Poulan String Trimmer Parts

This high-quality drive control cable is used on wheeled trimmers and lawnmowers. The control cable is the part that causes the blade to stop when the control handle is released. It connects the drive control lever to the transmission so the equipment will move or stop when going across the lawn. If the cable is broken or becomes damaged, the brake will not release even if the lever is pressed. If the lawn equipment no longer stops or doesn't move when it should, the drive control cable likely needs to be replaced. Remove the spark plug wire from the spark plug and then release the cables from the handle. Take off the drive cover and remove the drive control cable. Once it has been removed, the new replacement part can be installed before reassembling the other components.This drive control cable is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part and includes a rubber insulated cable. This component is made for use with lawnmowers and string trimmers created by Poulan, Craftsman, Weed Eater, and Husqvarna.

This replacement driver spring is a genuine OEM part for a string trimmer with a starter rope ignition. When an operator pulls the starter rope, the rope must recoil back into the starter assembly before it can be used again. This spring connects to a driver pulley in the starter assembly and maintains the right amount of tension needed to recoil the pulley. Over time, driver springs will begin to lose some of their tension. This is especially true if the operator is quite rough on their appliance. Pulling too hard on the starter rope can wear out the spring more quickly, making it less effective. Without a properly tensed driver spring, the starter rope will not recoil into the assembly. To change out the spring, use a nut driver to open the starter assembly and remove the pulley to get access to the old spring. Carefully remove it and install the new part. This replacement driver spring is a high-quality part designed to match the exact specifications for a Husqvarna or Jonsered appliance. This part is sourced from its original manufacturer and ships individually.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

A new rope kit may be necessary if the original rope becomes deteriorated or frays with regular equipment use.This rope is part of the recoil starter assembly, an essential component that enables the motor to be pull-started. Due to frequent usage and wear and tear, the rope can easily fray. Without this rope the engine cannot be manually pull-started. It is manufactured from durable nylon.This Husqvarna rope kit is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement Husqvarna rope kit fits various different models of Husqvarna, Poulan, and Craftsman blowers, trimmers, and hedge trimmers. Please note this is sold individually. Handle grip not included.

This is a quality air filter used with many types of gas powered string trimmers. The air filter plays an important part in the engine since it ensures the motor only has clean air available. The air filter is responsible for catching dirt, dust, and other debris and collecting it in one place before it can move into other components of the trimmer. The air filter needs to be inspected on a regular basis for damage or clogging. If either of these things occurs, the air filter needs to be replaced to ensure the engine gets clean air.No tools are needed to replace this string trimmer air filter. The bolt knob that secures the air filter cover will need to be removed first. Remove the original air filter and place the new one in the same location. Reassemble the parts and make sure to test the string trimmer before use.This air filter is compatible with various string trimmers manufactured by Poulan, Poulan Pro, and Craftsman. It is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer.

This starter assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is found on trimmers and other outdoor lawn and garden equipment that utilize pull starts. This starter assembly is a recoil system that uses a pull rope with a handgrip, a starter pulley, and a starter spring. The grip is used to pull the rope, which releases the tension spring from the pulley. This causes the crankshaft to spin so that the engine starts. These parts are all covered by a plastic shroud to protect them from damage. However, normal wear and tear can lead to failure of the system. It can be easier and quicker to replace the entire starter assembly than it is to take it apart and replace one piece. Before removing the starter assembly, remove the spark plug. This repair requires a screwdriver to remove the old starter and install the new starter assembly. Do not misplace the screws; these are not included with the assembly. After the new starter is installed, reinsert the spark plug and pull the starter to check the repair. This starter assembly is sold as one complete, pre-assembled unit. The housing is durable black plastic with a nylon rope starter, plastic grip, and metal starter spring. Screws are not included. This unit is compatible with grass trimmers manufactured by Poulan and Husqvarna.

This is a ready-to-install fuel tank assembly designed for use on trimmers. It is made of high-quality plastic. The assembly includes a translucent tank, a fuel filter inside the tank, an attached fuel tank cap, and a fuel line hose. If the trimmer is leaking gas, check the fuel tank, cap, fuel lines, grommets, fuel filter, and the primer bulb. Options include replacing individual parts depending on which components are damaged or installing a new fuel tank assembly. Remember that any gas-leak related incident requires immediate attention. This is an OEM replacement part sourced directly from the manufacturer. The assembly kit is compatible with specific trimmer models from Craftsman, Weed Eater, and Poulan. It is sold individually.

This genuine OEM replacement part is a rebuild kit of various gaskets used in a gas-powered leaf blower engine. This kit includes a crankshaft gasket, a carburetor gasket and carburetor adapter gasket, a cylinder base gasket, and a muffler shield. Gaskets act like a seal between different parts of an engine that keeps different liquids and gasses from passing into the wrong section of the engine. Gaskets can become worn out and crack or shrink over time through repeated use and exposure to exhaust and heat in the engine. A common sign of a fault gasket is if your engine is not running at full capacity or if it stalls out shortly after ignition. Changing out a gasket should not be a difficult job, but it will depend on which gasket you are replacing. Making this repair will require a screwdriver and set of pliers. This gasket rebuild kit is compatible with Poulan, Weed Eater, and Husqvarna gas powered leaf blowers. These gaskets are made of a mix of plastic and rubber. This kit ships individually and is sourced directly from its original manufacturer.