Chainsaw Cap, Lid & Cover

Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.

This part is a replacement blade cap assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken, lost or defective blade cap assembly in lawn tractors.The blade cap assembly enables the user to easily change the tractor's blades. It is housed in the middle of the blades for quick access. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this blade cap assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This blade cap assembly can be used with lawn tractor models that have been manufactured by Husqvarna and Poulan. Sold individually.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

This replacement part is an oil cap and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is usually found in appliances or machines that require oil to run. This cap allows the oil tank to be sealed so that debris and dirt do not get inside the tank. The cap also asks as a safety precaution so that oil does not escape from the tank. A new oil cap might be needed if the current one is damaged or broken. If the oil cap is not able to stay in place, it should be replaced immediately. It can be dangerous to operate any type of machine without the oil being secure inside the tank so be sure to replace this part as soon as possible. This oil cap is sold individually. This is also a genuine OEM replacement part sourced directly from the manufacture.

This item is a replacement oil cap for a chainsaw. It has a bulb shape and features an oil can so that users can easily distinguish from other tanks. The oil cap helps to cover the oil tank, preventing dirt or debris from getting inside. Having dirt in the oil can gum up the works and cause structural engine damage. Oil is meant to lubricate so introducing grit into the lubricant would cause unwanted friction. Oil caps are generally made of plastic, and over time, the threading can wear out. If the oil cap is not staying connected to your chainsaw, this is a sign to should replace it. It’s an easy fix; just screw the replacement cap back onto the tank in place of the old cap. This part comes straight from the manufacturer and is a genuine OEM part suitable for use on any Craftsman or MTD chainsaw. This item ships individually and does not require any additional tools to be installed. Installation should take no longer than just a few seconds.

This quality air filter cover protects and secures the air filter to the chainsaw. If the air filter cover is not in place, the air filter could become excessively dirty or damaged. Through use or impact, the air filter cover can become damaged and may need to be replaced. A quick visual inspection will tell whether there are holes or cracks in the cover that necessitate a replacement.This air filter cover replacement requires no tools. The air filter cover comes with small tabs that can be used to secure it in place over the air filter. Tug on the original air filter cover and pull it out of its place before pressing the new one into place using its plastic tabs. Reassemble any other components before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The air filter cover is designed to be used with chainsaws manufactured by Poulan, Poulan Pro, and Craftsman.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This part is a shield that is used on lawnmowers and lawn tractors. It is manufactured out of a high-quality and durable metal. The purpose of the shield is to protect the engine from any flying debris. This component is held in place by two bolts.A new shield may be needed if the current one is cracked, broken, bent, or damaged in any way. If the shield experiences an impact collision with a hard object, it could become damaged. A socket set may be needed during the replacement of the shield. Make sure the outdoor power equipment machine is cooled off prior to attempting to work on it. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This shield is a genuine Husqvarna part. It is sold individually. This particular shield is compatible with lawnmowers and lawn tractors that are manufactured by Husqvarna.

This is a standard fuel cap for a hedge trimmer, chainsaw, or weed eater. The fuel cap assembly goes into the tank then screws onto the top of the fuel tank. A fuel cap keeps dirt and debris from falling into the fuel tank and gunking up the engine, causing it to misfire or corrode. Fuel cap assemblies are made of plastic, so they can dry out and snap. If the rubber seal on the fuel cap assembly is no longer preventing fuel from leaking, it’s time to replace it. Installing a new fuel cap assembly is simple. Just push the stopper in and screw on the lid. This is a genuine OEM product shipped from Husqvarna, the manufacturer of this part. This part is also compatible with Craftsman and Poulan products. Part sold individually.