Kenmore Dryer 970.C8003200 (970C8003200, 970 C8003200) Parts

Secures wiring harness to prevent chafing and maintain safe wire routing in washers, dryers, and laundry appliances. Replace if loose or broken. Check your model for compatibility.

White plastic dome plug insert for dryer. Covers exposed holes on dryer cabinet where pedestal or stacking kit was removed. Replaces missing or broken plugs.

White top panel for stackable dryers. Replaces cracked, damaged, or discolored panels. Installs on top of dryer unit to restore appearance and protect.

Replaces a worn, dented, or rusted dryer drum to restore smooth tumbling. Galvanized back construction. Ensures clothes move and dry evenly inside.

Hex washer head ,10-32 x 0.375. Ground

Secures the blower housing in your dryer. Replace if broken, loose, or causing rattling noises during operation. Verify fit with your model number.

Insulation pad that protects components near the dryer heating element. Replace if cracked, burned, singed, or missing to maintain proper heat shielding.

Installation and care guide manual for your dryer. Replace lost, damaged, or missing instruction booklets to ensure proper setup and maintenance.

This operator's instruction sheet provides the original printed user guidance for safe operation and basic use of your appliance. Clear, OEM-style instructions help you find controls and follow recommended operating steps. What it does:

• Lists control names and basic operating steps to help you use the appliance correctly
• Shows safety and care instructions to reduce user error and unsafe operation
• Provides quick-reference guidance that supplements the full manual
• Helpful when the original paperwork is missing, damaged, or unreadable

• No electrical or mechanical installation required; place the sheet near the appliance or inside the paperwork envelope
• Keep the sheet dry and free of grease to preserve legibility
• Do not place loose inside oven cavity; store with manuals or in a nearby drawer
• If replacing a damaged sheet, verify you have the correct version for your appliance's control layout

Secures and protects your dryer's power cord connection from strain and damage. Replace if cracked, broken, or cord becomes loose. Verify fit with your model.

The Front Felt Glide Assembly is an OEM part for Frigidaire dryers. This part allows smooth operation of the dryer drum, providing a felt pad that the drum glides on as it rotates. This not only helps to support the drum but also minimizes friction and noise, contributing to the efficient and quiet operation of the dryer. 

Over time, the felt portion of the glide assembly can wear down, leading to increased friction between the drum and the dryer's front panel.  

Symptoms of a bad Front Felt Glide Assembly include:

• Unusual noises during operation, such as squeaking or grinding
• The dryer drum may catch or hesitate during rotation
• Increased wear and tear on clothing due to the drum's rough movement
• The dryer may take longer to dry clothes efficiently due to the drum's impaired rotation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Motor is an OEM part for Frigidaire dryers. It is responsible for driving the drum rotation in the dryer, allowing for the tumbling and drying of clothes. It converts electrical energy into mechanical motion, providing the necessary power to spin the drum and circulate air for efficient drying.

Causes of a faulty dryer motor can include wear and tear over time, electrical malfunctions, or physical damage. These factors can result in issues such as the drum not spinning, unusual noises during operation, or the dryer not heating properly.

Symptoms of a bad dryer motor may include:

• The drum not rotating or spinning
• Unusual grinding or squealing noises while the dryer is in use
• Dryer not generating heat or insufficient drying performance

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Lower Front Felt Seal is an OEM part for Frigidaire dryers. This seal prevents hot air from escaping the dryer drum, ensuring optimal drying efficiency and preventing heat loss. It also helps reduce noise and vibration during operation.

Causes of a faulty lower front felt seal can include wear and tear over time, damage from foreign objects or excessive heat, or adhesive failure. These factors can result in air leakage, increased drying time, or excessive lint buildup.

Symptoms of a front felt seal may include:

• Air leakage around the dryer door or front panel
• Excessive lint accumulation near the dryer opening
• Unusual noises or vibrations during the operation

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Note: For the Hi-Temp Adhesive, order part number 5308027429. Additional parts to check are the rear drum bearing kit 5303281153 and the front felt glide assembly 5303937139.