Maytag Range 629.46775 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04000059
This is a replacement broil element for the oven's upper heating function. It restores high-heat broiling and top-surface browning so you can sear, brown, and finish foods as intended. What it does:
- Produces the direct, high heat required for broiling and browning
- Replaces a burned-out, visibly damaged, or non-heating upper element
- Restores even top-heat for recipes that require searing or finishing
- Helps eliminate weak or no heat from the oven's broil function
What's included:
Install notes:
- Disconnect power to the appliance before starting any repair
- Allow the oven to cool completely and use basic hand tools to remove mounting screws and the old element
- Handle the new element carefully to avoid bending or damaging terminals
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Heating and broiler elements not working Rosemary W. • Brooksville , FL • November 22, 2016
Thanks to you, I was able to purchase replacements and they have been installed and everything works perfectly. Because of you I was able to forgo the price of a brand new range. Thanks for the savings.
Read more
More
$100.95
- Compare At:
-
$121.14
- You Save:
-
$20.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7101P309-60
This genuine replacement screw secures appliance components so panels, brackets, and assemblies stay tight and properly aligned. Replacing stripped, rusted, or missing hardware restores a solid fit and helps prevent rattles, shifting, or looseness over time.
- Fastens panels, brackets, and internal parts to maintain proper alignment
- Helps resolve issues caused by missing or damaged screws
- Restores secure mounting after service where original hardware is lost
- Use when threads are stripped or the screw head is damaged and won't tighten
What's included: One replacement screw. Install notes:
- Disconnect power; turn off gas supply if applicable before servicing
- Match screw location and length to your model's parts diagram for correct placement
- Start threads by hand to avoid cross-threading; use the correct driver bit
- Snug firmly but do not overtighten to prevent damage to mounting points
Do-It-Yourself Stories from Customers like You
Oven broil/bake switch had gone bad. Clint S. • Bowling Green , KY • November 07, 2020
Replaced switch and retaining screws
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7101P072-60
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11772394
Do-It-Yourself Stories from Customers like You
Igniter switch shorted out Jeff J. • Hoffman Estates , IL • October 11, 2016
Replaced switch assembly
Read more
More
$7.60
- Compare At:
-
$8.44
- You Save:
-
$0.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP854334
This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:
- Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
- Helps prevent moisture buildup and improves energy efficiency when sealing is restored
- Reduces rattling and vibration caused by a compressed or torn seal edge
- Commonly replaced when the strip is torn, missing, or no longer adheres properly
What's included:
Install notes:
- Disconnect power to the appliance before servicing to avoid electrical or burn hazards
- Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
- Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions
More
$8.60
- Compare At:
-
$10.23
- You Save:
-
$1.63
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10131078
A 10-24 lock nut used to secure threaded fasteners and prevent loosening from vibration. Simple, durable replacement that restores proper fastening where the original nut has worn or failed. What it does:
- Secures shafts, studs, or bolts with 10-24 threads and resists loosening under normal appliance vibration.
- Restores proper tension where a stripped or loose nut causes rattling or parts shifting.
- Helps maintain alignment of panels, brackets, or components that rely on a locked fastener.
- Small hardware solution for common fastening failures—no special part modifications required.
What's included: One 10-24 lock nut. Install notes:
- Disconnect appliance power and water before beginning repairs.
- Use the correct 10-24 threaded fastener and a properly sized wrench or socket to avoid rounding the nut.
- Tighten to a snug fit—do not overtighten or force onto damaged threads.
- Inspect mating threads and replace the bolt/stud if threads are stripped or damaged.
More
$2.64
- Compare At:
-
$3.17
- You Save:
-
$0.53
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 4006W112-45
$37.95
- Compare At:
-
$44.42
- You Save:
-
$6.47
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7801P173-60
Color: chrome. Measures about 23 inches wide by 16 inches deep.
Do-It-Yourself Stories from Customers like You
I forgot to take the racks out of my oven when I put it on 'clean'. When it was done, I noticed how terrible and rotted the racks were. It was very hard to pull them out of the oven . Gloria A. • Griffin , GA • January 06, 2019
Replacement was the only answer.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001527
Do-It-Yourself Stories from Customers like You
Drawer roller broke off Raymond Y. • Delatona , FL • January 16, 2015
Ordered a new roller and secured it in place
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12400043
Do-It-Yourself Stories from Customers like You
Oven door hinge spring was broken John S. • Miller Place , NY • January 10, 2016
The repair itself was straight forward as others have said.
Remove back panel, raise stove top to access srews, then remove side panels ( outer and inner ). Voila the hinges are right there. Then reverse
Complete job with cleaning took 1 1/2 hours
Very satisfied with parts (exact match).
Thank you Appliance parts pros.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 2416F059-71
Genuine Whirlpool part
By: Whirlpool
Part Number: 3804F245-51
Genuine Whirlpool part
By: Whirlpool
Part Number: 4005F747-51
Genuine Whirlpool part
By: Whirlpool
Part Number: 74002312
Front broiler drawer support.
Do-It-Yourself Stories from Customers like You
Drawer support broke drawer sagged and had to be lifted to open/close. Mark L. • Gloucester , MA • September 04, 2017
Bought and installed replacement part.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 74003125
Genuine Whirlpool part
By: Whirlpool
Part Number: 74003320
Do-It-Yourself Stories from Customers like You
Burner on my jen air pro range rusted out Frank M. • Providence , RI • November 15, 2014
After many years of excellent service the burner I use most often on the top of my JenAir range rusted through. After trying to remove the burner, which was firmly rusted into place, I decided to replace the cooktop pan, both burners and igniters. It was an easy repair to swap out the new parts for the old, and the only tool necessary was a #2 phillips screw driver. The only difficulty was that although the cooktop pan appears symmetrical, the screw hole pattern on each side is different. I did...
Read more
More