Jennifer September 20, 2016 for Model Number PLD2855RFC1 The only buttons that will come on are associated with the pots and pans setting. I can't press start or change to a different setting. Do I need to replace the touchpad?
1 Answer Jennifer, Yes, Start by replacing the 154459903 / 154459903 Insert/key pad assembly. The part is in stock and available at this time. Based on your post description, the keypads and key pad ribbon have started to degrade and aren't making contact when pressed. Thanks Read More...
Musi July 22, 2015 for Model Number PLD2850RD I keep getting the "CL" display. At first I thought that the latch assembly wasn't reading correctly that the door was already closed but apparently I replaced the wrong part; I just replaced the Latch assembly (Part # 154529403) but keep getting the CL code. Any sugesting on what part to purchase?
1 Answer Hello Musi. Make sure the strike is good and the harness is good. If so, you will need to order and replace the control board on the unit. Read More...
Dennis R August 04, 2014 for Model Number PLD2850RDC1 My dishwasher will allow me to program the pots and pans 99 minute wash, but I can now longer program the regular wash cycle. When I push the touch pad, no numbers appear and I cannot get the cycle to begin. do I need to replace the main circuit board?
1 Answer Hello Dennis. It sounds like you need to order and replace the insert 154459903 on the unit. Read More...
Darren May 08, 2014 for Model Number pld2855rfc3 About 20 min in wash cycle flashes PF changed control board and still does it could it be the control panel causing this checked all the wires and volts coming in all good ? tks for your help
1 Answer Darren, Based on the description it sounds like there is a power supply problem with either the connection at the power supply box at the base of the dishwasher, or possibly a bad breaker. Read More...
Ian April 19, 2014 for Model Number Frigidaire PLD2855RFC1 The buttons have essentially stopped working and it happened out of the blue. Everything worked fine and then all of the sudden only certain settings would work. After that we would push the "Start/Cancel" button and it would cancel. Then within a few minutes that button stopped responding as well. As of now the only button that works is the "Lower Rack Only" button but the start button doesn't work so it;s useless. Our only way of stopping that cycle after pushing the button is to shut off all power to the dishwasher. My guess is that there is a short somewhere but I don't know if it's the control panel, board, or something else. Any help would be appreciated. Also, if you think it's the control panel or board and it turns out not to be is the part returnable? Thanks for your help. You are an awesome organization!
1 Answer Ian, Based on the description, the issue that you are having sounds like it would be caused by a faulty keypad which is part number 154459903. All parts carry a 365 day guarantee. Read More...
Mark L April 01, 2014 for Model Number PLD2850RDC0 Some of the buttons on the display panel don't work anymore, do I need to order the insert AP3560813 or the Board AP3554679? If it's the insert how does that attach? it looks like it sticks on i don't see any screws or tabs where it comes off.
1 Answer Hello Mark. Based on the information you provided, you will need to order and replace the insert 154459903 in the unit. Read More...
Mike S. December 24, 2013 for Model Number PLD2855RFC0 (Frigidaire Professional Series) This dishwasher worked flawlessly until I used the "Delay Start" button for the first time. Since then, I seem to be unable to program the dishwasher in any cycle. It will randomly start on its own, run partial cycles before shutting off, and provide bogus displays. By pressing any of the buttons, other than the "START/CANCEL" button (which does nothing), the unit will cycle between showing a 96 minute display to running with a blank display to turning off. This happens with all of the buttons, including the "Delay Start." Repeatedly pressing the "No Heat Dry/ Lock" button will sequentially display numbers 1 thru 8 and seemingly cycle the unit through different wash cycles (per the changes in sound). Turning off the power for extended periods has made no difference. In fact, when the power is turned back on, the display remains blank, instead of displaying the typical "PF" indicator. Is all of this bizarre behavior due to a faulty touchpad, or do I need to just replace the main PC control board? It doesn't seem as though all of the buttons on the touchpad should suddenly start doing weird things... all at once. Any advice? Thanx...
1 Answer Hello Mike. It sounds like the insert 154459903 is bad and will need to be replaced on the unit. Read More...
Diy September 21, 2013 for Model Number pld2850rdc1 Is the touch pad ribbon part easy to install for a diy, girl? Our "light wash" options work, but our start/delay and the normal dish cycles won't work, when the button is pushed. Thank you for your help!
1 Answer DIY, To replace the touchpad ribbon, you would disconnect the power from the unit. Once disconnected you will remove the screws holding the inner liner in place. Lift the inner liner and disconnect the ribbon harness from the control board. It may be necessary to remove the control board in order to get the harness in and out. Peel the touchpad from the front control panel of the unit and install the new one and reassemble. Read More...
Michael January 20, 2013 for Model Number Pld2855rfc0 My dishwaher pld2855rfc0 is not staying on. When we press normal wash, the number 96 appears on the front panel, which means we have 96 minutes to the run the full cycle. Unfortunately the number 96 (or sometimes it runs down to 89) starts to dim or blink and then just stops. We then get a blinking PF on the front panel. Then we hit the cancel button, and try again. Most of the time it stays on for a second or two and then stops again. What part should i order to fix this problem? Thanks.
1 Answer Hello Michael, You will want to check the main power coming into the unit under the toe panel. Check to make sure that you are getting no less than 108 vac and no more than 132 vac. If you are getting outside this range then you will need to check home supply line. You will also want to check the heater circuit to make sure that it is good. Check wiring to make sure that there are no broken or loose wires. If all this checks ok then you will need to replace the control board. Read More...
Jim June 27, 2012 for Model Number FDB2810LDC1 On my touchpad, the Start/Cancel control is unresponsive. Do I need a new touchpad?
1 Answer Hello Jim, This sounds like either a bad connection or the touch pad you mentioned. First thing you should try is to open the door assembly and unplug the ribbon cable that attaches the touch pad to the control board. Using a pencil eraser and only rubbing in the direction of the traces, use the eraser as you would erase, to clean the traces. If upon re-assembly, the unit still doesn't work, replace the touch pad 154568603. Read More...