Lg Dryer DPGT750EC1PL Parts
Genuine Lg part
By: Lg
Part Number: 6931EL3003D
The Hi Limit Thermal Fuse is an OEM part for LG dryers. This fuse is a safety device that protects the dryer from overheating by cutting off power to the heating element if the dryer’s temperature exceeds a safe limit. It ensures that the dryer operates within safe temperature ranges, preventing potential fire hazards.
Replace the hi limit thermal fuse if it becomes faulty due to wear and tear, a buildup of lint, or exposure to high temperatures over time. A malfunctioning fuse can compromise the dryer’s ability to regulate heat properly.
Symptoms of a bad hi limit thermal fuse include:
- The dryer not heating
- The dryer shutting off unexpectedly during a cycle
- No response from the dryer when attempting to start a cycle
- Extended drying times due to lack of heat
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Lg dryer no heat Jeffrey J. • Emerald Isle , NC • June 06, 2016
Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same...
Read more
More
$19.31
- Compare At:
-
$22.98
- You Save:
-
$3.67
Genuine Lg part
By: Lg
Part Number: 4581EL2002L
The Roller Kit is an OEM part for LG dryers. This 4 roller kit includes replacement drum support rollers, which are essential for allowing the dryer drum to rotate smoothly during operation. The rollers are designed to provide stable support for the drum, minimizing noise and ensuring efficient drying performance.
Over time, drum rollers can wear out due to continuous use, exposure to heavy loads, or lack of proper lubrication. When the rollers become damaged or worn, they may develop flat spots, lose their smooth surface, or begin to squeak. These issues can lead to improper drum rotation or increased strain on other dryer components.
Symptoms of a bad Roller Kit include:
- Loud squeaking, rumbling, or thumping noises during operation
- The dryer drum not spinning or rotating unevenly
- Excessive vibrations while the dryer is running
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Lg dryer was making a banging and screaching sound bought new roller wheels Chuck V. • Macomb , MI • January 11, 2015
I consulted with the internet and your website and determined I had a bad roller wheel. I was going to buy just one but determined if you have to take the thing apart, just replace all of them. These lasted 10 years after all. Opened up You Tube for the method to take the dryer apart. After doing the washer last year, I felt pretty bold and just ripped into the project. Within 30 minutes I had the drum out and located the problem wheel ( rear right side). It was locked up due to hair build up...
Read more
More
$138.95
- Compare At:
-
$165.35
- You Save:
-
$26.40
Genuine Lg part
By: Lg
Part Number: 4400EL2001F
The Belt is an OEM replacement part for LG dryers that is responsible for connecting the motor to the drum to allow it to tumble. Over time, dryer belts can stretch, wear out, or even break, leading to a drum that won't turn and clothes that don't dry properly.
Symptoms of a bad Dryer Belt include:
- The dryer motor running but the drum not turning.
- A squealing or thumping noise coming from the dryer.
- The dryer not starting at all.
Causes of failure can include regular wear and tear from the dryer's operation, overloading the dryer beyond its capacity, which puts extra strain on the belt, or a misalignment that causes uneven wear. A damaged belt can prevent your dryer from functioning correctly, leading to inefficiency in drying clothes and potential motor damage due to unnecessary strain.
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Lg dryer dle5799b would start shutting down while drying after cooling down for a while it would start again and shut down after a few minutes; smelled like it was overheating Robert N. • Issaquah , WA • March 12, 2016
I disassembled/reassembled the dryer according to the ApplianceParts Youtube video. With my limited electrical knowledge (just enough to be dangerous) I initially figured it was a problem with the heating unit, sensor(s), or the control board. After diagnosing the problem (bad thermistor), I had to order the parts and was able to repair and reassemble the dryer several days later. After removing the drum, I cleaned all the dust etc. out of the inside (it gets dirty in there!) and inspected,...
Read more
More
$35.95
- Compare At:
-
$42.42
- You Save:
-
$6.47
Genuine Lg part
By: Lg
Part Number: 3550EL1005C
Note: Does not include moisture sensor bars. For the moisture sensor bars, order 2 of part# 6500EL3001A.
The Guide Cover is an OEM part for LG dryers. The part allows dust and debris to exit the dryer drum while preventing small clothing items from slipping through.
Causes of a bad Guide Cover can include accumulation of lint and debris that can restrict airflow, physical damage from handling or excessive use, and general wear that can compromise the fit and effectiveness of the cover.
Symptoms of a bad Guide Cover include:
- Increased drying times due to poor airflow.
