Kenmore Washer 796.48852800 (79648852800, 796 48852800) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135699
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.
This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
Do-It-Yourself Stories from Customers like You
Broken spider assembly; aka washer drum shaft assembly Jeff J. • Los Angeles , CA • November 01, 2015
I followed Matt's awesome video from AppliancePartsPros.com to build up my "I can do this" reserves. But here's the story leading up to that point...
We purchased our Samsung WF419 on a “Black Friday” special November 2009 expecting to get some good years out of the washer/dryer pair. We don’t run more than 2 or 3 loads a week in the washer, so ours has had relatively little use over the beginning of its anticipated and expected long life-cycle. When the “thumping” started on the spin cycle a...
Read more
More
Genuine Lg part
By: Lg
Part Number: 5220FR2006H
The Water Inlet Valve Assembly is an OEM replacement part for LG washing machines, designed to control the flow of water into the laundry tub. This part is responsible for opening and closing to allow water into the wash drum at the appropriate times during the wash cycle, providing the correct water level and temperature.
Causes of a bad Water Inlet Valve Assembly can include mineral deposits blocking the valve, electrical failure preventing the valve from opening or closing properly, or physical damage to the valve mechanism itself.
Symptoms of a bad Water Inlet Valve Assembly include:
- Inadequate filling of the washer drum
- Water entering the drum when the washer is off
- Unusual noises during the fill cycle
- Water that is too hot or too cold, indicating a failure in valve operation that controls temperature
This OEM LG part can also be used on Kenmore/Sears appliances.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
-
Shuts off too soon
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg Bruce S. • Van Nuys , CA • December 13, 2015
Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward;
requires : 1 phillips screwdriver ~#2
1 needlenose plier, medium size
1 channel lock plier, medium size
1 marker pen
1 - cold water valve assembly # AP4445613
1 - hot water valve assembly #AP4441935
1 - water level pressure switch #AP4440713
an old towel or two for absorbing small amounts of water
a cellphone / camera for making sure you have the...
Read more
More
$48.44
- Compare At:
-
$59.79
- You Save:
-
$11.35
Genuine Lg part
By: Lg
Part Number: 383EER3001J
The Washing Machine Shock Absorber Kit is an OEM part for LG washing machines. This kit includes a shock absorber designed to reduce vibrations and absorb shocks during the wash cycle, providing stability and minimizing excessive movement.
Over time, the shock absorbers can wear out due to regular use, exposure to heavy or unbalanced loads, or damage from impact. These factors can lead to reduced effectiveness of the shock absorbers, causing increased vibrations and noise.
Symptoms of a bad shock absorber kit include:
- Excessive shaking or vibrating during the wash cycle
- Loud banging or thumping noises
- The washer moving or "walking" during operation
- Leaks due to increased stress on the tub and other components
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Lg washer: roaring bearings pump noises not draining properly and clogged hoses Albert W. • Germantown , MD • October 07, 2018
Our 10-year-old LG WM2487HWMA front load washer had gradually developed multiple problems. It sounded like a jet engine during high speed spin, both the drain pump and circulation pumps were noisy, it would not drain properly (water was coming in during spin cycle), no water was spraying out at the top of the door into the drum like it is supposed to when the circulation pump was running. It's amazing we had still been able to wash clothes at all! With the help of the excellent...
Read more
More
$40.78
- Compare At:
-
$48.94
- You Save:
-
$8.16
Genuine Lg part
By: Lg
Part Number: 5215ER2002G
The Drain Hose Assembly is an OEM part for LG washing machines. It is a component designed to transport used water from the washer to the drain. This flexible hose assembly ensures that water flows smoothly out of your washing machine after each cycle, preventing leaks and maintaining the efficiency of your appliance.
Causes for replacement can include wear and tear over time, clogs from lint or small items, kinks that restrict water flow, or damage from moving or improper installation.
Symptoms of a bad Drain Hose Assembly include:
- Water leaking from the back or bottom of the washing machine
- Difficulty draining water out of the washer
- Puddles of water forming around the appliance during or after operation
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drain hose was leaking on my lg washing machine Terry O. • Temecula , CA • June 12, 2014
I found a video, by another parts vendor, that showed in detail how to dismantle and repair the washer. I wouldn't have known how to even get to the problem without that repair video. Dismantling the washer was easy once I knew how, but would have been like a (litteral) Chinese puzzle without the video. Once I had cracked open the machine and identified the problem, the repair was easy.
