Lg Dryer 79671622310 Parts
Genuine Lg part
By: Lg
Part Number: 6631EL3003B
Dryer won't auto dry or cycles run too long? This moisture sensor wire harness connects sensor bars to control. Restores accurate dry cycles. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Lg dryer (12 yrs old) would dry for a while on any heat setting then shut completely off stay off no power complete black out then after 20 30 minutes come back on George C. • Kingwood , TX • August 30, 2015
I spoke with the experts at parts pro and they suspected the main power board. I ordered the main power board along with the control panel. Since I was taking everything apart I decided to replace other components as well- thermostats, thermistor , sensor wire. When I was all done the old LG was back to working like new. Oh while I was at it I cleaned and vacuumed out the complete machine. Great factory parts, videos p, service and videos, the price of all the parts was less than a repair...
Read more
More
$29.48
- Compare At:
-
$35.38
- You Save:
-
$5.90
Genuine Lg part
By: Lg
Part Number: 5209EL1001L
Internal exhaust duct assembly that channels hot air between dryer components. Replace if cracked, rusted, burned, or causing stains on clothing.
Do-It-Yourself Stories from Customers like You
Hot air duct in lg dlg3788w dryer had buildup of melted fibers/fabric that was causing stains/streaks on clothing Alvin A. • Las Vegas , NV • November 13, 2016
Https://www.appliancefactoryparts.com/content/pdfs/125631-1.pdf has the details to disassemble the dryer to access the vent part that cost apx$28. 1.5 hrs and some patience along with a screw driver and players was alll it took to to remove the cover, control panel, front cover, drum, belt, gas line and manifold assembly, flame tube? And rear drum panel in order to replace worn part. Reassembled in 15minutes to clean and vacuumed dryer. Works great now.
Read more
More
$95.95
- Compare At:
-
$115.14
- You Save:
-
$19.19
Genuine Lg part
By: Lg
Part Number: 6501EL3001A
The Igniter Sensor is an OEM part for LG dryers. This sensor plays a critical role in the ignition process, ensuring that the gas ignites properly to produce the heat necessary for drying clothes efficiently. It helps monitor and regulate the ignition temperature.
Over time, the igniter sensor can become faulty due to regular use, exposure to high temperatures, or electrical issues. These factors can lead to a malfunction, resulting in the dryer not heating properly or failing to start.
Symptoms of a bad igniter sensor include:
- Dryer not heating up
- Long drying times
- Dryer not starting
- Unusual smells or noises during operation
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Dryer started gas line good won't heat early model no codes Timothy M. • Roaring Spring , PA • November 25, 2016
Used video and took apart dru, this was extremely helpful. I bypassed the belt and door switch. Tested gas valves (gas disconnected) with multimeter. Found that the igniter worked the first gas valve, but the second gas valve would not open and the igniter would stay on. Found a flow chart online that shows the flame detect turns on causing the gas to turn on and shuts off the igniter. I replaced it and tested again. Igniter turns on, shuts off, then power to the second gas valve turns...
Read more
More
$138.95
- Compare At:
-
$165.35
- You Save:
-
$26.40
Genuine Lg part
By: Lg
Part Number: 5835EL1002A
Fix loud banging, grinding noise, or poor drying performance with a new dryer blower wheel. Restores proper airflow through drum and exhaust vent.
This part fixes the following symptoms
-
Too hot
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer would start then quit after about 5 seconds. No error codes-timer running nasal burnt smell. Larry T. • Morristown , TN • December 10, 2017
I replaced the dryer motor. I followed the repair video on the Appliance Parts Pro site, with a few modifications to the procedure. I loosened the control panel and flipped it forward to improve access to the wiring connectors. I also loosened the front panel and tipped it forward before disconnecting the door switch as there wasn't enough space to disconnect the switch otherwise. Removal of the blower assembly required the use of penetrating lubricant as the assembly was stuck on the motor...
Read more
More
$84.95
- Compare At:
-
$101.94
- You Save:
-
$16.99
Genuine Lg part
By: Lg
Part Number: 4432EL1002A
The Dryer Drum Baffle is an OEM part for LG dryers. This baffle is attached to the inside of the dryer drum and is designed to help lift and tumble clothes during the drying cycle.
Causes of a bad dryer drum baffle can include wear and tear from regular use, physical damage from heavy or sharp objects, or becoming loose due to vibration over time.
Symptoms of a bad dryer drum baffle include:
- Thumping or banging noises during the drying cycle
- Clothes not tumbling properly, leading to uneven drying
- Loose or rattling baffle inside the drum
- Visible damage or breakage on the baffle
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
The lifter inside the dryer had come off Amanda G. • Tomball , TX • December 29, 2019
Watched appliance parts pros YouTube video of how to get access and how to replace the broken part.
Read more
More
$38.69
- Compare At:
-
$46.43
- You Save:
-
$7.74
Genuine Lg part
By: Lg
Part Number: 4930EL2003B
This is a mounting holder or grille that secures the moisture sensor bars inside the dryer drum area. The moisture sensor detects how wet the clothes are and signals the control board to end the cycle when they're dry. Replace this holder if it is cracked, broken, or missing, which can cause the sensor bars to be misaligned and lead to clothes coming out still damp or the dryer running too long.
Do-It-Yourself Stories from Customers like You
Sheets broke cover guide with filter and sensor Stefan H. • Ponte Vedra Beach , FL • March 15, 2019
I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here.
Dryer is fixed, I'm happy.
Read more
More
$29.48
- Compare At:
-
$34.79
- You Save:
-
$5.31
Genuine Lg part
By: Lg
Part Number: AGM30063309
This is the gas valve assembly that controls the flow of gas to the burner in a gas dryer. It includes the solenoid coils and valve body that open and close to regulate gas delivery for heating. Replace this assembly if your gas dryer runs but produces no heat, heats intermittently, or if the gas igniter glows but the gas never ignites.
