Parts for Bosch SGE53U55UC/A3: Pump Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Fix dishwasher not filling with water or leaking at the water entry point. This inlet ensures proper water flow and prevents leaks where water enters.

The Cover is an OEM part for Bosch dishwashers. It serves as a protective barrier over vulnerable inner components. The cover helps prevent damage from spills, shields electronics from moisture, and blocks access to moving parts for safety.

Cau

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or ove

Fix E4 water flow errors in your dishwasher with this flow meter sensor. Monitors water volume to ensure proper fill levels during wash cycles.

Channels wastewater from your dishwasher to the household drain. Replace if brittle, cracked, clogged, or leaking to restore proper drainage.

Spring-style hose clamp secures water hoses to prevent leaks at connections. Replace if worn, rusted, or if you notice dripping around hose fittings.

Small precision insert that secures and aligns mating components in your dishwasher. Replace when worn, cracked, or missing to restore proper fit.

Reduces hard-water minerals to prevent spotting and buildup on dishes and glassware. Replace when dishes show mineral deposits. Verify fit by model number.

Dishwasher not drying properly or running cool cycles? This temperature sensor monitors water temp and signals the control board for proper heating.

Replace your dishwasher door gasket when leaks appear or the seal feels hard and cracked. Restores watertight sealing. Confirm fit with your model number.

Molded rubber gasket creates a watertight seal between dishwasher components. Replace when cracked, worn, or leaking. Confirm fit with your model number.

Fix cloudy dishes and hard water spots with this water softener regeneration valve. Restores proper brine flow during recharge cycles for cleaner dishes.

Secures threaded connections in your dishwasher to keep components tight and stable. Replace if cracked, stripped, or broken to restore proper fastening.

Replace your dishwasher's detergent dispenser lid if it's cracked, broken, or missing. This cover snaps onto the dispenser to keep detergent secure.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles ca

Dishwasher leaking from the bottom or won't drain? The sump assembly collects and channels water to the pump. Moderate DIY repair with video guide.

Water backing up into your dishwasher tub after draining? The check valve prevents dirty drain water from flowing back in. Moderate DIY repair.

Secures the dishwasher sump or sump cover to the tub for a tight, leak-resistant seal. Replace if missing, stripped, or damaged to restore stability.

Seals the sump area to prevent leaks and ensure proper water circulation and drainage. Replace if cracked, warped, or missing. Verify fit with your model.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

The Drain Pump LID is an OEM part for Bosch dishwashers, designed to securely cover and protect the drain pump assembly. This crucial component ensures that the drain pump is shielded from debris and damage, allowing it to efficiently remove used water

The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the wa

The Sump to Water Inlet Hose is an OEM replacement part for Bosch dishwashers. This hose provides a pathway connecting the dishwasher's sump and water inlet valve. It allows the sump to fill with water during different dishwashing cycles, facilitat

Replacement dishwasher seal creates a watertight connection between components. Replace when leaks or pooling occur. Verify fit with your model number.

Fixes poor cleaning from weak spray arm pressure. This water distributor routes water to spray arms for proper wash circulation. DIY install in 30-45 min.

The Divertor Motor is an OEM part for Bosch dishwashers.  This part controls the direction of water flow within the unit. This motor directs the water to different spray arms based on the selected wash cycle, ensuring efficient cleaning by optimiz

The Heat Pump is an OEM part for Bosch dishwashers. This pump works to circulate air within the dishwasher during the drying cycle, helping to remove moisture from washed dishes.

Causes of a bad heat pump can include a malfunctioning heati

The Heat Pump is an OEM part for Bosch dishwashers. This pump works to circulate air within the dishwasher during the drying cycle, helping to remove moisture from washed dishes.

Causes of a bad heat pump can include a malfunctioning heati

The Heat Pump is an OEM part for Bosch dishwashers. This pump works to circulate air within the dishwasher during the drying cycle, helping to remove moisture from washed dishes.

Causes of a bad heat pump can include a malfunctioning heati

Secures the hose between pump and heater in your dishwasher. Replace if loose, damaged, or causing leaks. Confirm fit with your model number.

Does your dishwasher shake or make loud noises during the wash cycle? A worn suspension damper may be the cause. This part absorbs vibration and stabilizes the tub.

Fix E24 or E25 error codes with this dishwasher drain pump. Solves noisy pumping, slow draining, and drainage failures. Moderate DIY repair.

Flexible plastic tube that routes water between dishwasher components. Replaces cracked, split, or worn tubes that cause leaks or water pooling.

Replaces the rotating spray arm shower head in your dishwasher's upper rack. Install a new one if yours is cracked, broken, or keeps falling off the tube.

Fix poor cleaning and weak spray with this dishwasher spray arm. Replaces cracked or clogged arms that cause spotty dishes. Easy 10-minute repair.

Dishes not getting clean? A damaged or clogged spray arm prevents proper water distribution. This rotating arm restores even spray coverage and performance.

The Cover is an OEM part for Bosch dishwashers. It provides a protective barrier that shields internal components from damage and extends the life of the appliance.

The cover is exposed to heat, humidity, and debris during each wash cycle.

Traps small food particles and debris in your dishwasher to prevent clogs. Replace if damaged, torn, or when cleaning performance declines. Confirm fit with your model number.

Captures debris before it enters the pump system. Replace when clogged, calcified, or damaged to prevent E22 errors and ensure clean dishes. Verify fit.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.