I ordered from Appliance Parts Pros because they offered next-day delivery of parts. I had the washer back...
Read more
More
$34.54
- Compare At:
-
$41.10
- You Save:
-
$6.56
Genuine Lg part
By: Lg
Part Number: 3108ER1001B
The Pump Casing is an OEM replacement part for LG washing machines. It is a crucial component that houses the drain pump, which is responsible for removing water from the wash tub during the drain and spin cycles.
Symptoms of a need to replace the pump casing:
- Leaks or water seeping from the pump area
- Unusual noises or vibrations during the drain or spin cycles
- Pump failure or inability to drain water effectively
- Cracks or damage to the casing itself
Causes of a faulty pump casing can include physical impact or mishandling, excessive wear and tear over time, or potential manufacturing defects.
This OEM LG part is also compatible with Sears/Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
My lg washer quit draining and was showing error code oe Dan C. • Demotte , IN • June 05, 2016
I took it apart and found the drain pump motor had come apart. I found appliancepartspros.com and read the reviews for this company. Customers were very satisfied with the parts and service. I ordered the parts (at a savings of over 30% from my local appliance store) and had them in 2 days (YES TWO DAYS). Totally excellent service. Put the washer back together and it works like new. The repair was very easy to do myself and saved me well over $100. I recommend your company to every do it...
Read more
More
$37.58
- Compare At:
-
$44.34
- You Save:
-
$6.76
Genuine Lg part
By: Lg
Part Number: 2W20017E
The Outer Door Gasket Clamp is an OEM part for LG washing machines. It is designed to secure the outer door gasket, ensuring a tight seal between the door and the drum. This helps prevent water leaks during the wash cycle and maintains the efficiency of the washing machine.
Causes of a bad outer door gasket clamp can include regular wear and tear, damage from heavy use, or corrosion over time. A compromised clamp can lead to a loose gasket, resulting in water leaks and reduced washing machine performance.
Symptoms of a bad Outer Door Gasket Clamp include:
- Water leaking from the door area during wash cycles
- A loose or misaligned door gasket
- Difficulty in securing the door properly
- Visible rust or damage on the clamp
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Washer basket was loose banging/knocking when running eventually gave a 'load out of balance code" Dwayne D. • Hopewell Junction , NY • September 29, 2014
The repair was fairly straight foward as shown in the video. However, driving the shaft from the bearings took some doing. It required replacing the use of the board with a spare bolt and a 2lb hand sledge. (having an air hammer as reserve, also not a bad idea) I rated this reair as a "1" however I've been an auto mechanic for 40 years. If you do not have good general mechanical ablities you may find this more challenging as you get it further apart. I suggest anyone making this repair should...
Read more
More
$20.62
- Compare At:
-
$24.54
- You Save:
-
$3.92
Genuine Lg part
By: Lg
Part Number: 383EER2001A
The Pump Filter Assembly is an OEM replacement part for LG washing machines. It is a crucial component that filters out lint, debris, and other particles from the wash water, preventing them from recirculating and damaging the pump or other internal components.
Symptoms of a need to replace the pump filter assembly:
- Clogging or blockages, leading to poor drainage or water not draining completely
- Excessive buildup of lint, hair, or other debris in the filter screen
- Leaks or water seeping from the filter housing or surrounding area
- Unusual noises or vibrations during the drain or spin cycles, indicating a potential blockage
Causes of a faulty pump filter assembly can include excessive lint accumulation, damage to the filter screen or housing due to impact or mishandling, and general wear and tear over time.
This OEM LG part is also compatible with Sears/Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
Water was leaking around the filter cap on our lg front loading washer and flooded our laundry room John C. • The Villages , FL • May 12, 2015
Unscrewed the leaking filter and replaced with the new one. End of problem. Great service and prices at Appliance Parts Pros.com. This will be the first place I check whenever I need repair parts for any of our appliances in the future.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Lg part
By: Lg
Part Number: 5214FR4006G
The Drain Hose is an OEM part for LG washing machines. It is designed to carry used water from the washing machine to the household drain. This hose ensures that water is efficiently expelled from the washer, preventing any overflow or leakage issues.
