Poulan Lawn Mower Fastener

This spacer is a genuine Husqvarna part, sold individually. This spacer can be used as a replacement part in a lawn mower. The purpose of the spacer in a lawn mower is to function within a fastening component, such as a washer, screw, bolt, or nut, in order to reduce friction between components as well as to allow room within the infrastructure of the appliance for components to shift and move around without detaching.The spacer in a lawn mower might need to be replaced if the small component is lost, misplaced, or damaged over time. Additionally, the spacer can fall out and be lost over the typical use of the lawn mower. If this occurs, the spacer should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor brands: Husqvarna, Craftsman, McCulloch, Poulan, Flymo, and Weed Eater.

Attaching to the front lift link, this washer is a component for use with lawn tractors. A washer is a component that is used with a screw fastener. Its purpose is to keep the screw from loosening by distributing the load over a larger area. A new washer may be needed if the user has mistakenly misplaced the original. When dealing with small parts, it's a good idea to place them in a container so that they are not lost. The washer could physically break over time due to normal wear and tear. If this is the case, it will need to be replaced so that the screws do not loosen. The repair person may choose to wear gloves to protect his or her hands during the replacement process.This washer is sold individually. It is an OEM part that is sourced directly from the manufacturer. It's compatible with lawn tractors that are manufactured by the Husqvarna, Poulan, and Craftsman brands.

This replacement part is a flange nut. It is a fastening component used in conjunction with a screw or bolt to secure parts within equipment.A new flange nut might be needed if the current one has been stripped by overtightening. Small parts like this one may experience enough friction to be worn down with extended use. Be sure to wear work gloves when replacing small parts and working near the engine. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is designed for use with outdoor power equipment like lawnmowers and snowblowers. This bolt is a hex thread rolling bolt with the nut included. This type of bolt is designed to go into pre-drilled holes, such as on an engine. The hex threads on the bolt push the material through the hole, and the nut is then applied to secure the bolt. Bolts should be inspected as part of routine maintenance to ensure the nut is tightly secured and that the bolt has not rusted or come out. If a rusted bolt is discovered or a bolt is missing from the equipment, this replacement bolt can be used. Before replacing or installing a part on the equipment, allow it to cool and then remove the spark plug from the unit. Gloves should be worn when working with the unit. Install the new bolt and tighten the included nut. This bolt is a hex threaded, 3/8-16 x 1-1/8 bolt made of durable black metal and includes the nut. It is compatible with lawnmowers, snow blowers, trimmers, and lawn tractors manufactured by Husqvarna, Poulan, Weed Eater, Murray, and Craftsman.

This flange nut can be used as a replacement part for snowblowers, lawnmowers, and tillers. Flange nuts fasten materials to one another in conjunction with a bolt. A flange nut is different from a regular nut in that it features a protruded flange on its end that functionally serves as a washer, negating the need for a separate washer part. A flange nut might have to be replaced for several reasons, including the part going missing, which is a frequent occurrence as it is small and does not necessarily cause any immediate damage if it is lost. Additionally, a flange nut can be subject to damage over time through general wear and tear, overuse, punctures, piercings, scrapes, or erosion to the metal material. Such damage can hamper its ability to fasten materials together. If this is the case, a replacement flange nut should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This flange nut is a genuine OEM Husqvarna part, sold individually. It compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This part is a replacement retainer ring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or misplaced retainer ring on lawn tractors. Retainer rings help to hold components together properly. This ensures that there isn't unnecessary movement, breakage, or friction. This part can become worn or corroded over time and thus will need to be replaced. Wear work gloves to protect the hands when installing this retainer ring. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this retainer ring, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This retainer ring can be used with a variety of different lawn tractor models manufactured by Husqvarna and Poulan.

This 1/4-20 hex nut has a great variety of uses on lawn and landscaping equipment. As a lock nut, it can be tightened and retains its grip, even without the use of a washer. This particular piece of hardware appears in many connective points on push mowers, zero-turn mowers, riding mowers, tillers, lawn tractor implements, and other types of equipment manufactured by Husqvarna, Poulan, Jonsered, and Weed Eater. For instance, with MTD mulching mowers, these hex nuts are used to secure the mower housing to the manifold of the mower. More than just with gasoline-powered lawn tools, these versatile nuts are also found on handheld tools like impact wrenches and tools driven by compressed air. Hex nuts bind tightly with their locking grip and seldom come off. The more likely scenario, especially since so many are used in manufacturing and by power tools, is that these nuts will become lost in the course of maintaining, cleaning, and repairing mowers and other equipment. For this reason, it's always important for the user to purchase more than the anticipated number needed. Make sure also to purchase hex nuts like these that are OEM certified and guaranteed.

This replacement part is a screw. This part is small but very useful in many kinds of machinery. This part connects components and ensures that they are secure.Screws may become stripped with overtightening, or corroded from exposure to the elements.This is a genuine replacement part made by Husqvarna. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.