Kenmore Range 790.78852605 (79078852605, 790 78852605) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509869
Leveling leg assembly installs at the front corners of your range. Replace if broken, rusted, missing, or no longer adjusts to level your appliance.
Do-It-Yourself Stories from Customers like You
No leveling leg on display model stove I purchased Stephen F. • Rutherfordton , NC • July 28, 2019
Bought new leveling leg. Took longer to lay the appliance on the side and pick back up, than to install leg.
Read more
More
$13.61
- Compare At:
-
$16.06
- You Save:
-
$2.45
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304498835
Replace your range oven door gasket to prevent heat escape and maintain proper temperature. Snaps into place with embedded clips. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
Was brok seal gasket and too old Ang T. • Garden Grove , CA • May 22, 2015
Easy just pull clip and put back
Read more
More
$78.95
- Compare At:
-
$93.16
- You Save:
-
$14.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 316575500
Frames your range's ventilation opening. Replace if cracked, discolored, or missing. Installs around vent area for a finished appearance.
Do-It-Yourself Stories from Customers like You
Kenmore oven plastic on door melted during cleaning cycle oven bottom cracked enamel Anna G. • Lake Zurich , IL • January 18, 2016
Had to order new plastic panel, scared to run the clean cycle again.
Read more
More
$79.53
- Compare At:
-
$95.44
- You Save:
-
$15.91
Genuine Frigidaire part
By: Frigidaire
Part Number: 318398302
Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.
Do-It-Yourself Stories from Customers like You
Oven won't turn on, control board failure convection motor failure Jonathan O. • Lorena , TX • November 12, 2018
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out.
Read more
More
$34.95
- Compare At:
-
$41.24
- You Save:
-
$6.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 316112005
Anti-tip bracket kit secures your range to the floor or wall, preventing tipping when the oven door is opened or heavy cookware is placed on extended racks.
Do-It-Yourself Stories from Customers like You
Missing anti tip bracket. Chip M. • Coconut Creek , FL • June 08, 2019
Installed the new bracket as per instructions with template enclosed and it was perfect.
Read more
More
$15.95
- Compare At:
-
$19.14
- You Save:
-
$3.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508926
Burner won't turn off or element light stays on? This range burner control switch regulates temperature and power. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
The control knob was orginal equipment but the switch installed by a sears tech was not and the knob eventually would not work the switch Kevin W. • Yucca Valley , CA • December 19, 2016
I went on your website found the parts needed to make the repairs. I watched the short video on installation. The parts arrived just a few days after I placed the order. I finished the repair in less than an hour and had to wait a few minutes to test the switch since the power was off and on due to a wind storm. Simple easy to do repair and I saved $90.00 on service fee for a tech to do the repair.
Read more
More
$62.95
- Compare At:
-
$75.54
- You Save:
-
$12.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303288565
This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.
- Fastens the switch body to a bracket or chassis panel
- Helps keep the switch aligned for consistent actuation
- Replaces stripped, corroded, or missing mounting hardware
- Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area
What's included: 1 truss-head machine screw (#8-32 x 3/16) Install notes:
- Disconnect power to the appliance before servicing
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Verify thread size and length match the original hardware
- If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$7.31
- Compare At:
-
$12.93
- You Save:
-
$5.62
Genuine Frigidaire part
By: Frigidaire
Part Number: 316008401
Size: 3/4 inch od x 1/4 inch id.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
$8.56
- Compare At:
-
$10.27
- You Save:
-
$1.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 316489401
Fix delayed oven ignition or gas odor with this spark electrode. Creates the spark that lights your oven burner. DIY repair in under 1 hour.
Do-It-Yourself Stories from Customers like You
The ignitor had gone out on our oven Jared P. • Stonewall , LA • August 09, 2015
We ordered a new ignitor and it came in two days just as promised. The only problem that we experienced was that the leads on the new ignitor were to short. We were able to find enough slack on the oven end to make it work. The oven is once again working great. The video was a little off on what need to be done to disconnect the ignitor. We actually had to flip the oven over to get to the bottom. We could not access the connector through the back.
Read more
More
$217.56
- Compare At:
-
$261.07
- You Save:
-
$43.51
Genuine Frigidaire part
By: Frigidaire
Part Number: 316021109
Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.
Do-It-Yourself Stories from Customers like You
Everything went great! Tiffanie H. • Ortonville , MI • January 12, 2016
Husband installed the glass and trim it looks great!
Read more
More
$20.70
- Compare At:
-
$22.73
- You Save:
-
$2.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304519024
Replace your gas range oven baffle if cracked, damaged, or missing. Directs heat circulation inside the oven cavity for even cooking performance.
Do-It-Yourself Stories from Customers like You
Impingement on oven baffle. Mitchell S. • Bronx , NY • June 25, 2019
Replaced oven baffle.
Read more
More
$59.95
- Compare At:
-
$71.34
- You Save:
-
$11.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 316404400
Replace a cracked, clogged, or damaged surface burner head on your gas range or cooktop. Restores proper gas distribution and flame pattern.
More
$76.54
- Compare At:
-
$91.08
- You Save:
-
$14.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 316237902
Burner orifice installs in the gas valve to control fuel flow to the cooktop burner. Replace if cracked, clogged, or when converting between LP and natural gas.
Do-It-Yourself Stories from Customers like You
Changing oven from lp to natural gas Kim G. • Prescott Valley , AZ • March 06, 2016
We bought a stove off Craigslist and didn't realize it was LP Gas until we got it home and my husband was hooking it up and the burners wouldn't light all the way around. My husband has been out of the gas company for over 10 years now and was a little rusty on what was happening. I jumped online and when I read that the possibility was because LP Gas, my husband said..."thats it." So we jumped online... on a Sunday and actually got a real person to chat with at AppliancePartsPros who told...
Read more
More
$51.95
- Compare At:
-
$62.34
- You Save:
-
$10.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 316136600
This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
Oven won't turn on, control board failure convection motor failure Jonathan O. • Lorena , TX • November 12, 2018
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out.
Read more
More
$14.44
- Compare At:
-
$17.04
- You Save:
-
$2.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 316445500
Oven light stays on or won't turn on when door opens? This door-activated switch restores automatic light control. Easy 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Oven door wouldn't lock & oven light stayed on Michael B. • Dubois , PA • November 26, 2015
Replaced light switch
Read more
More
$51.46
- Compare At:
-
$61.75
- You Save:
-
$10.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507348
This valve-to-regulator tube carries fuel between the pressure regulator and gas control valve, maintaining a sealed path for proper ignition and stable flame. Replace if the tube is kinked, damaged, or leaking.
- Provides a rigid, factory-formed connection between the pressure regulator and valve
- Helps ensure correct gas flow to the burner system
- Failure signs include weak or no flame, delayed ignition, repeated clicking, or a gas odor
- Visible kinks, corrosion, or stripped fittings indicate the tube should be replaced
What's included: 1 valve-to-regulator tube. Install notes:
- Disconnect power and shut off the gas supply; ventilate the area before servicing
- Use two wrenches to back up fittings; avoid twisting the regulator or valve bodies
- Route the tube without kinks and tighten flare connections securely
- Leak-test all joints with an approved solution—never an open flame—before restoring service.
Do-It-Yourself Stories from Customers like You
Gas leak. Carlos A. • New Bedford , MA • March 28, 2022
Replaced all the small tubing and gas regulator. All the parts fit perfectly.
Read more
More
$45.28
- Compare At:
-
$53.88
- You Save:
-
$8.60