Need Help?
Call
The Switch, Micro is an OEM part for LG microwaves. This micro switch is crucial for the operation of the microwave door mechanism, ensuring that the microwave only operates when the door is securely closed.
Causes of a bad micro switch can include wear and tear from frequent use, damage due to electrical faults, or physical impact that disrupts its functionality.
Symptoms of a bad micro switch include:
This OEM LG part is also compatible with Sears/Kenmore models.
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more
Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.
Needed installation parts. I ordered the parts from the company I purchased the appliances from. A week went by and no parts, called, emailed and called again to find out when the parts would arrive to be able to Re-schedule the installation. After the run around, I found AppliancePartsPros website and placed my order with them. I received the parts I needed within the time they promised. I was able to schedule my installation to enjoy my new appliance. It's been almost 4 weeks and still no... Read more
Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.
My son told me that almost all the microwave ovens that came into the repair center he worked at, 15 years ago, had a defective magnetron. I ordered a magnetron, and sat back until one shipped. The one that came, the first time, was in a small factory cardboard box, which was in a large bubble-pak Fedex envelope; which didn't show any signs of abuse. Inside, however, the factory box was beat up. Removing the magnetron, I noticed that the socket, as well as its' pins, was bent, and loose in the... Read more
The Time Delay Fuse is an OEM part for LG microwaves. This fuse provides a safety mechanism by delaying the flow of electricity, protecting the microwave's electrical components from power surges and ensuring the appliance operates safely. It helps to prevent immediate damage in the event of a power surge or electrical fault, thus prolonging the lifespan of the microwave.
Over time, the time delay fuse can become damaged due to electrical surges, wear and tear, or faulty connections. If the fuse blows, it can disrupt the microwave’s ability to function correctly.
Symptoms of a bad time delay fuse include:
Called AppliancePartsPros because of good experiencing diagnosing problem with a dishwasher repair. We definitely are modest income amateurs! Same excellent response to our questions. Three possible causes. Used easy search menu to fine replacement parts. Bought all three, knowing that if all not needed, the others could be returned (within 365 days) for refund. Replaced the capacitor successfully after calling to get more help with a couple of places where we got stuck. Oven now works... Read more
Replace your microwave's interior or underside light bulb when dim or burned out. Restores visibility for monitoring food. Confirm fit with your model.
This is a micro switch that detects whether the microwave door is properly closed and latched. It is part of the safety interlock system that prevents the microwave from operating with the door open. Replace this switch if the microwave does not start when the door is shut, runs with the door open, blows a fuse when the door closes, or stops mid-cycle intermittently.
Microwave turntable not rotating or making popping noises? This coupler connects the motor to the glass tray. Simple DIY fix takes under 15 minutes.
Replaced turntable motor and coupler Read more
Fix loud noise, humming, or overheating in your microwave. This cooling fan motor restores proper airflow. Moderate difficulty repair with basic tools.
Looked online and found that someone had experienced the same issue and had replaced the cooling fan assembly for the magnetron. I ordered the parts for the assembly (motor, fan, and support), and replaced them and this fixed the problem. It took about 10 minutes to replace the parts, but lowering the unit and disassembly took around 45 minutes. The most difficult part was getting the outer sheet metal cover back on after the repair, as it has a bunch of clips on each front edge that need to... Read more
Microwave won't turn on or has no power? A failed thermostat often causes complete power loss. Moderate DIY repair requires disassembly to access.
I checked for the reasons there was no power to the microwave. Then I talked with the technician at AppliancePartsPros who stated that it was most likely a blown or defective fuse. My LG microwave has two thermal fuses, a fuse assembly with two prongs and a short (1 inch) barrel type fuse. I replaced all of them after viewing YouTube videos and then reviewing the diagram for my microwave on the AppliancePartsPrps website. That was very helpful in locating where the fuses were installed. It... Read more
Glass turntable tray for microwaves. Supports dishes and rotates for even heating. Replace if cracked, broken, or missing to restore proper rotation.
The tray was dropped while being cleaned and broke. This replacement tray was a perfect fit. Read more
This thermostat is a temperature-sensitive safety switch used in LG microwaves. It monitors internal temperature and opens the circuit when overheating is detected to help protect components from heat damage.
Microwave won't heat? A failing high-voltage capacitor disrupts the heating circuit. This part stores electrical energy for consistent operation.
This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:
Replacement mounting screw for microwave installation and assembly. Use when original screws are lost, stripped, or damaged during service or relocation.
Plastic film covers holes in the microwave inner door frame. Replace if bubbled, burned, cracked, or peeling. Attaches to door glass assembly.
Careful placement of new screws into the inside of the outer door that now hold the frame assembly to the door secured the frame assembly to the outer door. All of the other parts I bought and replaced were a waste of money. I figured since I had them I might as well install them anyways. Easier than sending them back since I had the whole thing apart anyways. The part I really needed was no longer available, the outside door. The glass reinstalled into the retainers in the door without a... Read more
Usually ships within 4 - 14 days
Truss head tapping screw secures panels, brackets, and covers in appliances. Replaces missing or damaged fasteners to restore snug fit and alignment.
Removed old broken door handle per video link on AppliancePartsPro.com. Installed new handle with no issues. <10 minute job at best. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.