Poulan Snow Removal Equipment Parts

This genuine OEM replacement washer is a specially hardened washer to provide more support for a wide range of different lawn appliances. Washers are usually used in conjunction with a nut and a bolt and act as a barrier between those two parts. Washers help to redistribute pressure to prevent the bolt from giving out over time, as well as to provide a stronger grip. Washers can begin to corrode over time, and when this happens, the washer can fuse together with the bolt or nut. This would make the connection difficult to disengage in the case of a bigger repair. It is good practice, then, to replace washers anytime the nut or bolt is also replaced. This way, all parts age at the same rate and will not have to be individually changed out. Use a wrench to unthread the nut and change out a washer. This part is a top of the line replacement washer for a Husqvarna, Weed Eater, Ryobi, Jonsered, or Poulan engine. It comes sourced from the original manufacturer and does not include any other hardware.

This pawl drive is a genuine Husqvarna part, sold individually. This pawl drive can be used as a replacement part in lawn mowers and chainsaws. This pawl drive is made out of durable metal. A pawl drive might have to be replaced within the standard lifespan of a lawn mower or a chainsaw. A pawl drive could suffer damage as a result of general long-term usage or from a direct collision with a falling object or a hard surface; this damage could come in the form of puncturing, erosion to the metal material, or warping the part beyond repair. If this is the case, the pawl drive should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This Pawl drive is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Weed Eater, and Ariens.

This is an authentic OEM replacement ignition module built specifically for Husqvarna lawn appliances. An ignition module, also known as an armature-magneto, is an essential part of a combustion engine's ignition. The ignition module creates pulses of high voltage electricity that the spark plug uses to generate a charge and start the ignition. Without a functional ignition module, the spark plugs and ignition will not engage. The most common reason for an ignition module to break is if the spark plugs have gone bad or are missing from the ignition. The charge generated by an ignition module is quite high, so if the spark plugs are not in place to receive the charge, the high voltage can fry and melt the module. If the spark plugs are not receiving a spark but can carry a charge, the odds are that the ignition module has been fried and will need to be replaced. To make this repair, use a wrench set and screwdriver. Although this high-quality replacement part is designed specifically for Husqvarna appliances, it may also work with some Jonsered appliances, too. It comes sourced from the original manufacturer and does not include any additional hardware.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This tire is a genuine Husqvarna part, sold individually. This tire can be used as a replacement part for a lawn mower or a lawn tractor.The tire for a lawn mower or a lawn tractor might eventually have to be replaced if it shows signs of damages that cannot be fixed by a basic repair. If the tire has been damaged, it should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This tire is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Weed Eater, and Craftsman.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of a hinge rod in a lawnmower is to affix to the discharge chute so that the chute has a range of motion while remaining attached to the appliance to fulfill its function.The hinge rod in a lawnmower might have to be replaced if it is damaged. The hinge rod could be punctured, scraped, dented, cracked, or eroded to the point that the hinge rod can no longer affix to the discharge chute or that the component is loosened to the point that a repair cannot fix it. If this occurs, the hinge rod should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Ariens, Murray, and Poulan.

This washer is a genuine Husqvarna part manufactured for use with lawnmowers. It is also compatible with lawn tractors, garden tractors, riding tractors, and other similar equipment. It is a hardened flat washer that is rather large compared to other washers. This washer is often used to attach the mower deck to the mower itself. Removing it is often part of a larger repair, and a screwdriver or socket wrench may be required to make this replacement. It is not unusual for washers and other hardware to experience wear and tear, especially if the mower gets heavy use. It may also need to be replaced if it becomes damaged while making other repairs.This washer is a genuine OEM part sourced directly from the manufacturer. It is sold individually, so be sure to check how many are needed and order accordingly. It is compatible with equipment manufactured by Ariens, Craftsman, Dixon, Husqvarna, Murray, and Craftsman.

This is a genuine replacement brake spring that is designed for use with select snowblower units. The brake spring is connected from the idler pulley to the frame assembly. This provides the tension for the brake on the snowblower, allowing the brake to function correctly. Over time, this spring can become worn and stretched and need replaced. There may also be impact damage or other situations where the spring could break. Regardless of the cause, a broken brake spring needs replaced immediately for safe operation of the machine. It is important to disconnect the power and wear gloves when performing repairs on snowblowers, and especially when working near the blades. Disconnect the old spring, hook the new spring through the proper holes, and then reconnect the power and start the machine to test the brake.This genuine OEM brake spring is manufactured to exact standards by Husqvarna. It can be used in select snowblowers and throwers from Husqvarna, Poulan, and Jonsered. This is sold as an individual piece and does not include any hardware or other parts. The brake spring repair will require a screwdriver, pliers, and adjustable wrench.

This replacement part is a bolt, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Bolts are found in different places inside many devices. This part is essential to the overall operation of many machines. This specific one is intended for lawn mowers and assists the overall device in working properly.A new bolt might be needed if the current one is damaged or missing. It is possible that the bolt can become stripped or damaged overtime, and should be replaced if this is the case. Be sure to reference the specific owner's manual for more information on how to replace or install this bolt. This is a single bolt. Be sure to purchase the correct amount as many machines require more than one to operate. This is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement part is a pulley. This is a genuine replacement part made by Husqvarna. Pulleys are very common in different types of machinery. This part allows for other pieces to be connected and work together so that the machine can operate effectively. A new pulley might be needed if the user notices unusual noises coming from inside the machine. This can be due to a malfunctioning pulley system or damage inside the appliance. Due to the friction that this pulley experiences, it is not unusual for this part to need replacing after years of normal use. Be sure the engine is completely powered down before attempting to replacing this part. Work gloves are also recommended when working near the engine. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

This part is a replacement foot rest pad. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn or defective foot rest pad in a variety of lawn tractor models. This particular pad is intended for the left side.The foot rest pad ensures the user has a comfortable, non-slip surface on which to rest their foot. This part is subject to wear and tear and will require replacement with a genuine OEM part if worn, detached, or no longer effective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to place this wheel, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this foot rest pad is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This footrest pad is a righthand footrest pad and is a genuine Husqvarna part. It is made as a replacement part for lawn tractors. The footrest pad is the part of the mower on which the right foot sits while the machine is being used. It is also sometimes used as a pedal.To replace the footrest pad, simply remove the old one and attach this replacement part. No further disassembly of the tractor is required, so it is a relatively simple repair. However, before replacing the footrest pad, be sure to take proper safety precautions such as disconnecting the spark plug, emptying the fuel tank, and allowing the engine to cool completely.This footrest pad is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. Please note that it is not compatible with the left side of the tractor. It is compatible with tractors made by Craftsman, Husqvarna, and Poulan. It replaces obsolete part # 165799X428.

This chassis sway bar bracket is a genuine Husqvarna part, sold individually. This chassis sway bar bracket can be used as a replacement part in a lawn mower. The purpose of the chassis sway bar bracket in a lawn mower is to support and bolster the placement of the sway bar of the chassis, so that the sway bar can prevent the lawn mower from tipping over when the appliance is being turned around a corner while in operation.The chassis sway bar bracket might be subject to damage within the course of the operation of the lawn mower; if the chassis sway bar bracket is punctured, torn, cracked, dented, eroded, warped, or otherwise damaged, the component should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, as safe use of the appliance cannot be guaranteed without this component firmly in place.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This chassis sway bar bracket is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Jonsered.