Causes of a bad drain hose can include cracks or splits due to wear and tear, clogs from debris or residue buildup, and damage from mishandling or improper installation. Such issues can compromise the hose's ability to transport water effectively.
Symptoms of a bad Drain Hose include:
- Water leaks during or after the wash cycle
- The washer not draining properly
- Visible cracks or damage to the hose
- Unpleasant odors due to trapped debris or standing water
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
There was a hole in the tube to pump hose Gary M. • Watkinsville , GA • June 28, 2016
I replaced the Tube to pump hose which was very easy. I just tilted the washer on it side and replaced the Hose.
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Lg part
By: Lg
Part Number: 4861ER2001D
The Inner Door Gasket Clamp is an OEM part for LG washing machines. It secures the inner door gasket in place, ensuring a tight seal to prevent water leaks during the wash cycle. This clamp is essential for maintaining the efficiency and reliability of the washing machine by keeping the door gasket firmly in position.
Over time, wear and tear, exposure to water and detergent, or accidental mishandling can compromise the integrity of the clamp, leading to potential leaks.
Symptoms of a bad inner door gasket clamp include:
- Water leaking from the door area
- The door gasket not staying securely in place
- Visible damage or corrosion on the clamp
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Lg washer/dryer combo unit shook upper counter balance weight loose damaging the mount lugs on the tub cover and tore the tub gasket Christine V. • Saluda , VA • March 28, 2020
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back...
Read more
More
$37.58
- Compare At:
-
$45.10
- You Save:
-
$7.52
Genuine Lg part
By: Lg
Part Number: 4036ER2003A
The Lower Tub Seal is an OEM part for LG front-loading washing machines. It is located between the inner and outer tubs, creating a barrier to prevent water from leaking through the space between these two components.
Symptoms of a leaking lower tub seal include:
- Water stains or moisture accumulating on the outer tub surface
- Puddles of water found underneath the machine
- Excess vibration or noise from unbalanced water pressure
Failure can occur from mineral deposits obstructing the sealing surface over time. Cracks or tears in the seal material also compromise its leak-prevention ability.
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Washer started vibrating and smoking when spinning the door seal showed damage from the inner tub and the inner tub had a lot of up and down play in it Dan R. • Woodbine , IA • March 13, 2015
An online search for LG washing machine parts came up with a repair video from Appliance Parts Pros. I watched the video. It was very well done, very detailed, and took you step by step through the entire process to replace the tub bearings and the spider, from start to finish. After watching the video, I realized this repair was well within my abilities. No specialized tools were needed. I ordered the parts from Appliance Parts Pros, and all items were in stock and delivered within a couple...
Read more
More
$37.58
- Compare At:
-
$44.72
- You Save:
-
$7.14
Genuine Lg part
By: Lg
Part Number: 6201EC1006T
The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment.
Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter.
Symptoms of a bad Noise Filter Assembly include:
- Increased electrical noise or buzzing sounds emanating from the washer
- Intermittent disruptions in the washer's performance
- The washing machine failing to start or experiencing power fluctuations
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg washer would not turn on unplugging it allowed for one load but needed to be replunged each time Nieves O. • Sugar Land , TX • September 11, 2016
Searched the web and determined it was something called a noise filter. Ordered the part from ApplianceParts Pros. Received it in about 3 days, normal shipping. Replaced the part. Took about 15 minutes from start to finish. Problem solved. Cost less than $50.
Read more
More
$78.51
- Compare At:
-
$94.21
- You Save:
-
$15.70
Genuine Lg part
By: Lg
Part Number: 4036ER4001C
The Outer Tub Seal is an OEM part for LG washing machines. It provides a watertight seal between the outer tub and the tub cover, preventing water from leaking during the wash and spin cycles.
Causes of a bad outer tub seal can include wear and tear over time, exposure to harsh detergents, or damage from foreign objects that may enter the tub during washing. A compromised seal can lead to water leakage, which can cause further damage to the washing machine and the surrounding area.
