Kenmore Dishwasher 665.13293K110 (66513293K110, 665 13293K110) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10505748
The Tub Wheel Assembly is an OEM part for Whirlpool dishwashers. It consists of the wheels and their mounting components that facilitate the smooth gliding of the dishwasher rack in and out of the unit. This assembly is critical for the operation of loading and unloading dishes, ensuring that the racks move smoothly without jamming or causing damage to the dishwasher interior.
Symptoms of a faulty tub wheel assembly include:
- Difficulty in sliding the dishwasher racks.
- Racks getting stuck or derailing during movement.
- Unusual noises when the racks are moved.
The primary causes of wear or damage to the tub wheel assembly can include regular use, excessive load on the racks, or accidental force applied when loading or unloading dishes. These can lead to broken wheels or dislodged fittings, necessitating replacement to maintain functionality.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Top rack rollers were worn Scott A. • Fort Worth , TX • August 03, 2014
Replaced rollers which were easy except i had to pull the dishwasher about half way out of the cabinet
Read more
More
$9.41
- Compare At:
-
$11.29
- You Save:
-
$1.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10350382
Replacement upper dishrack for dishwashers. Holds dishes, glasses, and utensils during wash cycles. Replace if rusted, cracked, or broken tines damage items.
Do-It-Yourself Stories from Customers like You
Rusted tines on upper and lower racks Michelle L. • Sussex , WI • October 19, 2018
Kitchen Aid dishwasher is 11 years old, and the tines have been rusting and biting the dust one by over the last few years. Rather than further destroy my dishes by abrading them with rust particles, I decided to get new racks. They are terribly expensive, and I pondered getting a new dishwasher. It wouldn't be that much more expensive. But I love mine and how well it washes. It has a stainless interior, and all of the seals are in excellent shape. I didn't need any tools. (Although I'm a...
Read more
More
$198.42
- Compare At:
-
$236.12
- You Save:
-
$37.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10455271
Fix water leaking from the bottom or poor cleaning in lower rack. This dishwasher diverter cover protects internal valve components. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Leaked water onto diverter motor(bottom center) Mark D. • Milan , NH • November 23, 2019
Replaced sump because the seal is not sold separately. You will need a skinny clamp after cutting the original swaged clamp off. Also Had to replace the cover as its seal is not sold separately either. Used dish soap on seals during assembly.
Read more
More
$26.21
- Compare At:
-
$31.19
- You Save:
-
$4.98
Genuine Whirlpool part
By: Whirlpool
Part Number: W10873429
Bracket that secures the water level switch in your dishwasher. Replace if cracked, broken, or damaged, causing the switch to shift out of position.
Do-It-Yourself Stories from Customers like You
The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down.
Read more
More
$26.74
- Compare At:
-
$31.82
- You Save:
-
$5.08
Genuine Whirlpool part
By: Whirlpool
Part Number: W11086533
The Insulation is an OEM part for Whirlpool dishwashers, specifically engineered to enhance the appliance's efficiency by reducing heat loss and minimizing noise. This insulation wraps around the dishwasher, acting as a barrier that keeps heat within the appliance during cycles and dampens the sound of its operation, making for a quieter kitchen environment.
Causes of a bad insulation part can include wear and tear over time, moisture damage leading to mold or mildew buildup, or physical damage from pests or mishandling during installation or repairs.
Symptoms of inadequate insulation include:
- Noticeable increase in the dishwasher's noise level
- Exterior surfaces of the dishwasher feeling warmer than usual
- Longer wash cycles due to inefficient temperature maintenance
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Jenn airJDB8000AWS3 dishwasher would not drain Lynden B. • Benicia , CA • December 17, 2019
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to...
Read more
More
$27.77
- Compare At:
-
$33.05
- You Save:
-
$5.28
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212560
Side mounting bracket kit secures your dishwasher to adjacent cabinetry. Replace missing, damaged, or broken brackets for stable installation.
Do-It-Yourself Stories from Customers like You
Dishwasher mounting two cabinets Franklin B. • Hoquiam , WA • December 16, 2017
I haven't yet started to place the dishwasher in place is
Read more
More
$27.77
- Compare At:
-
$32.77
- You Save:
-
$5.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195038
The Nut is an OEM part for Whirlpool dishwashers. This nut secures the float switch, a key component in regulating the water level within the dishwasher. The float switch ensures your dishwasher does not overfill by triggering the water to stop once it reaches a certain level.
Over time and with regular use, the nut that holds the float switch in place can become loose or damaged. This could potentially allow water to seep through gaps, leading to leaks, or could cause the float switch to malfunction, affecting the dishwasher's ability to regulate water levels accurately.
