Poulan Lawn Mower Parts

This v-belt is a genuine Husqvarna part, sold individually. This v-belt can be used as a replacement part for outdoor appliances with small engines such as lawnmowers and lawn tractors. This v-belt facilitates rotation so that the small engine can be powered on. The v-belt might have to be replaced at some point within the standard lifespan of the appliance if it can no longer serve its function. This could be as a result of general wear and tear or due to a direct impact with a hard object that could permanently warp the component beyond functionality. If this occurs and the damage is visible in the form of rips, punctures, or erosion, the v-belt should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This rear lawn mower wheel is a replacement part for walk-behind mowers that have had damage to one of the back wheels. The wheels on the lawn mower are durable because of the amount of work they have to do. However, they can start to wear down over time. Rolling over obstacles like rocks and other large debris may also cause damage to the lawnmower's wheels. If there is damage, the wheels should be replaced immediately.The plastic and rubber wheels are used for many models of mowers from Craftsman and Poulan. This is a genuine OEM replacement part and is sold individually. Those who need to replace both of the back wheels will need to buy two.

This is a rubber wheel ring that attaches to the wheel hub. Rubber wheel rings are also often called friction rings. The rubber wheel ring/friction ring meshes with the friction disc. This is what causes the drive wheel axle to turn. This is an integral part of the wheel movement.A new rubber wheel ring may be needed if the existing part is visibly damaged. The operator may also notice a grinding noise when the rubber wheel ring is starting to go bad. This may need to be replaced over time after normal wear and tear. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This rubber wheel ring is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This rubber wheel ring is compatible with snowblowers manufactured by Husqvarna, Poulan, and Jonsered.

This replacement part is a compression spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Compression springs are very important in many different types of appliances. Springs use forces to allow the engine and other parts to operate smoothly during use.A new compression spring might be needed if the current one is missing or damaged in any way. This can include being bent or cracked. Due to the nature of their use, compression springs can become stripped over time and should be replaced when this happens. It is not unusual for springs to snap under pressure from overuse. It is recommended to refer to the user's manual before replacing this part. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. This compression spring is sold individually and is sourced directly from the manufacturer.

Attaching to the front lift link, this washer is a component for use with lawn tractors. A washer is a component that is used with a screw fastener. Its purpose is to keep the screw from loosening by distributing the load over a larger area. A new washer may be needed if the user has mistakenly misplaced the original. When dealing with small parts, it's a good idea to place them in a container so that they are not lost. The washer could physically break over time due to normal wear and tear. If this is the case, it will need to be replaced so that the screws do not loosen. The repair person may choose to wear gloves to protect his or her hands during the replacement process.This washer is sold individually. It is an OEM part that is sourced directly from the manufacturer. It's compatible with lawn tractors that are manufactured by the Husqvarna, Poulan, and Craftsman brands.

This replacement part is a flange nut. It is a fastening component used in conjunction with a screw or bolt to secure parts within equipment.A new flange nut might be needed if the current one has been stripped by overtightening. Small parts like this one may experience enough friction to be worn down with extended use. Be sure to wear work gloves when replacing small parts and working near the engine. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This blade is a genuine Husqvarna part that fits various Husqvarna models. This blade can be used as a replacement part for lawn edgers, which are used to edge the areas of a lawn that are surrounded by or touching pavement.If the blade has made contact with the sidewalk, driveway, patio, garden, or other surface by which the lawn edger is passing, there is a chance that the blade will need to be replaced. Look for damage on the surfaces with which the lawn edger blades have made contact. Additionally, use the lawn edger and check if it its trimming and edging ability has declined or if there is a strange sensation in the feel and experience of trimming, such as a vibration coming from the equipment. If this is the case, the blade might have to be individually replaced. The appliance should not be used again until this replacement has occurred. Remember to always wear gloves when handling, repairing, and operating outdoor equipment such as lawn edgers.This blade is compatible with the brands Husqvarna, Weed Eater, and Poulan.

This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.

This bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is designed for use with outdoor power equipment like lawnmowers and snowblowers. This bolt is a hex thread rolling bolt with the nut included. This type of bolt is designed to go into pre-drilled holes, such as on an engine. The hex threads on the bolt push the material through the hole, and the nut is then applied to secure the bolt. Bolts should be inspected as part of routine maintenance to ensure the nut is tightly secured and that the bolt has not rusted or come out. If a rusted bolt is discovered or a bolt is missing from the equipment, this replacement bolt can be used. Before replacing or installing a part on the equipment, allow it to cool and then remove the spark plug from the unit. Gloves should be worn when working with the unit. Install the new bolt and tighten the included nut. This bolt is a hex threaded, 3/8-16 x 1-1/8 bolt made of durable black metal and includes the nut. It is compatible with lawnmowers, snow blowers, trimmers, and lawn tractors manufactured by Husqvarna, Poulan, Weed Eater, Murray, and Craftsman.

This flange nut can be used as a replacement part for snowblowers, lawnmowers, and tillers. Flange nuts fasten materials to one another in conjunction with a bolt. A flange nut is different from a regular nut in that it features a protruded flange on its end that functionally serves as a washer, negating the need for a separate washer part. A flange nut might have to be replaced for several reasons, including the part going missing, which is a frequent occurrence as it is small and does not necessarily cause any immediate damage if it is lost. Additionally, a flange nut can be subject to damage over time through general wear and tear, overuse, punctures, piercings, scrapes, or erosion to the metal material. Such damage can hamper its ability to fasten materials together. If this is the case, a replacement flange nut should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This flange nut is a genuine OEM Husqvarna part, sold individually. It compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.