Kenmore Range 790.45079400 (79045079400, 790 45079400) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217002
The Oven Temperature Probe is an OEM part for Frigidaire ovens. This part monitors the oven's internal temperature, ensuring that it accurately reflects the set temperature on the oven's control. By measuring the heat inside the oven, the temperature probe helps in maintaining consistent cooking results, preventing undercooking or overcooking of food.
Over time, the oven temperature probe can fail or become inaccurate due to wear and tear, exposure to extreme temperatures, or damage from cleaning and handling. This can lead to uneven cooking results, with food being overcooked or undercooked, despite setting the oven to the correct temperature.
Symptoms of a bad Oven Temperature Probe include:
- Oven not reaching the set temperature
- Oven temperature fluctuating more than usual
- Food not cooking evenly or within expected time frames
- Error codes displayed on the oven indicating a temperature sensor issue
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Error code F10 Dan H. • Culver City , CA • December 27, 2019
Bought a used Frigidaire 36 inch stove. The broiler didn't come on but the burners lit and the stove worked so I made do for about 4 or 5 years with that. Then the F10 code came up and it wouldn't stop beeping until I unplugged it. I figured the electronics/circuit board was probably bad and ordered a replacement. I was confused about what part to order. The parts list includes "Control Panel" and "Clock - Timer". Turns out the control panels are the glass panel on the front of the stove...
Read more
More
$53.42
- Compare At:
-
$63.57
- You Save:
-
$10.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255006
The Heating Element is an OEM part for Frigidaire ovens and ranges. It is responsible for providing the heat necessary for baking or broiling. The element converts electrical energy into heat through resistance; this heat is then distributed throughout the oven cavity to cook or bake food evenly.
Common causes of a bad Heating Element can include visible signs of damage like blistering, bulging, or breakage. A burnout may occur when the element overheats and fails, leading to no heat production. Additionally, electrical issues like a blown fuse or faulty wiring can prevent the element from receiving power.
Symptoms of a bad Heating Element include:
- The oven does not heat up
- Uneven cooking or baking
- Longer cooking times than usual
- The element not glowing when the oven is turned on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees Mark R. • Eastham , MA • May 15, 2015
One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it...
Read more
More
$146.95
- Compare At:
-
$176.34
- You Save:
-
$29.39
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 316555800
The Dual Element is an OEM part for Frigidaire ranges. This element features two heating zones, allowing for versatile cooking options by providing both high and low heat settings on the same burner. It ensures efficient and consistent heating, making it ideal for various cooking tasks. It contains a 9-inch, 1200-watt element and a 6-inch, 1300-watt element, combining for 2500 watts at 240 volts
Causes of a bad dual element can include electrical issues, wear and tear from regular use, or physical damage such as cracks or breaks in the heating element. These issues can lead to inconsistent heating or complete failure of the element.
Symptoms of a bad dual element include:
- Burner not heating up
- Inconsistent or uneven heating
- Element not switching between high and low heat
- Visible damage to the element
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The outer ring of the front left element would heat but the inner would not Larry G. • Flintstone , GA • December 17, 2019
Replacement of the element was relatively straightforward, but there are a couple of things to be aware of before you begin. First, turn off power to the stove at the breaker box. Allow the cooktop to raise by removing the two screws that secures it on the underside of the front edge. Open the oven door to do this. Removal of the old element is simple, just remove the two screws that secure the wide mounting bracket that holds the two front elements. Carefully turn the assembly over. To...
Read more
More
$130.95
- Compare At:
-
$154.52
- You Save:
-
$23.57
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$15.95
- Compare At:
-
$18.82
- You Save:
-
$2.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255605
The Broil Element is an OEM part for Frigidaire ovens and ranges. It is specifically designed to provide the high heat necessary for broiling food, such as meats and vegetables. Located at the top of the oven interior, the broil element radiates heat downwards, creating a high-temperature environment ideal for browning and caramelizing the exterior of dishes while locking in juices.
Over time, the broil element can burn out or become damaged due to high temperatures and frequent use.
Symptoms of a bad Broil Element include:
- Lack of heat when broiling
- Uneven cooking or browning of food
- Visible damage or breaks in the element
- No visible glow from the element during operation
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$128.95
- Compare At:
-
$152.16
- You Save:
-
$23.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 316135401
The Surface Element is an OEM part for Frigidaire electric ranges. It is the heating element located on the cooktop, responsible for providing the heat necessary for cooking. This component is essential for the proper functioning of your stove, ensuring consistent and reliable heating for various cooking tasks.
