Kenmore Range 665.92014102 (66592014102, 665 92014102) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400882
This machine screw is used across appliances to secure brackets, covers, and internal components. Replacing a missing or stripped fastener helps keep parts aligned and tight, reducing vibration and preventing loose or shifting assemblies.
- Provides machine-thread fastening for panels, brackets, and internal parts
- Helps eliminate rattling, vibration, and loose fits
- Restores proper attachment when the original screw is stripped, missing, or corroded
- Used wherever an 8-32 screw is specified in the service manual or parts list
What's included: One screw
- Disconnect power to the appliance; turn off gas/water if applicable
- Match the screw to the original location to confirm size and thread
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten to prevent stripping or cracking
Do-It-Yourself Stories from Customers like You
I had to change the burner switch Paul C. • Rochester , NY • November 09, 2014
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part.
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400832
Screw for side trim.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP179051
This 10-32 machine screw secures panels, brackets, and internal assemblies in your appliance. Replacing missing or stripped hardware restores a tight, rattle-free fit and helps keep components properly aligned.
- Provides a threaded fastener for metal-to-metal connections
- Helps maintain correct alignment of panels, brackets, and housings
- Replaces missing, rusted, or stripped screws
- Symptoms include loose or vibrating panels, gaps/misalignment, or hardware that won't tighten
What's included: 1 screw Install notes:
- Disconnect power (and shut off gas/water, if applicable) before servicing
- Match the 10-32 thread and length to the original screw for the location
- Start by hand to avoid cross-threading; tighten snugly without over-torquing
- Retain and reinstall any original clips, spacers, or washers used in your model
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$8.36
- Compare At:
-
$9.86
- You Save:
-
$1.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196175
Size: 8-18 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Oven drawer wouldn’t slide properly. Nick B. • Hanover , MD • November 09, 2020
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10107820
Includes lock latch motor and switch
This part fixes the following symptoms
-
Door won't open after self cleaning cycle
See more...
Do-It-Yourself Stories from Customers like You
Range would not go into self clean. Gary S. • Keene , VA • April 04, 2014
I knew the door latch was suppose to lock for self clean and it wasn't, so I took the back off and after tracing out wires and the linkage to the door latch, determined that it was a faulty motor on the latch lock. I got on line and Appliance Parts Pros was the first place that I found the part. I was surprised that it wasn't real expensive, but I kept looking for a cheaper price only to come back to order it from APP. I order it around 9:00 on a Thursday night and it was on my front porch...
Read more
More
$127.40
- Compare At:
-
$152.88
- You Save:
-
$25.48
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053807
This hinge is for painted door only. For stainless steel door use WP8272822.
Do-It-Yourself Stories from Customers like You
The oven door would not close completely William R. • Emporia , KS • July 27, 2016
This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up...
Read more
More
$75.63
- Compare At:
-
$90.00
- You Save:
-
$14.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196068
This red indicator light lens covers the control-panel light opening. It restores a clean, finished look and keeps the status light easy to see while helping protect the opening from debris and accidental contact.
- Covers and diffuses the indicator light for clear visibility
- Fills the control panel opening for a finished, factory appearance
- Helps shield the opening from dust, splashes, and contact
- Common fixes: cracked, missing, loose, or discolored indicator lens
What's included: 1 red indicator light lens Install notes:
- Disconnect power by unplugging the appliance or switching off the breaker before servicing
- Access the control panel/backguard per your model's instructions
- Release the old lens (tabs/retainer) and press the new lens into the opening until fully seated
- Restore power and verify the indicator light is visible through the lens
Do-It-Yourself Stories from Customers like You
Dual burner went to full hot no matter what the knob was set at Richard L. • Biddeford , ME • January 18, 2020
Replaced the burner switch. While I was in there, I noticed that the indicator light holder had broken off the lens (poor setup) and that one of the wires to the socket was too short so I added a short segment to the wire with insulated crimp connectors and all is well!
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053834
Color: White
Do-It-Yourself Stories from Customers like You
Broken oven door glass and trim Heidi A. • Topeka , KS • December 05, 2014
Replaced glass and trim
Read more
More
$139.25
- Compare At:
-
$165.71
- You Save:
-
$26.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8203546
This terminal block is the insulated connection point where the appliance's incoming power ties into the internal wiring. Replacing a heat-damaged or loose block restores a safe, reliable electrical path and helps prevent arcing and intermittent power loss.
