Poulan String Trimmer Parts

This is a carburetor adapter. If this part is broken or deteriorated the carburetor may not function as efficiently, potentially causing the engine to misfire or reducing engine performance. In an internal combustion engine the carburetor is responsible for sending a combination of fuel and air to the motor for ignition. This carburetor adapter fits between the cylinder and carburetor to improve the functionality of the carburetor and, ultimately, the performance of the engine. This part is manufactured from high-quality and durable plastic. This carburetor adapter is a genuine OEM replacement part that has been sourced directly from the manufacturer. This carburetor adapter fits various different models of Husqvarna, WeedEater, and Poulan blowers, trimmers, and hedge trimmers. Please note this part is sold individually.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This is a throttle housing designed to go around the throttle cable, trigger, and wire to keep all of those components secure and protected. It's made of durable plastic but wear and tear or impact can damage or break the throttle housing.It's easy to determine with visual inspection if the throttle housing needs to be replaced. A pair of work gloves and an Allen wrench will be needed to complete the repair. The process involves taking out a set of four screws that hold the old throttle housing. Take it off of the equipment and install the new one using the same screws. Once the new housing is placed, the equipment can be used as normal.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The throttle housing is made for use with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Craftsman. This part is sold individually. This part is sold individually.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

This is a starter pulley that is used with various types of string trimmers from major manufacturers.The pulley keeps the starter rope in the right location so that the chainsaw comes on and offers cutting power. Through wear and tear or impact, the starter pulley can break or become damaged.If a user pulls the starter rope and the engine does not start, the starter pulley may not be working correctly. It will need to be replaced. Before the replacement is made, make sure the tool is turned off and the spark plug wire is disconnected. The starter pulley and rope can be reached by disassembling the trimmer. The recoil spring should be rewound before the rope is threaded back in.This starter pulley is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is made for use with string trimmers manufactured by Turf King, Craftsman, Paramount, Weed Eater, Poulan, and Poulan Pro.

This hub is a genuine Husqvarna replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The hub is a crucial piece of a lawn trimmer that turns the string with enough force to cut through plant material. The hub contains the string that is unspooled when the engine is running and a cap with piercings through which the string is unspooled. A lawn trimmer hub might have to be replaced if an incompatible string is used on the lawn trimmer, such as a heavier string that cannot be properly spooled and unspooled by the hub. Additionally, a hub might have to be replaced from general overuse or long-term use. To remove and replace the hub, one will need a Phillips screwdriver, a flathead screwdriver, and an adjustable wrench. If the hub is damaged to the point that the lawn trimmer is unusable, the hub should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This hub is compatible with the following brands: Husqvarna, Poulan, and Weed Eater. This part sold individually.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This part is a muffler that is used on riding lawn mowers and lawn tractors. The purpose of a muffler is to reduce the noise that comes from the engine's exhaust. This muffler is manufactured out of high-quality, durable metal. The hardware to secure the muffler is sold separately.A new muffler may be needed if the original wears out. The muffler can also get clogged and require a replacement in order to operate at its best. Make sure to allow the muffler and engine to cool completely prior to attempting to do any repairs or replacements. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This muffler is a genuine Husqvarna part. It is sold individually. This particular muffler is compatible with riding lawn mowers and lawn tractors that are manufactured by Husqvarna, Weed Eater, Poulan, and Jonsered.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. Springs are commonly found in many appliances and assist in connecting certain parts so that the appliance is able to run smoothly. A new spring might be needed if the current one is stripped down or is no longer functioning properly. This can be due to normal wear and tear after years of use. Due to the nature of certain springs, these parts can snap under pressure and should be replaced if this is the case. Work gloves are recommended when replacing this part as this spring is often found close to other dangerous parts. This specific spring is sold individually and is sourced directly from the manufacturer for long-lasting use. This part is a genuine OEM replacement part to ensure proper fit.

This throttle control assembly is a genuine MTD part sold individually. This throttle control assembly can be used as a replacement part in a lawnmower. The purpose of the throttle control assembly in a lawnmower is to allow the operator of the appliance to fully regulate and maintain the speed and pacing of the appliance to a customized setting that adheres to the needs and comfort of the operator.The throttle control assembly could be punctured, dented, ripped, torn, scraped, scratched, warped, or eroded, and if this damage precludes the function of the throttle control assembly, it should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This throttle control assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This part is a replacement foot rest pad. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn or defective foot rest pad in a variety of lawn tractor models. This particular pad is intended for the left side.The foot rest pad ensures the user has a comfortable, non-slip surface on which to rest their foot. This part is subject to wear and tear and will require replacement with a genuine OEM part if worn, detached, or no longer effective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to place this wheel, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this foot rest pad is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This footrest pad is a righthand footrest pad and is a genuine Husqvarna part. It is made as a replacement part for lawn tractors. The footrest pad is the part of the mower on which the right foot sits while the machine is being used. It is also sometimes used as a pedal.To replace the footrest pad, simply remove the old one and attach this replacement part. No further disassembly of the tractor is required, so it is a relatively simple repair. However, before replacing the footrest pad, be sure to take proper safety precautions such as disconnecting the spark plug, emptying the fuel tank, and allowing the engine to cool completely.This footrest pad is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. Please note that it is not compatible with the left side of the tractor. It is compatible with tractors made by Craftsman, Husqvarna, and Poulan. It replaces obsolete part # 165799X428.