Symptoms of a bad outer tub seal include:
- Water leaking from the bottom of the washing machine
- Mold or mildew growth around the seal
- Excessive moisture in the area surrounding the washer
- Unusual noises during the wash or spin cycles
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Washer started vibrating and smoking when spinning the door seal showed damage from the inner tub and the inner tub had a lot of up and down play in it Dan R. • Woodbine , IA • March 13, 2015
An online search for LG washing machine parts came up with a repair video from Appliance Parts Pros. I watched the video. It was very well done, very detailed, and took you step by step through the entire process to replace the tub bearings and the spider, from start to finish. After watching the video, I realized this repair was well within my abilities. No specialized tools were needed. I ordered the parts from Appliance Parts Pros, and all items were in stock and delivered within a couple...
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Lg part
By: Lg
Part Number: 4738ER2002A
The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.
Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.
Symptoms of a bad vent hose include:
- Excessive moisture or condensation inside the washer
- Musty odors from the washing machine
- Visible cracks or holes in the hose
- Poor ventilation leading to inefficient washing cycles
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Water leaking from my front load washing machine Donald H. • Tustin , CA • July 03, 2015
Removed the top cover while the machine was operating, located the source of the leak. The top filler tube had worn a hole in a flex point. Found the right part on this site, replaced it with little effort. While in there I saw a similar hose and decided to replace it as its time was probably up too. So far so good, washing clothes and no leaks!! Great prices and best of all the right parts were delivered in a timely manner. Thanks for making this so easy. Only specialty tool used was hose...
Read more
More
$44.71
- Compare At:
-
$53.20
- You Save:
-
$8.49
Genuine Lg part
By: Lg
Part Number: 4861FR3068A
The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.
Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.
Symptoms of a bad clamp include:
- Water leaking from hose connections
- Hoses coming loose or detaching during operation
- Visible rust or damage on the clamp
- Poor water flow or pressure issues
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad bearings seal and spider David R. • Jacksonville , FL • February 04, 2017
If your LG Front load washers sounds like a freight train, STOP USING IT. You're doing more damage and will need more parts to fix it.
After the noise became unbearable, I began to explore and disassemble. I knew enough to know the bearings must be bad but had never done this repair before. ( I am however pretty mechanically inclined.)
Watch this video before you start tearing your LG apart. APP did a great job explaining the steps of the repair. Do a search on this site or youtube.com with...
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Lg part
By: Lg
Part Number: 4040FR4051C
The Motor Rotor Bolt is an OEM part for LG washing machines. It secures the rotor to the motor shaft, playing a crucial role in the efficient functioning of the motor and ensuring the washer drum spins correctly during wash cycles.
Causes of a bad motor rotor bolt can include wear and tear from prolonged use, corrosion due to exposure to moisture, or damage from over-tightening or accidental impacts. A faulty motor rotor bolt can compromise the stability of the motor, leading to various operational issues.
Symptoms of a bad motor rotor bolt include:
- The washer drum not spinning or spinning irregularly
- Unusual noises during operation, such as banging or clunking
- The washer failing to complete cycles or stopping mid-cycle
- Visible wear or damage to the bolt or surrounding components
This OEM LG part is also compatible with Sears/Kenmore models.
More
$15.95
- Compare At:
-
$18.82
- You Save:
-
$2.87
Genuine Lg part
By: Lg
Part Number: 4930FR3040A
The Suspension Spring Holder is an OEM part for LG washing machines. This holder supports the suspension springs that help stabilize the washer drum during operation, reducing vibration and movement. It plays a critical role in ensuring smooth and quiet operation of the washing machine.
Over time, the suspension spring holder can become worn or damaged due to regular use, heavy loads, or accidental impacts. Causes of a bad suspension spring holder include wear and tear, physical damage, or corrosion from moisture exposure.
Symptoms of a bad suspension spring holder include:
- Excessive vibration or shaking during wash cycles
- Unusual noises, such as banging or clunking
- The washer drum appearing misaligned or sagging
- The washing machine moving or walking during operation
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Lg washer was rocking really badly and the drum was hitting the sides during every spin cycle and even coming off the top spring mount Benjamin M. • Lynchburg , VA • January 18, 2016
Replaced all three dampers and then replaced locking gaskets for the top spring mounts for the drum, replaced the old feet pads I had and works like a charm!
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39