Ruben Leal August 20, 2018 for Model Number LAFW3511KB0 The door on my washing machine broke, and to fix it...I'm having to order a new hinge, outer door panel, inner frame and door strike. My question is...do the replacement parts come with new screws? Or do I need to re-use the original ones? Thanks in advance.
Carrel W June 15, 2018 for Model Number ATFB6000ES0 Regarding replacing the hinge, is there any way to order just the plastic pieces (two) that cover the pins of the hinge or do I need to order an entire new hinge? The old hinge is perfectly fine except for the two plastic pieces that cover the pins of the hinge.
1 Answer Carrel, Unfortunately the door hinge bushings are not showing as a separate part and would have to get the hinge to get them. Read More...
Chris December 20, 2017 for Model Number ATF7000ES0 While replacing the door hinge, a flat metal part dropped into the machine from the back. I was hoping that I would be able to screw new hinge into existing holes, but of course, there was nothing there to screw into. So now the door will not go on. It appears that I have to open the entire machine to get that part back into place so screws have something to screw into. Has this ever happened before?
1 Answer Hello Chris, These are normally affixed with a piece of double-sided tape but I suppose the manufacturer saved a bit of money in the manufacturing process of your machine. I'm sorry but we have no control over the manufacturers and their assembly processes. Thank you for your patience and understanding in this matter. Read More...
Penni November 18, 2017 for Model Number ATF6000FSI Can the door hinge be tightened to stop it from sagging rather than replace the whole hinge
Ray March 30, 2016 for Model Number Atf6000fs1 Do you have a video on replacing hinge on this washer?
1 Answer Hello Ray. Sorry we do not have a video at this time. We are working daily at adding new videos to our site. Read More...
Bill January 22, 2016 for Model Number Frigidare front loader model FAFW3001LW0 Two Issues, but I feel the first one, (Hinge) has been answered by the sagging door questions answered in this forum. That is what mine does. The second issue may have been caused by the first one. After 4 years, lifting the door to close properly has worked till now. I close the door, push the start button, the lights come on and the time displays. Just like normal. Problem is "Nothing Happens" at that point. I push the start button again, the sensing light comes on, but the "Door Lock" light is off. The timer display goes from the "set time" to saying pause, back and forth every 5 seconds and keeps repeating. My take is that the "Door Lock" switch is broken and possibly the plastic striker that goes into the lock mechanism may be worn. I am looking for a second opinion before dropping $$$ on a switch and striker. .
1 Answer Hello Bill, The door switch 131763256 is a common failure on this design. I would first verify the door hinge assembly 134550800 is not worn and causing the door to strike too low. This can actually cause issues with the proper striking of the door. Read More...
1 Answer Hello James. In order to replace the hinge, you will need to open the door and remove the screws securing the hinge to the cabinet of the unit. Then lift upward to remove the door and hinge from the cabinet. Lay the door on a soft surface and disassemble the door to remove the hinge and replace it. You can take pictures of disassembly to help with the reassembly of the unit. Read More...
Beth June 07, 2015 for Model Number Hinge Part Number: AP3886714 Made by: Frigidaire I ordered a new door panel since it was cracked. However, while taking the door off the lower part of the hinge broke so now I need to order a new hinge. The old screws are getting stripped. Does the hinge come with new screws or can I order a new set of three? If so what is the part number for the screws?
1 Answer Beth, Sorry but, No the mounting screws do not come with the washer door hinge 134550800 You will need to order a quantity of three(3) screws 137380600 to replace the stripped mounting screws. Read More...
Cynthia December 28, 2014 for Model Number FAFW3574KW0 Can just the spacers or bushings be replaced on the door hinge instead of purchasing the entire hinge part?
1 Answer Cynthia, The hinges come with the bushing and they cannot be gotten without buying the hinge 134550800. Read More...
1 Answer Hello Anna. Unfortunately front load washer doors are not reversible at the moment, thanks! Read More...