Chris July 24, 2016 for Model Number LFFU14F5HWN Freezer compressor will not come on. Light inside works, so it is getting power. High temp light did not come on when temp raised. How can I check to find out which part I need? We had a power outage a day before it stopped working.
1 Answer Chris, You will want to check power at the compressor to see if there is 120 vac to the compressor start relay and overload. If there is no power then the issue will be with the control board. If there is power then the issue will most likely be the overload/relay. Read More...
Rodney July 12, 2016 My freezer keeps reading off. What does this mean? It might up on the inside but motor is not running.
1 Answer Hello Rodney. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Kappa May 28, 2016 for Model Number frigidaire gallery refrigerator #FGHB2866PF We just bought this model at a significant discount due to it being returned to the store due to the fact the temp display on the outside of the door was only showing partial numbers. The salesperson assured us this could be fixed under the warranty. Any idea if this will be a simple fix or is an indication of a greater problem? Thanks!
1 Answer Kappa, It shouldn't be that difficult a repair to make. You may want to check and remove the top hinge cover and make sure there are no loose connections at the wire harness. If the machine operates and is cooling, then the most likely issue is a dispenser control board assembly 5304527930. Since we don't know what is in the display (error code or scrambled display) you might need the main control board 242115283 but we won't know,for sure until the tech arrives and diagnoses the problem. Either way, it shouldn't be an extensive or time consuming repair. Read More...
Ed January 02, 2016 for Model Number LFFU14F5HWA Control board (297241800) display shows only partial numbers. Freezer will not run. I can apply jumper from pin 1 to 2 or pin 1 to 3 with the control board removed and it will run. i have tried to find a pin out diagram for this board with no success. Does this appear to be a bad control board or some other component?
Chris December 23, 2015 for Model Number lffu14f5hwh Your question: "hi we have Frigidaire freezer, upright,LFFU145HWH, the seal on the bottom does not look very good so I have got one coming. While I am waiting I duck taped the seal up, the problem I am having is the door ajar alarm keeps going off.
1 Answer Chris, You will want to make sure that the door switch is being met by the door and that there is no ice built up that would cause the door to stay open slightly. Also make sure that the door is not sagging. This may be just a simple adjustment to the door. Read More...
Introuble79 November 29, 2015 I have a frigidaire upright freezer in which the temperature control is on the door. My question is does the hi temp button supposed to light up green.
1 Answer Introuble79, Normally the high temp light will stay off and only flash or come on when the unit has reached a high temp. Typically if it is designed to be on then it will be green and then switch to red if high temp is reached. We would need to have the model number to be able to assist better. Read More...
Vanella November 16, 2015 for Model Number FFU21F5HWB At first my control panel was stuck on "0". I unplugged and now it let me sets the temperature. But now the freezer is not getting cold. I do not hear the compressor or any noise from it. What could be the problem?
1 Answer Hello Vanella. If the unit is not tuning on, it sounds like the control board is bad and will need to be replaced on the unit. Read More...
Spk3z September 22, 2015 for Model Number FFHS2311PF5 Hello, I am having problem with a Fridge make: frigidaire that is not cooling. I have an error code E26 E27 saying its HI temp on freezer and fridge. I would unplug the unit and replug fridge would start compressor and cond. fan runs about 5 min then shuts off. ran a self test and everything checked out ok. Erased error code worked for a whole day. Now the same problem occurs. Any help would be appreciated.
1 Answer Hello Spk3z. Based on the information you provided, it sounds like the control board 5303918341 is bad and will need to be replaced on the unit. Read More...
Velma August 03, 2015 for Model Number FFU17F5HW My door ajar will not stop beeping even though door is closed tight. What could be the problem?
1 Answer Hello Velma, The most common cause of the complaint you posted is the control 297370600. Read More...
Phil I April 24, 2015 for Model Number LFFU14F5HWL Dog chewed the wires going up into the door. It didn't hurt anything, but I put a metal plate over that area and didn't realize that everytime I open the door its was cutting the wires. It cut three wires into blue, green, black and blew the circuit breaker. I took the door off and fixed the wires and it works but runs non stop and shows it to be 0 degrees very cold the controller on the door shows working. You can change the number but does nothing to make it stop running (compressor) the controller on the door is part NUMBER AP5318915 could this be the problem even though it shows its working (I can still change the number) thanks
1 Answer Phil, The User control board would be a likely suspect since the unit did have the wires cut to the door and caused a spark. If the user control does not repair the unit then the door would need to be replaced. Read More...