Do-It-Yourself Stories from Customers like You
Burner would turn off after a few seconds Steve R. • Canyon Country , CA • June 27, 2014
After watching the video, I replaced the gas valve.
Read more
More
$265.36
- Compare At:
-
$318.43
- You Save:
-
$53.07
Genuine Lg part
By: Lg
Part Number: 3750EL0001C
Stationary platform that sits inside the dryer drum to hold shoes, delicates, and other items in place during air drying. Replaces damaged or missing racks.
Do-It-Yourself Stories from Customers like You
No problem new lg dryer did not come with a drying rack Michael M. • Laguna Niguel , CA • November 25, 2016
Ordered the drying rack specified by part number in the LG Dryer Owner's Manual from AppliancePartsPros.
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Lg part
By: Lg
Part Number: 4970EL4002C
Distortion spring that applies tension within the dryer mechanism. Replace if fatigued, broken, or missing to restore proper tension and assembly function.
More
$10.70
- Compare At:
-
$11.77
- You Save:
-
$1.07
Genuine Lg part
By: Lg
Part Number: 3550EL2001A
This is a translucent plastic lens that covers the drum light inside the dryer. It protects the light bulb from heat, lint, and tumbling clothes while allowing light to illuminate the drum interior. Replace this cover if it is cracked, yellowed, melted, or missing, which can leave the bulb exposed to damage.
Do-It-Yourself Stories from Customers like You
Lamp cover broke at the screw head. Justin D. • Aurora , CO • June 28, 2023
Replaced the part with the one ordered.
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Lg part
By: Lg
Part Number: 4948EL4001B
For propane order 383EEL3002A.
Do-It-Yourself Stories from Customers like You
Dryer was setup for propane very dangerous when connected to natural gas dryer was exhibiting low to no heat with a very pronounced presence of a strong raw gas smell Robert R. • Houston , TX • May 04, 2015
I ordered the natural gas conversion orifice with 2 day shipping, I also ordered for only maintenance reasons a new ignitor, as they are very common wear and tear item (like a spark plug on a gas engine or a glow plug on a diesel engine ). Both items came promptly and well protected . Easy install, only needed a Phillips screwdriver for entire repair. R&R top first, r&r front display panel,r&r door,r&r front panel,r&r drum (very easy), replaced ignitor and orifice. Total job took 30 min. I...
Read more
More
$36.95
- Compare At:
-
$44.34
- You Save:
-
$7.39
Genuine Lg part
By: Lg
Part Number: 3550EL2004B
Replacement filter cover that secures your dryer's lint filter inside its housing. Installs quickly to replace a cracked, broken, or missing cover.
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Lg part
By: Lg
Part Number: 383EEL9001G
This is a fastener and retainer assembly that secures the blower wheel to the motor shaft inside a dryer. It keeps the blower wheel firmly in place so it can properly circulate hot air through the drum and out the exhaust vent. Replace this assembly if the blower wheel wobbles, makes rattling or squealing noises, or if the retainer nut is stripped or broken, causing poor airflow and longer drying times.
Do-It-Yourself Stories from Customers like You
Roller seized Pete A. • Carrollton , GA • September 01, 2020
Replaced roller.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Lg part
By: Lg
Part Number: 4778EL3001B
This adjustable leveling leg screws into the dryer base to support and stabilize the cabinet. Replacing a worn or missing foot helps level the appliance, reduce vibration and noise, and keep it steady on uneven floors.
- Provides threaded height adjustment to properly level the dryer
- Stabilizes the cabinet to minimize rocking, vibration, and walking
- Replaces a broken, worn, or missing foot
- Common symptoms: dryer wobbles, is hard to level, or makes rattling/vibration noise
What's included: 1 adjustable leveling leg Install notes:
- Disconnect power; shut off gas supply for gas models
- With a helper, carefully tilt or raise the dryer for access
- Unscrew the old leg; thread the new leg into the base by hand, then adjust with a wrench until the dryer sits level and stable
- Ensure all legs contact the floor and the dryer does not rock
Do-It-Yourself Stories from Customers like You
Lpg conversion Alan H. • Chestertown , MD • December 03, 2016
Changed orifice
Read more
More
$10.98
- Compare At:
-
$11.46
- You Save:
-
$0.48
Genuine Lg part
By: Lg
Part Number: AGB34327803
Directs steam spray into the dryer drum during Steam/Refresh cycles. Replace if nozzle is clogged, cracked, or leaking to restore proper mist distribution.
More
$31.95
- Compare At:
-
$38.34
- You Save:
-
$6.39
Genuine Lg part
By: Lg
Part Number: 1SZZEL3001A
This replacement screw secures appliance components in their proper position. Use it to restore a tight, rattle-free fit when the original fastener is missing, stripped, or corroded. What it does:
- Fastens brackets, panels, or trim to keep assemblies aligned and secure
- Helps prevent vibration, rattling, and gaps from loose hardware
- Restores proper attachment when a screw is lost, worn, or damaged
- Common symptoms: loose panel/handle, misalignment, rattling, or a missing screw
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas before service
- Match location to the original; start threads by hand to avoid cross-threading
- Use the correct driver bit; do not overtighten (especially into plastic)
- If the original hole is stripped, repair threads before installing the new screw
Do-It-Yourself Stories from Customers like You
Dryer not spinning Brett B. • Durham , NC • June 23, 2025
Replaced idler pulley, screw, and dryer belt after completely disassembling the dryer
Read more
More
$10.70
- Compare At:
-
$11.77
- You Save:
-
$1.07