- Connects the supply conductors to the unit's internal wiring
- Provides insulated posts to securely fasten and distribute power
- Helps maintain tight, low-resistance connections
- Common failure signs: melted/discolored plastic, burned or loose terminals, arcing, scorching, or intermittent/no power after confirming the cord and breaker
What's included: 1 terminal block Install notes:
- Disconnect power at the breaker or unplug the appliance; verify no voltage before servicing
- Photograph or label wire positions to ensure correct reassembly
- Inspect and replace any heat-damaged wire ends or lugs; use appropriate terminals
- Tighten connections securely and ensure wires are fully seated and strain-relieved as originally installed
Do-It-Yourself Stories from Customers like You
Bad terminal block Michael M. • Ronkonkoma , NY • June 29, 2015
Replaced it with the part I got from you.
Read more
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196037
This front leveling leg adjusts the height at the front of your appliance to keep it level and steady. Replacing a worn or missing foot helps eliminate rocking, protect floors, and make fine leveling adjustments simple.
- Threads into the base at the front corner to raise or lower the unit for accurate leveling
- Stabilizes the appliance to minimize rocking and vibration when opening the door or using the cooktop
- Restores proper adjustment when the original foot is stripped, bent, or missing
- Common signs include a wobbling appliance, difficulty leveling, or metal-to-floor contact/scuffing
Includes: 1 front leveling leg. Install notes:
- Disconnect power; turn off the gas supply
- Protect the floor and use an assistant to carefully slide and tip the appliance
- Start the new leg by hand to avoid cross-threading; finish adjustment with a wrench
- Level front-to-back and side-to-side, then verify stability before restoring service
Do-It-Yourself Stories from Customers like You
Bought a used stove needed cosmetic fixes. Wendy G. • Defiance , OH • November 09, 2023
Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled.
Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly.
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196174
This machine-thread screw secures brackets, panels, and trim inside your appliance. Replacing a missing or stripped fastener restores a tight fit, reduces rattles, and keeps assemblies properly aligned. What it does:
- 10-32 machine-thread screw used to fasten metal components
- Maintains alignment and stability of panels, brackets, and trim
- Replace if threads are stripped, head is damaged, corroded, or missing
- Common symptoms: loose panel/handle, vibration noises, gaps or misalignment
What's included:
Install notes:
- Disconnect power (and gas, if applicable) before servicing
- Support the component and start threads by hand to avoid cross-threading
- Use the correct driver; do not overtighten to prevent stripping
- Match thread size and length specified for your model
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8523047
This radiant surface heating element restores proper burner performance on electric glass cooktops/ranges. It replaces a failed element so cookware heats evenly and reliably beneath the ceramic glass. What it does:
- Converts electrical energy into radiant heat under the glass-ceramic surface
- Replaces a burner that won't heat at all
- Helps resolve uneven heating or only part of the ring glowing
- Addresses visible damage such as hot spots, discoloration, or breaks in the element
What's included:
Install notes:
- Disconnect power at the breaker before servicing; allow the cooktop to cool completely
- Lift and support the cooktop; handle the element carefully—it is fragile
- Note wire locations and move them one at a time to the new element; ensure terminals are fully seated
- Reinstall mounting clips/brackets so the element sits flat and clear of the glass before restoring power
Do-It-Yourself Stories from Customers like You
Two burners out Dana D. • Starke , FL • March 11, 2019
Parts came in and they were exact replacements so no problem changing them out. The stove works great.
Read more
More
$134.25
- Compare At:
-
$160.13
- You Save:
-
$25.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98008545
Color: Black. For biscuit order 98008169. For white order WP98008544.
Do-It-Yourself Stories from Customers like You
Missing screws and bad sealing door gasket Thomas P. • Palmdale , CA • December 15, 2015
Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises.
Read more
More
$7.95
- Compare At:
-
$10.99
- You Save:
-
$3.04
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392899
Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.
Do-It-Yourself Stories from Customers like You
Lack of accurate control on 2 electric range burners Jeff D. • Neenah , WI • April 09, 2016
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job.
The fix only took about 15 minutes because I was prepared after watching the video.
Read more
More
$17.76
- Compare At:
-
$21.31
- You Save:
-
$3.55