Poulan String Trimmer Parts

This cylinder head is a genuine Husqvarna part, sold individually. This cylinder head can be used as a replacement part in a leaf blower. The purpose of the cylinder head in a leaf blower is to affix to the top of the cylinder block and close off the combustion chamber within the cylinder, so that airflow in and out of the cylinder block can be regulated and controlled to exact specifications for standard use of the leaf blower.The cylinder head in a leaf blower might have to be replaced if the cylinder head is dented, punctured, scraped, torn, cracked, chipped, or otherwise damaged to the point of exposing the internal combustion chamber to the elements or to possible leakages from the inside or outside of the component. If this occurs, the cylinder head should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This cylinder head is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

The piston ring provides a seal between the cylinder wall and the piston, attaching inside the groove around the piston directly. It is responsible for keeping the combustion gases in the cylinder and preventing them from entering the crankcase. The piston ring may break down with general use over time or it may break unexpectedly due to some kind of damage or other mechanical failures. This creates poor compression in the cylinder and can result in a loss of power to the equipment. Significant leaks could result in an engine that won’t run at all. The Husqvarna piston ring is a genuine OEM part from American Yard Products, who manufactures equipment and parts for leading industry brands, including Husqvarna, Craftsman, Poulan and Poulan Pro, Weed Eater, Sears/Roper, Rally, Electrolux Home Products, and Yard Pro. This piston ring fits several models of leaf blowers and trimmers from the brands listed. Refer to your user manual parts diagram for exact part compatibility.

Leaf blowers are noisy machines in general, but could be far louder if they were not fitted with mufflers. This is the part that catches the sound emitted by the engine and keeps pressure in the engine at a balanced level. When a blower seems to running at a level of noise that is far above normal or if it doesn't seem to run as powerfully as it should, it might be that the muffler needs to be replaced. This replacement blower muffler is designed for use on blowers made by Husqvarna, Poulan and Weed Eater. It will suppress the amount of noise exiting from the engine. This is an OEM replacement part that is made of metal and ships individually. Replacing it is not a very complex task, but will vary from model to model. It can often be managed with only a screwdriver.

This is a chain bracket ensures the chain on the equipment remains attached and stable when the lawn tool is being used. This chain bracket is made of durable materials but over time, it can wear out or experience damage. If there is substantial damage or the chain bracket has broken, it will need to be replaced.If a replacement is needed, work gloves and a wrench set will be needed. Make sure the chainsaw is powered off and the spark plug wire has been removed from the equipment. The clutch itself will first need to be removed to get access to the chain bracket. Remove the old chain bracket using a wrench and take the new bracket and place it in the same location. The chain will interlock with it. Make sure it is tightened properly before putting the spark plug wire back on.This is a genuine OEM replacement chain bracket that is directly sourced from the manufacturer. It is sold as an individual component. The chain bracket is designed to be used with chainsaws and string trimmers manufactured by Poulan, Poulan Pro, and Craftsman.

The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

The clutch drum assembly seen here from Husqvarna is an important part of machines such as trimmers and pruners. The purpose of the clutch drum is to engage the clutch to spin the flex shaft and the cutting head. The clutch drum assembly could need to be replaced for many reasons. One of the most common signs is when the trimmer head stops spinning when it encounters weeds, grass, etc. Other signs include having a drive shaft that will not engage or a clutch that won't engage the drum. Sometimes, the lining in the clutch drum could become stripped, so there will be no torque when it is used. Replacing the clutch drum assembly can be a complicated task and will require a range of tools. Owners will also need to empty the fuel from the machine before they replace the clutch drum. This authentic clutch drum assembly is an OEM part from Husqvarna. It is sold individually and works for certain models of string trimmer and pole pruner. Brands that are compatible in addition to models from Husqvarna include Craftsman, Weed Eater, Poulan, and Poulan Pro.

This replacement oil tank for a pole pruner or chainsaw is an authentic OEM replacement part. The inner workings of an engine consist of many moving parts. These parts are mostly made of metal and they thrash about against each other to produce and transfer energy. Engines use oil to lubricate these parts so that they do not rub and create friction as this would cause the engine to overheat. This oil tank lets operators quickly top up their engines with oil without having to take apart the inner mechanics. Oil tanks are made of durable reinforced plastic but it is still possible to bang, dent, or even puncture them. Should this happen, oil will leak from the tank and the engine will be starved of lubrication. For safety purposes, it is important to immediately replace a broken oil tank. To do so, use a wrench to remove the old tank and install the new part with the same bolts. This oil tank is compatible with Poulan and some Husqvarna appliances, and as a high-quality replacement part, it comes sourced from its original manufacturer. This part includes an oil tank and oil tank cap but it does not include an oil line.