Causes of a bad surface element can include wear and tear from regular use, damage due to spills or overheating, or electrical failures such as a short circuit. A faulty surface element can result in uneven cooking or complete failure to heat.
Symptoms of a bad surface element include:
- Element not heating up
- Uneven heating or hot spots on the element
- Visible damage such as burns or cracks
- Element cycling on and off erratically
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The right front burner was burn out Eduardo M. • Pembroke Pines , FL • March 16, 2014
Order the part to ApliancePartsPro and within 3 days I had it delivered to my front door. Looked up in their help page and was guided how to do it. It was so ease . I will recomend all my friend to get their parts at ApliancePartsPro. I am very please with the service and quality.
Read more
More
$97.95
- Compare At:
-
$127.18
- You Save:
-
$29.23
Genuine Frigidaire part
By: Frigidaire
Part Number: 903136-9020
The Surface Burner Infinite Switch is an OEM part for Frigidaire ranges. This switch is responsible for controlling the heat output of the surface burners on your range. By adjusting the infinite switch, you can set the burner to different heat levels, allowing for precise cooking control.
Common causes of a bad infinite switch include electrical failures, internal component wear, or physical damage to the switch mechanism.
Symptoms of a bad surface burner infinite switch include:
- Burner not heating up
- Burner only working at one heat level
- Burner not turning off
- Inconsistent or fluctuating heat levels
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Burner was hard to turn on/off and almost impossible to adjust Clark A. • Austin , TX • September 01, 2014
The problem seemed to be with the switch so I watched a few youtube videos to learn more about how ranges work. After locating the correct replacement switch I ordered it on-line around 10 pm Tuesday night. The new switch arrived Thursday morning at about 10 am and I had my range back up and working like new in less that 30 minutes.
The hardest part was figuring out how to remove the slide in panel to access the switch. There were plastic washer/nuts behind each know which I was able to...
Read more
More
$78.41
- Compare At:
-
$93.31
- You Save:
-
$14.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 903136-9010
The Switch is an OEM part for Frigidaire ovens. This component is responsible for controlling the flow of electricity to various functions of the oven, such as the bake and broil elements, ensuring the oven operates correctly according to the selected settings.
Causes of a bad switch can include wear and tear from frequent use, electrical surges, or physical damage from impact or exposure to moisture.
Symptoms of a bad switch include:
- The oven not turning on or responding to control inputs
- Inconsistent heating or temperature control issues
- Certain oven functions not working, such as the bake or broil elements
- The switch feeling loose or sticking when turned
This OEM replacement is also compatible with Electrolux, Gibson, Tappan, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Burner switch was not turning the burner off Mary K. • Dublin , GA • July 13, 2014
We cut the power, took the control panel off, got the burner switch number from the original part, and ordered a new one. We were a little worried at that point, because your website offered a "replacement" part, with a different number than the original. However, we put the model number into your double check feature and were assured that we were getting the right part. The part arrived in two days and frankly we were still worried, because the new part was slightly larger than the original....
Read more
More
$72.71
- Compare At:
-
$86.52
- You Save:
-
$13.81
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400
The Oven Light Socket is an OEM replacement part for Frigidaire electric ranges and wall ovens. It houses the bulb that illuminates the interior of the oven cavity.
Causes of a bad light socket can include a loose or broken connection due to regular use, scorched or burnt terminals from overheating, or damage from moisture.
Symptoms of a bad light socket include:
- The oven light not turning on when activated
- Flickering or intermittent bulb operation
- Signs of corrosion or oxidation around the bulb base
- Excessive heat emission from the light area
This OEM Frigidaire replacement part is also compatible with ranges and wall ovens from Electrolux, Gibson, and Kelvinator.
Do-It-Yourself Stories from Customers like You
Light socket inside oven broke Linda S. • Novato , CA • June 02, 2015
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm!
Read more
More
$51.23
- Compare At:
-
$61.48
- You Save:
-
$10.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 318191023
The dual element infinite switch is an OEM replacement part for Frigidaire ranges. It controls the dual element for the cooking surface.
Causes of failure can involve moisture intrusion due to cleaning or failed electronic components over many years of use.
Symptoms of a bad switch can be:
- Temperature fluctuations outside of the set range
- Runaway temperatures of the surface element
- Circuit breaker tripping when trying to use the surface element
- No power to the element when you have power coming to the switch
This replacement part is also compatible with ranges from Electrolux, Gibson, Kelvinator, and Kenmore brands.
