Parts for Husqvarna LDX: Pruner Attachment Parts

Replace a worn drive sprocket if your chainsaw chain won't rotate or moves sluggishly. Simple installation in 15-20 minutes with basic tools.

Retainer ring that secures the sprocket assembly on the drive shaft. Replace if cracked, worn, or missing to ensure proper sprocket alignment and fit.

Secures the guide bar to your chainsaw. Replace if stripped, corroded, or threads are damaged. Confirm fit with your model number before ordering.

Fixes loose or overly tight chains that slip or cause excessive friction. This bar adjustment kit restores proper chain tension. Easy DIY repair.

This adjustable pin bar is used on chainsaws and other lawn and garden equipment to ensure a blade is adjusted to the appropriate rate of tension. When the chainsaw blade is properly adjusted, it will cut faster and better. The pin bar is made out of a durable metal but can become damaged over time. If the pin bar is not working correctly or has broken, it will need to be replaced.If a chainsaw or pole pruner is no longer performing as well as it used to, the adjustable pin bar may need to be replaced. To replace this pin, the cover of the chainsaw will need to be removed. Take the gear that has the screw and pin bar on it out of the machine. Next, remove the broken adjustable pin bar and replace it with a new part. Reassemble the tool for it to be ready to use.This adjustable pin bar is designed for use on Craftsman, Poulan, Poulan Pro, and Husqvarna chainsaws, pole pruners, and string trimmers. It is a genuine OEM replacement component that is directly sourced from the manufacturer. The part is sold individually.

Loose or misaligned chainsaw bar? This bar adjustment retainer secures the adjustment screw mechanism. Simple metal clip replacement takes minutes.

The saw guide bar is what provides stability, efficiency, and guidance to the chain that cuts and the motor that drives the chain. This 8-inch replacement bar for pole pruners features solid and durable steel construction. It will make sure equipment cuts quickly and smoothly while delivering maximum efficiency. A worn guide bar would result in inaccurate and inefficient cutting and logging. A bar may worn-out if cutting takes longer than with a sharp chain. A replacement may also be needed when the bar shows narrow tails, when the inside rails are worn, and when the groove turns to a loose V shape. To extend the life of the bar, ensure that the chain stays oiled while in use and that the bar is flipped upside down each time the chain is sharpened. This genuine OEM replacement bar is meant for use on a pole pruner or pole saw produced by Poulan or Poulan Pro. It is sold individually.

Metal bolt that secures the bar to the chainsaw housing. Replace if corroded, stripped, damaged, or missing. Durable metal construction for reliable attachment.

Hex nut for chainsaw assembly. Secures components with screws and washers. Replace if stripped, corroded, or missing to restore proper fitment.

Replacement screw for line trimmers, edgers, chainsaws, and pruners. Replaces lost, damaged, or stripped screws in small engine assemblies. Sold individually.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This genuine Husqvarna replacement part is an oiler for use with pruners and chainsaws. It is also known as an oil assembly or oil pump. Proper lubrication is essential for the safe and reliable use of a pruner or chainsaw. The oiler is used to provide oil to lubricate the sprocket and chain of the equipment.The sprocket or chain may become worn out or damaged if not properly lubricated, requiring a replacement. Proper oiling of these parts can extend the life of the pruner or chainsaw. Remember to check the sprocket and chain periodically to see if they are properly lubricated. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with a variety of Husqvarna, Craftsman, Weed Eater, and Poulan pruners and chainsaws.

Replace your line trimmer's oil block if you notice oil leaks or poor lubrication. This part helps maintain proper oil flow in your trimmer's engine.

This replacement oil tank for a pole pruner or chainsaw is an authentic OEM replacement part. The inner workings of an engine consist of many moving parts. These parts are mostly made of metal and they thrash about against each other to produce and transfer energy. Engines use oil to lubricate these parts so that they do not rub and create friction as this would cause the engine to overheat. This oil tank lets operators quickly top up their engines with oil without having to take apart the inner mechanics. Oil tanks are made of durable reinforced plastic but it is still possible to bang, dent, or even puncture them. Should this happen, oil will leak from the tank and the engine will be starved of lubrication. For safety purposes, it is important to immediately replace a broken oil tank. To do so, use a wrench to remove the old tank and install the new part with the same bolts. This oil tank is compatible with Poulan and some Husqvarna appliances, and as a high-quality replacement part, it comes sourced from its original manufacturer. This part includes an oil tank and oil tank cap but it does not include an oil line.

Fix oil leaks or low bar lubrication with this chainsaw oil pump fitting. Restores proper oil flow to the bar and chain. Simple repair in 15 minutes.

If your chainsaw isn't lubricating the chain properly or you notice oil leaks, the oil intake line may be cracked or disconnected. Easy 15-minute repair.

This is a genuine replacement oil filter screen that is made for use in select models of chainsaws. This oil filter is made of durable metal and looks like a spring, designed to hold the paper-like filter that catches the debris before it gets into the engine. This oil filter is exposed to a lot of dirt and debris buildup which is why it should be cleaned or replaced as part of routine maintenance. However, replacing the oil filter holder and housing may not need to be done as frequently. Inspect all parts during maintenance for proper operation. If the oil filter becomes damaged or clogged, it will need replaced. This is a genuine OEM oil filter that is manufactured by Craftsman and designed for use in select models of chainsaws from the brand, as well as select units from Poulan, Husqvarna, and Snapper. The oil filter is sold as a single part and does not include hardware or additional components. Be sure to allow the engine to cool entirely before performing repairs and wear gloves to protect the hands. Because the oil filter is a common replacement, some people will keep an extra on hand in case of emergencies.

Replacement oil cap for chainsaw, trimmer, and pruner oil tanks. Tethered design prevents loss. Replace if cracked, broken, or missing threads.

This is a genuine replacement oil filter screen that is made for use in select models of chainsaws. This oil filter is made of durable metal and looks like a spring, designed to hold the paper-like filter that catches the debris before it gets into the engine. This oil filter is exposed to a lot of dirt and debris buildup which is why it should be cleaned or replaced as part of routine maintenance. However, replacing the oil filter holder and housing may not need to be done as frequently. Inspect all parts during maintenance for proper operation. If the oil filter becomes damaged or clogged, it will need replaced. This is a genuine OEM oil filter that is manufactured by Craftsman and designed for use in select models of chainsaws from the brand, as well as select units from Poulan, Husqvarna, and Snapper. The oil filter is sold as a single part and does not include hardware or additional components. Be sure to allow the engine to cool entirely before performing repairs and wear gloves to protect the hands. Because the oil filter is a common replacement, some people will keep an extra on hand in case of emergencies.

Bar adjuster tool for tightening loose chainsaw chains. Angular design makes bar adjustment quick and easy. Simple hand tool for proper tension.