- Unusual noises from lint hitting the fan or other components.
- Overheating of the dryer.
- Visible damage or misalignment of the cover that affects performance.
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Sheets broke cover guide with filter and sensor Stefan H. • Ponte Vedra Beach , FL • March 15, 2019
I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here.
Dryer is fixed, I'm happy.
Read more
More
$21.46
- Compare At:
-
$25.75
- You Save:
-
$4.29
Genuine Lg part
By: Lg
Part Number: 5231EL1001C
Dryer lint filter screen traps lint and debris during drying cycles. Replace if cracked, damaged, or lost to maintain airflow and efficiency.
Do-It-Yourself Stories from Customers like You
The dryer filter developed a crack in the frame Gloria K. • Ocala , FL • November 21, 2017
I purchased a new replacement.
Read more
More
$34.75
- Compare At:
-
$41.70
- You Save:
-
$6.95
Genuine Lg part
By: Lg
Part Number: 4036EL3001A
Replace your dryer drum seal when clothes take longer to dry or you notice lint buildup. Maintains heat efficiency and prevents air leaks. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Lg dryer making loud noises Michael B. • Dublin , OH • January 07, 2017
From reading "troubleshooting" sites on the internet, originally thought I'd be replacing the front & rear drum rollers, so I ordered the rollers, and a new belt before I opened up the dryer, taking it out of use. When I opened it up the front rollers were "shot", and the front bulkhead was "totaled". Waited for parts to arrive (within 2 days), and successfully replaced front & rear rollers, bulkhead, drum seal. The on-line videos really helped me ensure I was keeping in the right order. My...
Read more
More
$45.30
- Compare At:
-
$53.91
- You Save:
-
$8.61
Genuine Lg part
By: Lg
Part Number: 4560EL3001A
Idler pulley maintains tension on the dryer belt. Replace if worn, cracked, or causing belt slippage. Installs between motor and drum support system.
Do-It-Yourself Stories from Customers like You
Dryer was squeaking on start up and rumbling noise while running. Gene L. • Redmond , WA • December 01, 2020
I have an LG dryer purchased in 2007. Model: DLE9577SM. It was squeaking at start-up and rumbling a little. Not knowing what parts I would actually need, I ordered rollers with/without assemblies, tensioner pulley-only, new belt. After viewing this video a couple of times, I attacked my machine which is located in the comfort of my garage. Lots of room to spread out. Nice. This disassembly went OK however because, I suspect, my machine is 13 years old, the removal of the control panel was...
Read more
More
$30.54
- Compare At:
-
$36.04
- You Save:
-
$5.50
Genuine Lg part
By: Lg
Part Number: EBF61496102
This safety interlock assembly secures the washer door and signals the control when it's safe to run a cycle. Replacing a faulty unit helps restore proper locking and start functions to prevent interruptions and error codes.
- Locks the washer door and confirms it is closed to allow the cycle to start
- Sends door-closed/locked status to the control throughout the cycle
- Helps prevent the door from opening during spin or when water is present
- Common symptoms: won't start, won't lock/unlock, door error (dE) messages, cycle stops mid-wash
What's included: One safety switch assembly as shown. Install notes:
- Disconnect power before servicing; wear cut-resistant gloves
- Access the lock at the door opening; remove the mounting screws and disconnect the harness
- Transfer connectors to the new assembly, align, and secure without overtightening
- Ensure the door strike aligns smoothly with the new lock before testing
Do-It-Yourself Stories from Customers like You
Dryer would not come on Leroy L. • San Francisco , CA • December 28, 2014
Bought a new switch assembly, watched the video, and replaced the switch. Thr dryer now runs fine. Replacement part matched esxactly.
Read more
More
$47.41
- Compare At:
-
$55.94
- You Save:
-
$8.53
Genuine Lg part
By: Lg
Part Number: 5835EL1002A
Fix loud banging, grinding noise, or poor drying performance with a new dryer blower wheel. Restores proper airflow through drum and exhaust vent.
This part fixes the following symptoms
-
Too hot
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer would start then quit after about 5 seconds. No error codes-timer running nasal burnt smell. Larry T. • Morristown , TN • December 10, 2017
I replaced the dryer motor. I followed the repair video on the Appliance Parts Pro site, with a few modifications to the procedure. I loosened the control panel and flipped it forward to improve access to the wiring connectors. I also loosened the front panel and tipped it forward before disconnecting the door switch as there wasn't enough space to disconnect the switch otherwise. Removal of the blower assembly required the use of penetrating lubricant as the assembly was stuck on the motor...