Do-It-Yourself Stories from Customers like You
Large element was very erratic on temperature low/high. Rodney C. • Lake Wales , FL • March 01, 2018
Replaced the infinite, dual, switch. Very good instructional video for Safety, removal * install.
Read more
More
$43.61
- Compare At:
-
$55.93
- You Save:
-
$12.32
Genuine Frigidaire part
By: Frigidaire
Part Number: 316220805
This adhesive control panel overlay is the faceplate for the electronic oven control on select ranges and wall ovens. It restores readable button labels and a clean, protected surface when the original overlay is faded, bubbled, or damaged.
- Provides printed legends for the keypad buttons and display around the electronic control (EOC)
- Protects the touch surface from wear and cleaning
- Restores a neat, easy-to-read control area
- Typical replacement reasons: peeling, bubbling, cracks, discoloration, or illegible labels
What's included: 1 control panel overlay. Install notes:
- Disconnect power to the appliance before servicing the control panel
- Remove the control panel/bezel as required to access the old overlay
- Peel off the old overlay; clean and dry the mounting surface before applying the new one
- Align with display and key locations; press from center outward to bond and smooth out air
Do-It-Yourself Stories from Customers like You
My Frigidaire stove just over heated and wouldn’t turn off. I had to unplug from outlet the display was flashing code f1. Eugenia Kay T. • Lexington , KY • January 01, 2019
I went to the Appliance Parts Pros website and spoke with Shawn in customer service via the chat option. He was very helpful and suggested I order the thermostat for my stove. It arrived in about a week and I installed it the same day. It was a very easy install with the exception of the wiring harnesses didn’t match so I had to splice the wires together. It worked perfectly and now my stove is working like new. I really appreciate everything Shawn did to assist me and make this project much...
Read more
More
$44.11
- Compare At:
-
$50.00
- You Save:
-
$5.89
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527841
The Rocker Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for turning the interior oven light on and off. The light switch allows visibility of the oven cavity for viewing food during the cooking process.
Causes can include normal wear and tear over time, exposure to heat inside the oven cavity, or accidental damage.
Symptoms of a bad oven light rocker switch include:
- The oven light failing to illuminate when the door is opened
- The light remaining on even when the door is closed
- An inconsistent or flickering oven light
- The switch itself becoming loose, cracked, or non-responsive
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
1 of the 4 burners would not ignite with its own control Shane W. • Fullerton , CA • November 15, 2022
Removed & replaced igniter switch assembly. The hardest part was figuring out how to remove the range top...look up a YouTube video with your manufacturer and model number to see how to do it.
Read more
More
$15.50
- Compare At:
-
$18.45
- You Save:
-
$2.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 318394803
Has three terminals.
Do-It-Yourself Stories from Customers like You
Oven light stayed on when door was closed Robert S. • Jacksonville , IL • June 14, 2015
When trouble shooting the problem I found that the light switch housing outer lip was broken allowing the switch to push through mounting surface behind the oven door. This is a slide in range so, I proceeded to pull the range away from the counter where I could unplug the power cord. Once the power was off like located the panel on the right upper side of the unit and removed the screws to allow access to the switch. I then unplugged the switch from the wiring harness and removed the damaged...
Read more
More
$49.95
- Compare At:
-
$59.94
- You Save:
-
$9.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303288565
This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.
- Fastens the switch body to a bracket or chassis panel
- Helps keep the switch aligned for consistent actuation
- Replaces stripped, corroded, or missing mounting hardware
- Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area
What's included: 1 truss-head machine screw (#8-32 x 3/16) Install notes:
- Disconnect power to the appliance before servicing
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Verify thread size and length match the original hardware
- If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$6.95
- Compare At:
-
$12.93
- You Save:
-
$5.98
Genuine Frigidaire part
By: Frigidaire
Part Number: 318053103
Length: Approx. 82 1/2"
Do-It-Yourself Stories from Customers like You
18 year old oven; works great but racks ugly/discolored and impossible to clean well enough; door seal flattened and discolored Cathryn S. • Breckenridge , CO • September 01, 2018
Bought two new racks - beautiful! Bought replacement door seal: watched simple video and installed new seal in less than 10 minutes. Extremely pleased and impressed with entire experience as a first-time customer.
Read more
More
$97.65
- Compare At:
-
$116.20
- You Save:
-
$18.55