This authentic OEM part is a replacement momentary switch meant for a chainsaw or edge trimmer. Also known as a kill switch, a momentary switch acts as a safety measure to immediately shut off the appliance's motor. If the user begins to lose control of the appliance, they can simply hit the momentary switch and the engine will disengage even if it is not currently in the off position. This helps to prevent accidents and bodily harm. When engaged, the engine requires a five second waiting period before it can restart. Over time and through repeated use, switches can naturally become worn out. They may also be damaged if knocked against something hard on accident. Replacing this switch will require a screwdriver to access the switch located in the handle of the appliance. Once accessed, the switch can easily be replaced by detaching the wires and inserting the new part. Be sure to follow the user's manual as this process will vary depending on the appliance. This part is sourced directly from its original manufacturer and will work with Poulan and Weed Eater appliances. This part ships individually.

This fuse is a genuine Husqvarna part, sold individually. This fuse can be used as a replacement part in a lawn mower. The purpose of the fuse is to protect the lawn mower from exceeding the maximum electrical current of which the appliance is capable of withstanding.The fuse of a lawn mower can be blown, and if the fuse cannot be repaired, the component should be removed and replaced by this genuine OEM replacement part. Signs of a blown lawn mower fuse can include a punctured, torn, frayed or smeared wire. It is a simple replacement process that will require only basic tools to properly execute. Make sure to reference the appropriate manuals when conducting this replacement. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuse is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Ryobi, and Jonsered.

This is a bellcrank ground drive intended for use with riding mowers, tractors, and trimmers. The bellcrank ground drive employs the idler pulleys when the pedal brake control shaft assembly is pressed. A new bellcrank may be needed if the original was faulty, or if it becomes significantly worn through general operation of the machinery. However, installation of a new bellcrank is relatively simple. Only a few tools will be required when replacing this item, including: a socket set, a set of pliers and a hex wrench. The removal of the mower deck will also be required. The user should refer to their owner's manual for guidance regarding their specific model.This is an OEM part sourced directly from the manufacturer. It is sold individually. The bellcrank ground drive is designed for use in Husqvarna, Poulan, Weed Eater, and Jonsered models.

This is a recoil starter pulley kit that can be used as a replacement for many different models of handheld trimmers and similar outdoor power equipment. The starter pulley is an important part of the starter mechanism in the engine. When the user pulls the rope to start the engine, the pulley will engage the flywheel, which will then allow the engine to start running. Owners might find that they need to replace the recoil starter pulley at some point. Over time and with a lot of use, this part can begin to wear down. Elements of it could break or wear away. If this happens, it will be difficult to get the engine started because the pulley will not properly engage the flywheels. Sometimes, it might be impossible to get the engine started at all. The owner will then need to replace the recoil starter pulley. This is a genuine OEM replacement part that is sold individually. The pulley can work with many models of pole pruner, string trimmer, and leaf blower. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro.

This fan baffle is a genuine Husqvarna part, sold individually. This fan baffle can be used as a replacement part in a string trimmer or a pole pruner. The fan baffle in a string trimmer or a pole pruner might have to be completely replaced if the fan baffle can no longer serve its typical function. This could occur if the fan baffle suffers damage for which a repair cannot be conducted. If this occurs, the fan baffle should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual or handbook. It is a simple replacement process that will only require simple tools to conduct. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fan baffle is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This is a momentary switch kit is special switch that is used to turn the handheld leaf blower off and on. It's made of durable plastic that houses a switch with two tabs on the sides. Through time and use, the momentary switch kit can start to malfunction due to damage or wear and tear. When this happens, the momentary switch kit will need to be replaced. A broken switch kit will not allow a user to turn on and off the leaf blower.Replacing the momentary switch kit doesn't require the use of tools. A set of work gloves can be useful for the process. Make sure the engine is shut off, and the spark plug wire has been disconnected. Take off any covers needed to access the momentary switch. Remove the switch from the wires and install the new part.This is an authentic replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The momentary switch kit is designed for use with leaf blowers manufactured by Craftsman, Weed Eater, Poulan, and Poulan Pro.

This starter cup assembly is a genuine Husqvarna part, sold individually. This starter cup assembly can be used as a replacement part in a string trimmer. The purpose of the starter cup assembly in a string trimmer is to rotate the flywheel with the purpose of powering on the small engine of the string trimmer; the starter cup assembly is a key component of the pull-start mechanism of a string trimmer.If the starter cup assembly suffers from puncturing, tearing, scraping, cracking, denting, eroding, or warping to the point of reduced efficacy, the starter cup assembly should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This starter cup assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This part is a replacement choke lever. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken choke lever in line trimmers.The choke lever enables the choke plate to open or close within the carburetor, which helps to power on the engine. The engine may not start if this part is faulty, so if damaged, it should be replaced. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular choke lever, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality plastic. This choke lever can be used with a variety of line trimmer models manufactured by Husqvarna, Poulan, and other brands.