Kenmore Wall Oven 790.48903000 (79048903000, 790 48903000) Parts

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

This is a replacement mounting screw used to secure panels, trim, and small components in compatible appliances. Installing the correct screw restores a secure fit and helps stop rattling or loose parts. What it does:

• Secures panels, brackets, trim pieces or small assemblies to the appliance frame
• Prevents parts from shifting, vibrating, or producing rattling noises when in place
• Replaces missing, worn, or stripped fasteners that cause loose doors or misaligned trim
• Works with the original mounting points and thread types used by the manufacturer

• Always disconnect power or unplug the appliance before servicing to avoid electrical hazard.
• Use the correct screwdriver or bit to avoid stripping the head; do not overtighten.
• Keep track of small parts and compare the new screw to the old one before installation.

This interior refrigerator lamp provides reliable lighting inside the fresh-food compartment so you can see contents clearly. It replaces a dim or non-working lamp to restore normal interior illumination. What it does:

• Provides interior lighting for the refrigerator compartment
• Replaces a burned-out, flickering, or intermittently working lamp
• Helps you find food and check expiration labels without opening the compartment longer than necessary
• Works with the existing lamp housing and socket when compatible

• One interior refrigerator lamp

• Disconnect power to the appliance before replacing the lamp to avoid electrical shock
• Allow the lamp and surrounding area to cool before handling
• Handle the lamp carefully to avoid breakage; dispose of broken bulbs per local regulations
• Check the socket and appliance light switch for faults if the lamp does not light after installation.

This replacement door hinge restores smooth, secure opening and closing for a refrigerator door. It replaces a worn or damaged hinge to help stop sagging, rubbing, or uneven gaps around the door. What it does:

• Supports the refrigerator door and maintains proper alignment
• Allows the door to pivot smoothly without sticking or binding
• Helps maintain a consistent door seal to prevent cold air leaks
• Commonly used when the door sags, scrapes the cabinet, or won't close fully

• Disconnect power to the appliance and remove food from the door area before starting
• Support the door while removing and installing the hinge to prevent damage or injury
• Typical installation requires basic hand tools (screwdriver, wrench); hardware may need loosening/tightening for alignment

This electronic control board regulates the appliance's functions and user interface so cycles and settings respond correctly. Replacing a faulty board restores reliable control and display operation when the original board has failed. What it does:

• Interprets user commands and sends signals to motors, valves, and other components
• Controls cycle timing, temperature, and other programmed functions
• Can cause loss of display, non-responsive buttons, or failure to start when defective
• May trigger erratic or unexpected operation if internal electronics fail

• One electronic control board as shown

• Disconnect power (unplug or switch off breaker) before beginning work
• Handle the board by its edges and avoid static discharge (use an anti-static wrist strap if available)
• Verify appliance model and part number match before installing

This replacement tension spring restores proper tension to the appliance's moving mechanism so doors, latches or linkages operate smoothly and reliably. It's a simple wearable part that helps fix sagging or loose motion. What it does:

• Provides tension for a door, latch or linkage to return to the correct position
• Helps stop door sag, uneven closing or loose movement
• Eliminates slack that can cause rattling or noisy operation
• Restores proper alignment so mechanical interlocks engage

• One tension spring

• Disconnect power and/or supply (unplug or shut off circuit) before starting
• Release stored tension carefully—use proper tools and eye protection
• Inspect mating parts (pins, clips, brackets) and replace if worn

This coupling connects the washer drive motor to the transmission to transfer power for agitation and spinning. Replacing a worn or broken coupling restores reliable drive engagement and reduces noise and slipping. What it does:

• Transfers motor rotation to the transmission so the drum agitates and spins
• Prevents metal-on-metal contact between motor and gearbox when intact
• Common symptom: washer won't agitate or spin, or slips under load
• Common symptom: loud grinding or clunking noises from the washer during cycle

• One coupling

• Disconnect power and water before servicing; follow the manufacturer's disconnection procedures
• Access may require removing the washer cabinet or front panel—refer to your model's service manual
• Inspect adjacent parts (motor mounts, shaft splines) for wear and replace as needed

A genuine-style refrigerator water filter cartridge that helps improve the taste and clarity of your drinking water by reducing common contaminants and particulates. Fits inline into the fridge's filter housing for regular water and ice use. What it does:

• Removes or reduces sediment and particles that can cause cloudy water and particles in ice
• Helps improve taste and odors from tap water
• Supports consistent water quality for drinking and ice production
• Can help prevent buildup that may affect dispenser performance

