Brad September 11, 2014 for Model Number FEF366ECD When I turn my oven on the BAKE function it does not heat up. It will heat up in the BROIL function but not BAKE. Is it the bottom heating element?
1 Answer Hello Brad! You'll need to test for 240v going to the bake element part number 316075103. If there is power at the element and it isn't working you'll need to replace the element. If there isn't any power you'll need to check the wiring and replace the electronic control board part number 5304509493. Thanks. Read More...
Ed In Tampa September 07, 2014 for Model Number FEFL78CBC Range is 10 years old and was functioning perfectly until last week. The clock and range top work fine, but suddenly neither broiler or oven heating elements function. I'm guessing the control panel is the source of the problem, but I have no error code and the lights on the panel light up showing that the elements are on and the oven is preheating. Help.
1 Answer Ed, With both the bake and broil no longer working, this issue would be with the electronic board or with the wiring to the elements. The control board would be the most likely culprit. Read More...
Mick April 11, 2014 for Model Number cgef3055kff The oven is a Frigidaire, the bottom element does not work but the top element does. We had the bottom element check and it was fine. So could it be the clock?
1 Answer Hello Mick! If you have 240v going to the element and it is not working you have a bad element. If you do not have 240v going to the element you'll need to check the wiring and replace the electronic control. Thanks. Read More...
Jennifer February 24, 2014 for Model Number 35-302251-05-0 Over the last 2 weeks, when I go to turn on my oven, the smell of gas fills the room. There has been a couple times when it hasn't turned on right away (I have to turn off then turning on second time it warms up) but mostly, when it gets turned on, there is a strong odor of gas when it's cooking. Everything else works fine. Any idea what it could be?
1 Answer Jennifer, In most cases a unit that is omitting a gas odor in the oven without lighting would be caused by a weak igniter, igniter out of position or a faulty oven valve assembly. Read More...
Joe February 21, 2014 for Model Number fef352awg Its seems apparent that after reading many of the questions asked on the control board for frigidaire range tops when the broiler and bake elements don't work that the control board was to be at fault. My stove is about 8 years old and have had the same malfunction. At the cost of the part and with the stove bring $324 new, do you know if there was a recall on this part or is this just another disposable appliance? Thanks Joe
1 Answer Hello Joe! Unfortunately, we do not have recall information available. This is something you will need to inquire with the manufacturer on. Thanks. Read More...
Matt February 17, 2014 for Model Number FEFL78CBC Frigidaire Range Oven was working, then a "pop" followed by breaker flipping. Flipping breaker back on the stove tops still works, but all lights in the clock/stove controls are out and nothing works in the oven. The elements looks ok but have not checked them. Would element failure cause all lights in the stove control board to go out?
1 Answer Hello Matt. No, it sounds like when the bake element burnt out, it shorted the clock assembly and it will need to be replaced. Read More...
Bob January 15, 2014 for Model Number Fef379ach All displays work from eoc but neither heat element in oven comes on. Is there a fuse somewhere?
1 Answer Hello Bob. No, if there is no power to the elements from the board, you will need to replace the board in the unit. Read More...
Mike December 12, 2013 for Model Number Model #GSE3WZCCC serial # VF40624075 Power is fine to the range. The glass top works but the broil and bake elements do not work ( Both elements are fine). No codes are present and the controls work as they always have. There is power in L2 in but no power out of L2 out when set on bake or broil. The door switch works fine and so does the RTD. Could it be the control board. Have cycled the power multiple times.
Maria December 02, 2013 for Model Number 316417734 My oven shut off and comes on when it wants to dont know what to do.
1 Answer Maria, If the oven is coming on by itself without hitting any control then you will want to replace the oven control board on the unit. Read More...
Jerry December 01, 2013 for Model Number FEFL78CSA I'm getting power to both heating elements but the stove won't heat on bake or broil. Is both elements out?
1 Answer Hello Jerry. If there is 240 volts at the elements, and they do not heat, they are bad. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...