Symptoms of a faulty Nut include:
- Water leaks from the base of the dishwasher
- The dishwasher overfills or underfills
- Unusual noises during operation
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Water leaks around the hose connection points
- The hose slipping off the fitting
- Visible rust or wear on the clamp
- Difficulty in tightening the clamp to secure the hose
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.41
- Compare At:
-
$11.10
- You Save:
-
$1.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531323
Seals the water inlet connection to prevent leaks where water enters the dishwasher tub. Replace if you notice moisture damage or leaking at the valve inlet.
Do-It-Yourself Stories from Customers like You
Jenn airJDB8000AWS3 dishwasher would not drain Lynden B. • Benicia , CA • December 17, 2019
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to...
Read more
More
$26.21
- Compare At:
-
$31.19
- You Save:
-
$4.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10323192
Dishes coming out dirty or spotted? A broken manifold disrupts water flow to spray arms. This internal pipe assembly restores pressure and distribution.
Do-It-Yourself Stories from Customers like You
The dishes began to come out dirty spotted and generally not cleaned filters were checked and cleaned black residue was found on floor of dishwasher Rene L. • Port Orchard , WA • September 14, 2021
1. Ran white vinegar through the wash cycle, twice. Helped a little.
2. Used pointed objects to clean holes in spray arms.
3. Replaced all spray arms with new parts ordered from you.
4. Found manifold for upper tray was broken. Replaced manifold.
Seems to be working now. The only thing I cannot figure out is how to change the upper spray arm at the top of the dishwasher. It is supposed to pop out; but when I attempt to remove the old arm, the water line pulls loose. I have left the old...
Read more
More
$61.95
- Compare At:
-
$73.72
- You Save:
-
$11.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP308685
Screw secures appliance panels and access covers. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattles or gaps.
Do-It-Yourself Stories from Customers like You
Under the counter mounting brackets were missing Douglas A. • Glen Allen , VA • June 19, 2019
After several attempts at Local Hardware stores and Lowe's and Home Depot to find them I called AppiancePartsPros.com. I gave them the model number and what I was looking for and customer service directed me to the part on the Web site. They were extremely helpful and it was very fast and I got the parts the next day.
Read more
More
$7.31
- Compare At:
-
$8.63
- You Save:
-
$1.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10462232
If your detergent dispenser is loose or falling off, this bracket secures it to the door panel. Moderate DIY repair requiring door disassembly.
Do-It-Yourself Stories from Customers like You
Dishwasher detergent dispenser Howard K. • Rockaway , NJ • November 01, 2015
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself!
Read more
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP356138
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
- Water leaks around hose connections
- Loose or disconnected hoses
- Unusual noises or vibrations during operation
- Water pressure issues within the washing machine
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP302868
Color: Black. Screw for lower toe panel. For Biscuit screw use 3400865, for white screw use WP3400836.
Do-It-Yourself Stories from Customers like You
Dishwasher door panel was rusting Prashant K. • Fishers , IN • October 11, 2014
I had no hope of separating the panel from the frame without damaging the frame since the two parts were rusted pretty badly and the screws holding the panel to the frame were completely beyond salvage. So I had to replace both the panel and the frame. I ended up removing the electrical/electronic connections, removing the panel/frame from the hinge and then replacing it with the new parts. Took about 90 minutes but the hardest part was removing other items from the rusting frame without...
Read more
More
$7.31
- Compare At:
-
$8.63
- You Save:
-
$1.32
Genuine Whirlpool part
By: Whirlpool
Part Number: W10795980
The Screw Hole Cap is an OEM part for Whirlpool dishwashers. It covers the screw holes, providing a clean and finished appearance while preventing moisture and debris from entering the screw openings. This helps maintain the dishwasher's aesthetic and ensures that screws remain protected from rust and corrosion.
Causes of a bad screw hole cap can include regular wear and tear, accidental impacts, or misplacement during maintenance.
Symptoms of a bad screw hole cap include:
- Missing or loose caps
- Moisture or debris accumulating in screw holes
- Visible wear or damage to the caps
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Screw hole plastic cap broke during installation Lori D. • Louisville , KY • March 28, 2017
I ordered the part and it was delivered the next day! Amazing experience!
Read more
More
$13.61
- Compare At:
-
$16.20
- You Save:
-
$2.59
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850371
Replacement hinge brace for dishwasher doors. Anchors the door hinge assembly to the tub. Install if original is cracked, warped, or missing.
Do-It-Yourself Stories from Customers like You
My dishwasher is leaking underneath. Karen H. • Norway , ME • May 26, 2023
Received your parts very fast & installed them with some youtube video assistance. The leak is gone. The dishwasher is once again operational. Beats a $150+ service call where the repairman breaks more than he can fix!!!
Read more
More
$21.79
- Compare At:
-
$25.93
- You Save:
-
$4.14