• Turn off the water supply and follow your refrigerator's instructions before removing the old filter
• Push/rotate to remove and install the replacement per the appliance's filter housing design
• Flush several cups of water through the dispenser after installation to clear air and carbon fines
• Inspect for leaks after installation and replace promptly if any leak is found

This control mounting lock secures the washer control or door latch area so the machine runs safely and reliably. It replaces a worn or broken mounting lock to restore proper control-panel or latch stability during cycles. What it does:

• Holds the washer control or latch assembly firmly in place to prevent movement and intermittent connections
• Helps maintain reliable electronic or mechanical engagement during start and spin cycles
• Common symptom: control panel or door area feels loose, intermittently unseated, or causes error codes related to a loose latch/control
• Prevents excess vibration or shifting of the control/latch that can lead to premature wear

• One control mounting lock

• Disconnect power and water before servicing to avoid shock or injury
• Access may require removing the cabinet or control panel; follow for safe disassembly
• Inspect surrounding clips and connectors; replace any damaged fasteners for a secure fit

The Control Board is an OEM component specially designed for Frigidaire wall oven/microwave combo units. Responsible for interfacing with electronic controls, it precisely manages cooking programs.  

Prolonged exposure to elevated microwave oven temperatures causes typical deterioration reducing functionality over many years. Baking flexibility suffers without responsive command processing.

Causes involve normal electronic component fatigue from heat exposure across thousands of cooking cycles. Impacts introduce abrupt damage risks.

Symptoms indicating board issues involve:

• Unresponsive touch controls and display errors  
• Failure to initiate preprogrammed cooking functions
• Inability to accurately monitor temperature or time

Replacing with this OEM Frigidaire board restores versatile touchscreen guidance. Compatibility also fits some Kenmore, Electrolux, and Gibson combos renewing advanced bake settings for consistent, hands-free results through authorized maintenance. 

This replacement lever restores a broken or worn lever used to operate the appliance mechanism, letting the related door, latch or control arm move and function properly. It's a direct-fit stamped/plastic lever designed for OEM fit and durable operation. What it does:

• Replaces a cracked, bent or missing lever to restore proper mechanical movement
• Helps re-engage door/latch or control linkage so the appliance can open, close or actuate normally
• Stops grinding, slipping or loose motion caused by a damaged lever
• Fits the original mounting points for straightforward replacement

• One replacement lever

• Install only after unplugging the appliance or switching off power at the breaker
• Verify correct orientation and engage any retaining clips or fasteners fully before testing
• Use basic hand tools; avoid over-tightening fasteners to prevent cracking the lever

This replacement cam helps position and guide the appliance door or control linkage for correct latch engagement and smoother operation. Fits where a small plastic/metal cam locates moving parts and transfers motion. What it does:

• Rotates or rocks with the hinge or actuator to engage the door latch or control lever
• Restores proper door alignment and latch engagement when the original cam is worn or broken
• Can reduce sticking, binding, or clicking noises at the hinge or latch area
• Commonly replaced when the door won't stay closed, is misaligned, or moves unevenly

• One cam (5304480641)

• Disconnect power before servicing and follow all safety precautions
• Access may require removing the door, trim, or control panel depending on model
• Inspect mating parts (hinge, latch, fasteners) for wear and replace if damaged
• Use correct fasteners and orientation; test operation before full reassembly

This is a #8 screw, 0.500 inch long, used to secure panels and components in appliances. It provides a correct-fit fastener for repairs where the original #8 x 1/2" screw was required, restoring proper assembly and stability. What it does:

• Fastens trim, panels, brackets and small components where a #8 x 1/2" screw is specified
• Holds parts securely to prevent rattling, gaps or loose panels
• Replaces worn, stripped or missing screws to restore proper fit
• Appropriate for common interior and exterior appliance mounting points

• Use the correct screwdriver (typically Phillips) and avoid over-tightening to prevent strip or damage
• Disconnect power and follow appliance manufacturer safety instructions when accessing internal parts

This hex flange nut secures components where a broader bearing surface is needed to resist loosening and distribute load. It fits 10-32 threaded studs and is used on fastened assemblies in appliances. What it does:

• Provides a secure threaded connection for 10-32 screws and studs
• Flange spreads clamping force to reduce panel or bracket damage
• Hex shape allows tightening with a wrench for a reliable hold
• Commonly replaces worn or missing nuts that cause loose panels or rattling

• One hex flange nut

• Use the correct 10-32 screw or stud and hand-start threads to avoid cross-threading
• Tighten with an appropriately sized wrench; do not overtighten to prevent thread or part damage
• Disconnect power and follow appliance safety instructions before servicing
• Replace only like-for-like; confirm size and thread match your application