Thank you.
Read more
More
$14.95
Out Of Stock
Usually ships within 4 - 14 days