Read more
More
$84.95
- Compare At:
-
$101.09
- You Save:
-
$16.14
Genuine Lg part
By: Lg
Part Number: 3750EL0001C
Stationary platform that sits inside the dryer drum to hold shoes, delicates, and other items in place during air drying. Replaces damaged or missing racks.
Do-It-Yourself Stories from Customers like You
No problem new lg dryer did not come with a drying rack Michael M. • Laguna Niguel , CA • November 25, 2016
Ordered the drying rack specified by part number in the LG Dryer Owner's Manual from AppliancePartsPros.
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Lg part
By: Lg
Part Number: 5209EL1006A
Duct assembly channels air from dryer drum to blower and exhaust. Replace if cracked, warped, or missing to restore proper airflow and prevent lint bypass.
Do-It-Yourself Stories from Customers like You
Missing piece Rick D. • Waverly , TN • October 02, 2015
Stuck it on
Read more
More
$53.21
- Compare At:
-
$62.79
- You Save:
-
$9.58
Genuine Lg part
By: Lg
Part Number: 3550EL2001A
The Cover, Lamp is an OEM part for LG dryers. This component covers and protects the interior lamp inside the dryer, ensuring it stays secure and free from damage while providing illumination inside the drum.
Over time, the lamp cover can become cracked or damaged due to the high temperatures and vibrations within the dryer. It is essential to replace a faulty lamp cover to maintain the proper lighting and protection for the lamp.
Symptoms of a bad lamp cover include:
- The interior lamp not staying in place
- Visible cracks or damage on the cover
- Reduced or blocked light inside the dryer drum
- The cover falling off or becoming loose
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lamp cover over the light in dryer was broken Lynn W. • Mcalester , OK • November 02, 2018
Replaced the lamp cover inside dryer. That covers the light.
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Lg part
By: Lg
Part Number: 4970EL4002C
Distortion spring that applies tension within the dryer mechanism. Replace if fatigued, broken, or missing to restore proper tension and assembly function.
More
$10.70
- Compare At:
-
$11.77
- You Save:
-
$1.07
Genuine Lg part
By: Lg
Part Number: 3550EL3002A
Protective cover shields internal wiring and electrical terminals in your dryer. Replace if cracked, broken, or missing to prevent accidental contact.
More
$10.70
- Compare At:
-
$11.77
- You Save:
-
$1.07
Genuine Lg part
By: Lg
Part Number: 4778EL3001B
This adjustable leveling leg screws into the dryer base to support and stabilize the cabinet. Replacing a worn or missing foot helps level the appliance, reduce vibration and noise, and keep it steady on uneven floors.
- Provides threaded height adjustment to properly level the dryer
- Stabilizes the cabinet to minimize rocking, vibration, and walking
- Replaces a broken, worn, or missing foot
- Common symptoms: dryer wobbles, is hard to level, or makes rattling/vibration noise
What's included: 1 adjustable leveling leg Install notes:
- Disconnect power; shut off gas supply for gas models
- With a helper, carefully tilt or raise the dryer for access
- Unscrew the old leg; thread the new leg into the base by hand, then adjust with a wrench until the dryer sits level and stable
- Ensure all legs contact the floor and the dryer does not rock
Do-It-Yourself Stories from Customers like You
Lpg conversion Alan H. • Chestertown , MD • December 03, 2016
Changed orifice
Read more
More
$10.98
- Compare At:
-
$11.56
- You Save:
-
$0.58
Genuine Lg part
By: Lg
Part Number: 1SZZEL3001A
This replacement screw secures appliance components in their proper position. Use it to restore a tight, rattle-free fit when the original fastener is missing, stripped, or corroded. What it does:
- Fastens brackets, panels, or trim to keep assemblies aligned and secure
- Helps prevent vibration, rattling, and gaps from loose hardware
- Restores proper attachment when a screw is lost, worn, or damaged
- Common symptoms: loose panel/handle, misalignment, rattling, or a missing screw
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas before service
- Match location to the original; start threads by hand to avoid cross-threading
- Use the correct driver bit; do not overtighten (especially into plastic)
- If the original hole is stripped, repair threads before installing the new screw
Do-It-Yourself Stories from Customers like You
Dryer not spinning Brett B. • Durham , NC • June 23, 2025
Replaced idler pulley, screw, and dryer belt after completely disassembling the dryer
Read more
More
$10.70
- Compare At:
-
$11.77
- You Save:
-
$1.07