Poulan Snow Removal Equipment Parts

This replacement part is a clean-out tool. It is a genuine replacement part made by Husqvarna. This part works with different appliances and it meant to be used to clean different parts. This ensures that the overall appliance works properly.A new clean-out tool might be needed if the current one is damaged or missing. If the tool becomes too dirty and is unable to clean anymore it is recommended that it be replaced as soon as possible. Due to the nature of this tool, it is common that it can become worn down over time and need to be replaced. Be sure to wear work gloves during this repair. This clean-out tool is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

The snowblower is designed to remove snow from the surface over which it is run, but no snowblower is designed to totally eliminate all of the materials beneath it. Most leave a small skim coating that ensures the augers don't scrape along the ground and damage a walkway or drive. However, many are also equipped with a scraper bar that removes even more of the snow than the skid plates allow. If the scraper is damaged or bent, it will mean a less satisfactory performance by the blower. This is an OEM part that is very easy to install with little more than a properly sized screwdriver and a socket or wrench set. This replacement scraper bar is designed to fit many different snowblowers made by Husqvarna and Poulan, and works with more than 100 models. It ships individually with mounting hardware.

This part is a clean-out mounting clamp that is used on snowblowers. The purpose of the clean-out mounting clamp is to hold the clean-out tool. This component attaches to the auger housing and is manufactured out of a heavy-duty black metal material.A new clean-out mounting clamp may be needed if the original is cracked, broken, or damaged in any way. If the clean-out mounting clamp is missing from the snowblower, the operator may wish to replace this part out of convenience, although this part is not essential to the operation of the snowblower. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This clean-out mounting clamp is a genuine Husqvarna part. It is sold individually. This specific clean-out mounting clamp is compatible with snow blowers that are manufactured by the Husqvarna, Poulan, and Jonsered brands.

The snowblower belt is used to spin the auger, which is what causes the snow to be thrown when using the blower. The belt will start to wear down and become brittle over time. It can break, which means the machine will no longer be capable of throwing snow since it will not spin the auger. Additionally, owners might notice that there are squeals and other strange sounds that occur when using the blower, even though it might still be working. The belt could slip, particularly after it has become stretched after a lot of use. Owners should inspect the belts regularly. When these problems occur, the owner will want to replace the belt right away. This genuine OEM snowblower v-belt is sold individually and is for use specifically with snowblowers. Compatible brands include Jonsered, Husqvarna, Poulan, Poulan Pro, and Craftsman. The owners should always check their manuals to be sure they are choosing the correct belts to replace for their snowblowers.

This part is a bottom pan. The bottom pan is what covers the moving parts in an engine, including the transmission and gears. The bottom pan is what protects the engine, transmission, and gears from any debris that would impede the operation of the outdoor power equipment if it entered the engine area. This part is black and made from plastic.A new bottom pan may be needed if the current bottom pan is broken, cracked, or damaged in any way. The operator can visually inspect the bottom pan to determine whether the part needs to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This bottom pan is compatible with snowblowers manufactured by Husqvarna and Craftsman.

This spacer is a genuine Husqvarna part, sold individually. This spacer can be used as a replacement part in a lawn mower. The purpose of the spacer in a lawn mower is to function within a fastening component, such as a washer, screw, bolt, or nut, in order to reduce friction between components as well as to allow room within the infrastructure of the appliance for components to shift and move around without detaching.The spacer in a lawn mower might need to be replaced if the small component is lost, misplaced, or damaged over time. Additionally, the spacer can fall out and be lost over the typical use of the lawn mower. If this occurs, the spacer should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor brands: Husqvarna, Craftsman, McCulloch, Poulan, Flymo, and Weed Eater.

This is an auger shaft bearing that is used on many snowblowers created by Husqvarna. The auger shaft bearing connects to the auger plate. A bearing helps the shaft rotate easily inside of a snowblower. Through use or time, the auger shaft bearing can become damaged or break and will need to be replaced. If the bearing is damaghed, it can cause vibrating, wobbling, or binding and may prevent the shaft from rotating. Failed bearings also sometimes create a squealing sound coming from the snowblower.If any of these things are occurring with a snowblower, the auger bearing will need to be replaced. Place the blower on a flat, stable surface and disconnect the spark plug wire before beginning. The belt cover and auger belt will need to be removed along with the roller bracket. Remove the auger housing to get access to the auger shaft bearing to replace it. Reassemble the components before using the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual unit. The auger shaft bearing is made to be used with several snowblowers manufactured by Husqvarna.

This replacement part is a cable control. It is a genuine replacement part made by Husqvarna. This part is typically found in lawnmowers and allows the user to control the settings of the appliance by using the cable. This is attached to the engine and allows different settings and powers to be selected.A new control cable might be needed if the current one is damaged or missing. If the control cable is stripped from regular use over time, it is recommended that it be replaced. If the user is unable to control the appliance from the control cable, it can be due to a faulty cable. Be sure the engine is powered off completely before replacing it.This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This replacement part is a cable assembly. This is a genuine replacement part made by Husqvarna. Cable assemblies are found in many types of machinery and are important to the overall use of the appliance. A new cable assembly might be needed if the current one is missing or damaged in any way. This can be due to normal wear and tear over time. The wires in cable assemblies are often worn down due to the nature of wires in general. Be sure the engine is completely turned off and work gloves are worn during this repair. This part is sold individually and is sourced directly from the manufacturer. This cable assembly is a genuine OEM replacement part to ensure proper fit.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.

This belt is a genuine Husqvarna part. It is a traction drive v-belt that is manufactured as a replacement part for snow blowers and snow throwers. It is made from flexible rubber materials.On the snow blower, the traction drive v-belt works with the pulley assembly in order to transfer the power that the engine generates to run the mower. One common sign that the belt needs to be replaced is if the snow blower or thrower makes a loud screeching sound, particularly when first started.This traction drive v-belt is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with snow equipment made by Husqvarna, Jonsered, and Poulan. It replaces obsolete part number 437261.

This part is a replacement auger paddle. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or defective auger paddle in several varying models of snow blowers.The auger paddle rotates inside the snow blower housing and scoops snow up so it can be expelled in the desired direction. Because this part has regular contact with the ground, it can become worn down easily, thus requiring replacement. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this auger paddle, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This auger paddle can be used with snow blower models that have been manufactured by Husqvarna and Poulan. Sold individually.

This replacement flywheel assembly for use in chainsaws fits onto the crankshaft. It features magnets along the side that provide an electric charge when the magnets go past the ignition module. The electric charge that is created by the flywheel and ignition module passes to the spark plugs, which spark the air-fuel mix in the cylinder. The metal flywheel could become corroded, which can make parts of it brittle. Over time, the flywheel could also become worn down from natural use, and it might no longer function properly. This would mean that it would be difficult or even impossible to start the chainsaw. When this part fails, owners should replace it right away. The authentic OEM chainsaw flywheel assembly is sold individually. It is made to work with chainsaws, and it is compatible with several different brands including Husqvarna, Craftsman, Poulan, and Poulan Pro.

This is a rubber wheel ring that attaches to the wheel hub. Rubber wheel rings are also often called friction rings. The rubber wheel ring/friction ring meshes with the friction disc. This is what causes the drive wheel axle to turn. This is an integral part of the wheel movement.A new rubber wheel ring may be needed if the existing part is visibly damaged. The operator may also notice a grinding noise when the rubber wheel ring is starting to go bad. This may need to be replaced over time after normal wear and tear. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This rubber wheel ring is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This rubber wheel ring is compatible with snowblowers manufactured by Husqvarna, Poulan, and Jonsered.