Michelle S. July 15, 2011 for Model Number ples389ecd My husband was using the stovetop and one of the contron knobs broke. When he pushed it back in its slot, it moved too far and he heard a sort of pop that he said sounded like a breaker popping. When that happened, it shut down my control panel on the front with the clock, timer and oven controls an it will not turn back on so I cannot use my oven. Help?
1 Answer Hi Michelle. The best thing to do is to keep the circuit breaker turned off. Remove the control panel and investigate if the switch body broke and shorted out there physically. This should only be the part you need other than to properly insure the shorted wires are Ok to use again. If The switch is on the far right, it is part # 316441804. If It is any of the other three it is part # 316441801. Thank you. Read More...
Stan H. July 15, 2011 for Model Number frigidaire professional smooth top I changed 316418735. I still get F-30 error. The top works, oven locked and warmer will not come on. The clean will start not sure if working.
1 Answer Hi Stan. What is your exact model # ? We need this to assist you further. It will be behind the storage drawer, or access pane. Thank you. Read More...
Cesar M. July 07, 2011 for Model Number PLES389ECC What could be wrong if the oven on this range comes on by themselves?
1 Answer Hello Cesar. If the oven is coming on without being turned on, you will need to check for a stuck button on the control panel 318313830. If there is a stuck button, you will need to replace the control panel. Hope this helps. Read More...
Harry W. June 24, 2011 for Model Number ples389ec The broiler & oven do not work getting f13 error. Shut circuit breaker off and on still nothing. Top & clock work fine. Do I need A new control board?
1 Answer Hello Harry. You will need to test the thermal shut offs 318005212, 318003624, and 318003614. They should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Tim May 23, 2011 for Model Number ples389ecb I have a Frigidaire range model ples389ecb. Things were fine, until wife noticed that the panel was not on. Checked the breaker which was fine. If the breaker is tripped the unit comes back on and panel lights up but goes off. I checked the little red button resets on back and near right side burner knob on front and they are fine. I do hear the beeper module on the board making a chirp sound and when you open the door the lights will flash on off at times. The range top works fine. Do I need a control panel?
1 Answer Hello Tim! If you have have checked your units thermal cut-off switches, then it is likely the control board has failed. That is part 316418735. I hope this info helps. Read More...
John T. May 09, 2011 for Model Number ples389ecd I am receiving an f30 error. Top works oven doesnt. Probe reads 1100 ohms, thermo disc reads 0. Can it be anything other than the EOC?
1 Answer Hello John. If the probe is good and all the thermal cut-offs test good. Then you will need to replace the EOC 316418735. Hope this helps. Read More...
Nathan March 31, 2011 for Model Number ples389ece I had an unfortunate accident and my first burner shorted out. I wired passed it and the everything worked great except that burner. however, 2 months later I attempted to run the clean cycle it popped a F20 Error. Ever since the oven doesn't work. I turn it on and it runs for bout 20 seconds, and it seems that as soon as the top burner would be kicking on it pops an F20 error again and I have to reset the power to get anything to function. I took it apart and tested it and found that when the code pops the relay for the "bake" wire throws a small spark (I can only see it inside of the reley(It doesnt arc to anything else)) Anyway I wanted a second opinion before i bought a new control board.
1 Answer Hello Nathan. You will need to replace the control board if the relay is sparking. F-20 is a control board error. Also you need to repair the burner that you bypassed. Hope this helps. Read More...
1 Answer Hello Carol. An F90 error code on your range means Maximum oven door unlock time exceeded. Here are some steps to try to determine what is causing the code. 1. (F90, 91, 92, 93 & 94) Check the wiring between Electronic Control & Lock Motor Micro Switch. 2. (F90, 91, 92, 93 & 94) Replace the Motor Door Latch assembly if necessary. 3. (F90, 91, 92, 93 & 94) Check for binding of the Latch Cam, Lock Motor Rod & Lock Motor Cam. 4. (F90, 91, 92, 93 & 94) Check to see if Lock Motor Coil is open. If open, replace Lock Motor Assembly. 5. (F90, 91, 92, 93 & 94) Lock Motor continuously runs - if Micro Switch is open, replace Lock Motor Assembly. 6. If all situations above do not solve problem, replace Electronic Control. Hope this helps. Good luck. Read More...
Matt March 20, 2011 for Model Number CPLES399EC Hi there, I am getting an error code F13 any time I try to use the broiler, the only way to reset it is to turn the breaker off/on. Everything else works, but I can't broil. It sounds like I may have to replace the EOC/clock, but before I do that expensive change, I am wondering if you have any ideas?
1 Answer Hello Matt. A F13 code on your model typically means that the electronic control is faulty. One thing you can try is Disconnect power, wait 30 seconds and reapply power. If fault returns upon power-up, replace the electronic control. Hope this helps. Read More...