Poulan Chainsaw Cap, Lid & Cover

This part is a replacement blade cap assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken, lost or defective blade cap assembly in lawn tractors.The blade cap assembly enables the user to easily change the tractor's blades. It is housed in the middle of the blades for quick access. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this blade cap assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This blade cap assembly can be used with lawn tractor models that have been manufactured by Husqvarna and Poulan. Sold individually.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

This replacement part is an oil cap and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is usually found in appliances or machines that require oil to run. This cap allows the oil tank to be sealed so that debris and dirt do not get inside the tank. The cap also asks as a safety precaution so that oil does not escape from the tank. A new oil cap might be needed if the current one is damaged or broken. If the oil cap is not able to stay in place, it should be replaced immediately. It can be dangerous to operate any type of machine without the oil being secure inside the tank so be sure to replace this part as soon as possible. This oil cap is sold individually. This is also a genuine OEM replacement part sourced directly from the manufacture.

This quality air filter cover protects and secures the air filter to the chainsaw. If the air filter cover is not in place, the air filter could become excessively dirty or damaged. Through use or impact, the air filter cover can become damaged and may need to be replaced. A quick visual inspection will tell whether there are holes or cracks in the cover that necessitate a replacement.This air filter cover replacement requires no tools. The air filter cover comes with small tabs that can be used to secure it in place over the air filter. Tug on the original air filter cover and pull it out of its place before pressing the new one into place using its plastic tabs. Reassemble any other components before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The air filter cover is designed to be used with chainsaws manufactured by Poulan, Poulan Pro, and Craftsman.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This replacement part includes one fuel cap assembly and is compatible with specific models of gas-powered blowers and trimmers. This part is made of high-quality plastic. It consists of a black cap that is approximately 2 inches in diameter with a retainer connection to keep the cap from falling on the ground. The cap is meant to cover the fuel tank's fill nozzle. Replacing a lost, leaky, or damaged cap won't require any tools. This original OEM part is designed to deliver a perfect fit for compatible equipment. It is compatible with outdoor power equipment from Craftsman, Husqvarna, Poulan, and Weed Eater. This replacement part is sold individually.

This replacement part is a gear cap. This is a genuine replacement part made by Husqvarna. This part is small but used to keep different gears within the lawnmower safe and secure during use. This part is made of durable plastic and meant to be a strong protector for many gears. A new gear cap might be needed if the current one is missing or damaged in any way. This can include being dented, bent, cracked, or chipped. If the gear cap is not able to stay in place, it might be time to replace it. Be sure to wear work gloves during this repair. It is also recommended that the user refers to the appropriate user manual before replacing this part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

This air filter cover is a genuine Husqvarna part, sold individually. This air filter cover can be used as a replacement part for chainsaws. The purpose of an air filter cover is to prevent damage to the air filter; the air filter blocks the motor from taking in harmful external materials such as dirt, debris, and pebbles. Air filter covers are often replaced within the lifespan of a chainsaw as they can be subject to general wear and tear over time. If there are visible punctures, rips, or signs of erosion to the material, the air filter cover should be removed immediately and replaced with this genuine OEM replacement part. A broken air filter cover could cause further damage to the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air filter cover is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

A clutch cover assembly is bolted to the engine and has the clutch disc between it and the pressure plate. The springs within the clutch cover will force the pressure plate against the disc, moving it against the flywheel to send power into the manual transmission. This is a clutch cover assembly for Husqvarna and Craftsman chainsaws, including gear with the Poulan named attached. This is the cover for the assembly and ships as an individual part. It does not contain any of the other components associated with the transfer of power to the transmission.

This chainsaw fuel cap assembly is made from high-quality plastic. Durable threads keep this chainsaw fuel cap assembly working for years of use. You place one end in the fuel tank while the screw cap covers the nozzle. This keeps your gas from spilling out and causing possible damage or injury. You can’t cut down a tree or slice up some firewood with gas leaking everywhere. This also leads to harming the environment around you. Chainsaws fuel caps can swell. The rubber seals may leak after a certain amount of use. The cord attaching the cap to the insert may break, allowing the cap to be lost. Replacing the chainsaw fuel cap assembly can correct these problems. Pliers or a wrench may be needed to remove the old fuel cap assembly. This genuine OEM chainsaw fuel cap assembly was manufactured for use with Craftsman chainsaws. It is also compatible with Poulan and Poulan Pro chainsaws.

This is a tank cap assembly that is used on many models of chainsaws. It is located on the fuel tank and is designed to ensure all fuel stays within the container. A retainer is included with the tank cap assembly to prevent dropping the cap and allowing dirt and debris into the fuel tank. An O-ring is used to seal the cap in the proper position. Tank caps can be damaged or lost, which can lead to dirty fuel, so the part will need to be replaced.Before replacing the tank cap assembly, make sure the chainsaw is off and the engine is cool. Place the chainsaw on its side and unthread the original tank cap assembly if it is still present. Pull the retainer from the fuel cap. Replacing the cap requires no special tools, but a pair of work gloves can be helpful. Take the new tank cap assembly and place the retainer into the tank. Thread the new cap on and tighten it before use.This part is made to be compatible with Poulan and Craftsman chainsaws. This tank cap assembly is an authentic OEM part that is priced as an individual part. It is directly obtained from the manufacturer.

This is a chainsaw clutch cover assembly that is sourced from the manufacturer. Made specifically for chainsaws, this will cover the sprocket and the clutch, which helps to provide them some protection and increase their lifespan. Without a cover, debris could affect the clutch and sprocket, and they could become damaged. This cover assembly also includes a chain tensioner. One of the biggest issues with clutch cover assemblies is wear and damage to the chain tensioner. When the tensioner is not working properly, it will not be possible to provide the correct tension. Additionally, the housing itself could become damaged and crack. Regardless of what type of damage or problem owners have with the clutch cover assembly, they should make it a point to replace the item as soon as possible. This will help to ensure their chainsaw continues to work well. The chainsaw clutch cover is a genuine OEM part. It is sold individually and includes the tensioner. It does not include any hardware. The cover assembly will work with chainsaw models from Poulan, Poulan Pro, and Husqvarna.